-
Mo-Clamp 1500 Pull Ring
MO-Clamp 1500 Pull Ring – The Pull Ring for the #2100 2MA Adapter Plate for unlimited body and frame pulls, such as frame horns, brackets, cowls, etc. Has recessed pockets to hold bolts stationary for easy, one-handed tightening.
Overall Length: 4-1/2″ (114 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #5350 Nut & Bolt Heat Treated Steel. Made in the U.S.A.
$96.32$131.05Mo-Clamp 1500 Pull Ring
$96.32$131.05 -
Mo-Clamp 1600 Multi-Anchor Hook
MO-Clamp 1600 Multi-Anchor Hook – A valuable, small hook device for use on both conventional frames and unitized bodies. The different ends are used for a variety of pulls and anchoring. The bottom foot can be used with both Mo-Clamp #2100 and #2400 Multi-Use Adapter Plates for strut alignment corrections.
Overall Length: 7-1/2″ (191 mm) Capacity: 4 tons (3,629 kg) Heat Treated Steel. Made in the U.S.A.
$119.25$162.25Mo-Clamp 1600 Multi-Anchor Hook
$119.25$162.25 -
Mo-Clamp 1650 Double Eye Chain Hook
MO-Clamp 1650 Double Eye Chain Hook – A handy chain hook-up pulling plate for making double pulls. The special design allows for both wide or narrow pulls. Double pulls, using multiple self-tightening clamps, can be made from the same pulling tower or pulling post. Features Mo-Clamp easy chain hook-up system. Designed for use with 3/8″ chain.
Overall Length: 6-1/2″ (165 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$146.77$199.69Mo-Clamp 1650 Double Eye Chain Hook
$146.77$199.69 -
Mo-Clamp 1700 Chain Locking Fork
MO-Clamp 1700 Chain Locking Fork – Handy stopper for chain. Used to maintain chain tension while adjusting for pulls. Locks chain tight. Heat-treated alloy steel. Designed for use with 3/8″ chain.
Overall Length: 6″ (165 mm) Capacity: 6 tons (5,443 kg) Heat Treated Steel. Made in the U.S.A.
$103.69$131.67Mo-Clamp 1700 Chain Locking Fork
$103.69$131.67 -
Mo-Clamp 1800 Track Hook
MO-Clamp 1800 Track Hook – Quick tie-down for track systems or back anchoring on frame racks. Lip can be used for pulling damaged areas; varied multiple uses for chain lengthening or shortening. Slot can be used for chain hook-up. Designed for use with 3/8″ chain.
Gripping Surface: 3″ wide (76 mm) Overall Length: 6″ (165 mm) Capacity: 6 tons (5,443 kg) Heat Treated Steel. Made in the U.S.A.
$110.08$149.77Mo-Clamp 1800 Track Hook
$110.08$149.77 -
Mo-Clamp 1850 Inline Slider
MO-Clamp 1850 Inline Slider – New generation of Mo-Clamps. Self-tightening. Made of heat-treated Tru-Tuff steel alloy. Grabs on to flanges and provides a sure grip while pulling “in-line”. Finger grips are cast into the tool to provide easy handling while positioning the clamp.
Gripping Surface: 3″ (76 mm) Overall Length: 7″ (178 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #185005 Jaw “A”, #185006 Jaw “B” Heat Treated Steel. Made in the U.S.A.
$155.59$227.97Mo-Clamp 1850 Inline Slider
$155.59$227.97 -
Mo-Clamp 1900 Quick Hook
MO-Clamp 1900 Quick Hook – Four hole-size selection for quick hook-ups in existing frame holes for pulling of damaged frames. Uses Mo-Clamp’s easy chain hook-up system. Hole sizes: 1-7/8″ (48 mm), 1-5/8″ (41 mm), 1″ (25 mm), 7/8″ (22 mm).
Overall Length: 6-1/2″ (165 mm) Capacity: 4 tons (3,629 kg) Heat Treated Steel. Made in the U.S.A.
$115.58$157.25Mo-Clamp 1900 Quick Hook
$115.58$157.25 -
Mo-Clamp 2100 2Ma Multi-Adapter Plate
MO-Clamp 2100 2MA Multi-Adapter Plate – Designed for most foreign and domestic vehicles with Mac-Pherson suspension, the 2MA fits approximately 95% of the various strut bolt patterns. The 2MA Plate also offers unlimited body and frame pulls with a variety of compatible accessories. Can be used on damage to door posts, frame horns, brackets, cowls, or rear axles. Use a #1450 Numerous Angle Puller (NAP) or #1500 Pull Ring for fast hook-ups and a variation of pulls. Includes three 4-way legs. Large-base legs give good support for pulling, with four hole sizes to accommodate most vehicles.
Overall Length: 9″ (229 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #5230 Bolt & Washer, #9450 Leg, Bolt & Washer Heat Treated Steel. Made in the U.S.A.
$459.03$688.46Mo-Clamp 2100 2Ma Multi-Adapter Plate
$459.03$688.46 -
Mo-Clamp 210060 Replacement Horizontal Bracket
MO-Clamp 210060 Replacement Horizontal Bracket
$87.14$118.56Mo-Clamp 210060 Replacement Horizontal Bracket
$87.14$118.56 -
Mo-Clamp 210070 Replacement Vertical Bracket
MO-Clamp 210070 Replacement Vertical Bracket
$85.31$116.07Mo-Clamp 210070 Replacement Vertical Bracket
$85.31$116.07 -
Mo-Clamp 2400 3MA Multi-Adapter Plate
MO-Clamp 2400 3MA Multi-Adapter Plate – Designed for a wide variety of strut towers. Permits fast hook-ups and pulling in any direction. Allows center strut tower measurements with tram gauge instruments. Gives additional versatility for pulling over and around obstructions such as fenders. Also use in conjunction with #1450 Numerous Angle Puller (NAP) to give it even more versatility. Includes three 4-way legs. Large-base legs give good support for pulling, with four hole sizes to accommodate most vehicles.
Overall Length: 9″ (229 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #5230 Bolt & Washer, #9450 Leg, Bolt, & Washer Heat Treated Steel. Made in the U.S.A.
$543.44$815.06Mo-Clamp 2400 3MA Multi-Adapter Plate
$543.44$815.06 -
Mo-Clamp 2450 Boltless Strut Tower Puller
MO-Clamp 2450 Boltless Strut Tower Puller – Easy, fast, reliable method for pulling strut towers. Developed for strut towers without bolts, to correct chassis dimensions to factory specifications. Strut tower removal is necessary.
Overall Length: 5″ (127 mm) Capacity: 3 tons (2,722 kg) Replacement Parts: #4051 Eye Nut, #100441 Numerous Angle Puller, #500053 Bolt Heat Treated Steel. Made in the U.S.A.
$268.42$402.58Mo-Clamp 2450 Boltless Strut Tower Puller
$268.42$402.58
