-
Mo-Clamp 1000 Handy Hook
MO-Clamp 1000 Handy Hook – A great time saver with Mo-Clamp’s easy hook-up system. No chain is too long and no hooks are needed on the chain. Alloy heat-treated steel. Pulling slots can be used with #0900 Hole Pull Adapters. Designed for use with 3/8″ chain.
Overall Length: 6″ (165 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$89.03$113.05Mo-Clamp 1000 Handy Hook
$89.03$113.05 -
Mo-Clamp 1100 Handy Link
MO-Clamp 1100 Handy Link – Chain too long? Make it shorter! Chain to short? Make it longer! Alloy heat-treated steel. Pulling slots can be used with #0900 Hole Pull Adapters. Designed for use with 3/8″ chain.
Overall Length: 6-1/2″ (165 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$104.67$132.92Mo-Clamp 1100 Handy Link
$104.67$132.92 -
Mo-Clamp 1150 Chain Spreader Bar
MO-Clamp 1150 Chain Spreader Bar – The Chain Spread Bar enables the body man to make pulls around box rails or other obstacles, while maintaining the distance between pulling clamps.
Overall Length: 11″ (280 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$116.96$159.13Mo-Clamp 1150 Chain Spreader Bar
$116.96$159.13 -
Mo-Clamp 1200 Twin Pull
MO-Clamp 1200 Twin Pull – Do you have need for a light pull but a larger gripping area? The Twin Pull enables you to use two clamps side by side for more pull. Also, can be used with two #1300 Sill Hooks. Designed for use with 3/8″ chain.
Overall Length: 5″ (127 mm) Width: 3″ (76 mm) Between Pulls Capacity: 6 tons (5,443 kg) Heat Treated Steel. Made in the U.S.A.
$96.32$131.05Mo-Clamp 1200 Twin Pull
$96.32$131.05 -
Mo-Clamp 1250 Panel Puller
MO-Clamp 1250 Panel Puller – The Panel Puller is light and easy to use with a slide hammer or pulling post. Use the Panel Puller on fender openings, deck lids, door posts and other openings. Heat-treated alloy steel.
Overall Length: 8″ (203 mm) Width: 3″ (82 mm) Capacity: 3 tons (2,722 kg) Heat Treated Steel. Made in the U.S.A.
$93.59$127.34Mo-Clamp 1250 Panel Puller
$93.59$127.34 -
Mo-Clamp 1255 Large Panel Puller
MO-Clamp 1255 Large Panel Puller – A perfect companion to the smaller 1250, the large panel puller allows the technician to increase the length of contact when pulling a panel into shape. Made of Mo-Clamp Tru-tuff steel alloy, this tool will last a lifetime and is covered by the Mo-Clamp “Forever” warranty. Use it in any situation where you need to get behind a pull. Made in USA.
Capacity: 3 tons (2,722kg) Length: 9″ (22.86cm) Pulling Surface: 4.75″ (12.06cm)
$144.23$211.33Mo-Clamp 1255 Large Panel Puller
$144.23$211.33 -
Mo-Clamp 1300 Sill Hook
MO-Clamp 1300 Sill Hook – One of the handiest tools in the shop for a quick pull almost anywhere. New round opening allows for pulling with a slip hook. New casting process makes for a tighter grain structure, resulting in more strength. The original straight-cut tooth design pattern is machined for superior gripping and pulling power. Sill Hook end is 2-1/2″ wide.
Gripping Surface: 2-1/2″ wide (63 mm), 1″ deep (25 mm) Overall Length: 8-1/2″ (216 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$137.56$201.56Mo-Clamp 1300 Sill Hook
$137.56$201.56 -
Mo-Clamp 1320 Slim Line Sill Hook
MO-Clamp 1320 Slim Line Sill Hook – Use this new hook from Mo-Clamp to pull front hinge pillars, center pillars posts, rear hinge sections or any location where you need a broad, thin pulling surface. Made from Mo-Clamp Tru-Tuff drop-forged, heat-treated alloy steel with a pulling capacity of a full 4 tons. Heavy duty eye nut allows easy connection with Mo-Clamp chain and slip hooks.
Throat Depth: 4-3/4″ (107 mm) Overall Length: 11-1/2″ (248 mm) Capacity: 2.5 tons (2,268 kg) Heat Treated Steel. Made in the U.S.A.
$331.74$497.55Mo-Clamp 1320 Slim Line Sill Hook
$331.74$497.55 -
Mo-Clamp 1340 Bolt Puller
MO-Clamp 1340 Bolt Puller – Made for those difficult to get at suspension and frame bolts that need the area they screw into realigned or straightened. Use this for up to a 2.5 ton pull and be certain you are dead center over the bolt area. Uses the oem bolt to pull against the threads with. Just loosen the bolt enough to get the tool cradle under the head and re-tighten a few turns to assure no thread loss and pull away.
Overall length: 6″ (152mm) Capacity 2.5 tons (2.268kg) Made in USA
$79.48$108.14Mo-Clamp 1340 Bolt Puller
$79.48$108.14 -
Mo-Clamp 1350 Versa Hook
MO-Clamp 1350 Versa Hook – The Versa Hook is a versatile tool used as an outer track tie-down to secure vehicles during pulls. It is used as a pulling device for rocker panels, door posts, windshield posts, etc. Original straight-cut tooth design. Versa Hook end is 2-1/2″ wide.
Gripping Surface: 2-1/2″ wide (63 mm), 1″ deep (25 mm) Overall Length: 8″ (203 mm) Width: 2-1/2″ (63 mm) at end Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$216.35$324.49Mo-Clamp 1350 Versa Hook
$216.35$324.49 -
Mo-Clamp 1360 Junior Versa Hook
MO-Clamp 1360 Junior Versa Hook – The Junior Versa Hook is designed smaller to allow body men to get into tighter areas. The Junior Versa Hook end is only 1-3/4″ wide for pulling on rocker panels, door posts, etc. The back lip is used for a tie-down to secure the vehicle during pulls. The narrow width permits use on frame racks with smaller slots. Designed for use with 3/8″ chain.
Gripping Surface: 1-3/4″ wide (45 mm), 1″ deep (25 mm) Overall Length: 9″ (229 mm) Width: 1-3/4″ (45 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$175.83$257.62Mo-Clamp 1360 Junior Versa Hook
$175.83$257.62 -
Mo-Clamp 1450 Numerous Angle Puller
MO-Clamp 1450 Numerous Angle Puller – The NAP allows pulls from any angle. Just put the bolt through a 1/2″ hole and pull. Use with #2100 or #2400 Multi-Adapter Plates, or with back-up plates. Designed for use with 3/8″ chain.
Overall Length: 6″ (152 mm) Capacity: 4 tons (3,629 kg) Replacement Parts: #5245 Nut, Bolt, & Washer Heat Treated Steel. Made in the U.S.A.
$74.81$101.78Mo-Clamp 1450 Numerous Angle Puller
$74.81$101.78
