-
Mo-Clamp 3071 Mo-Ty Chain Tie Down Anchor Pull Pot
MO-Clamp 3071 MO-TY Chain Tie Down Anchor Pull Pot – The harder you pull the firmer it wedges. Allows full 360 degrees of pull without chain touching floor. Can be removed and installed in a different location. When correctly installed, top is flush with floor when not in use. Can be easily cleaned by lifting top. A 3-1/2″ (89mm) cored hole is required in concrete floor.
Capacity: 10 tons (9,072 kg) Heat Treated Steel. Made in the U.S.A.
$110.10$149.80Mo-Clamp 3071 Mo-Ty Chain Tie Down Anchor Pull Pot
$110.10$149.80 -
Mo-Clamp 3081 T-top II
MO-Clamp 3081 T-Top II – Installs using only the installation tool (#3082) and a torque wrench. Provides a full 10 tons of pulling capacity using 3/8″ Chain. Lies flush with floor when not in use. 3-1/2″ (89mm) cored hole is required.
Capacity: 10 tons (9,072 kg) Replacement Parts: #308110 Casting Cap, #3082 Installation Tool Heat Treated Steel. Made in the U.S.A.
$165.15$224.70Mo-Clamp 3081 T-top II
$165.15$224.70 -
Mo-Clamp 3100 Sheet Metal Hooks – Set
MO-Clamp 3100 Sheet Metal Hooks – Set – Alloy heat-treated hooks increase pulling options. May be used with Hole Pull Plates (#0810 & 0820) to pull, or use in combination with clamps. Includes one of each: #3110, #3120, #3130, #3140.
Capacity: 2 tons (1,814 kg) Replacement Parts: #4051 Eye Nut, #3110 Small Flat Nose Hook, #3120 Small Round Nose Hook, #3130 Large Flat Nose Hook, #3140 Large Round Nose Hook Heat Treated Steel. Made in the U.S.A.
$291.25$436.82Mo-Clamp 3100 Sheet Metal Hooks – Set
$291.25$436.82 -
Mo-Clamp 3110 Small Flat Nose Sheet Metal Hook, Swivel
MO-Clamp 3110 Small Flat Nose Sheet Metal Hook – Single individual small flat nose hook.
$87.05$118.43Mo-Clamp 3110 Small Flat Nose Sheet Metal Hook, Swivel
$87.05$118.43 -
Mo-Clamp 3120 Small Round Nose Sheet Metal Hook, Swivel
MO-Clamp 3120 Small Round Nose Sheet Metal Hook, Swivel – Single individual small round nose hook.
$81.41$110.76Mo-Clamp 3120 Small Round Nose Sheet Metal Hook, Swivel
$81.41$110.76 -
Mo-Clamp 3130 Large Flat Nose Sheet Metal Hook, Swivel
MO-Clamp 3130 Large Flat Nose Sheet Metal Hook, Swivel – Single individual large flat nose hook.
$95.86$130.42Mo-Clamp 3130 Large Flat Nose Sheet Metal Hook, Swivel
$95.86$130.42 -
Mo-Clamp 3140 Large Round Nose Sheet Metal Hook, Swivel
MO-Clamp 3140 Large Round Nose Sheet Metal Hook, Swivel – Single individual large round nose hook.
$91.73$124.80Mo-Clamp 3140 Large Round Nose Sheet Metal Hook, Swivel
$91.73$124.80 -
Mo-Clamp 4010 Frame Rack Uni-Body Clamp
MO-Clamp 4010 Frame Rack Uni-Body Clamp – Bar holes designed for three ways of pulling, using #4044 1/2 ” Shackle and #4043 Oval Loop. Clamp has recessed pockets to hold bolts stationary for easy tightening.
Gripping Surface: 8″ wide (203mm), 3/4″ deep (19mm) Overall Length: 14″(368mm) Capacity: 5 tons(4536kg) Replacement Parts: #4043 Oval Loop, #4044 3/4″ shackle, #4045 Nut, Bolt & Washer, #4046 Spring Heat Treated Steel. Made in the U.S.A.
$517.23$775.75Mo-Clamp 4010 Frame Rack Uni-Body Clamp
$517.23$775.75 -
Mo-Clamp 4015 Frame Rack Jaws with Angle Bracket
MO-Clamp 4015 Frame Rack Jaws with Angle Bracket – Will hold down cars with horizontal pinch welds including Honda 1990 and up. Angles can be drilled to fit frame racks, benches, etc. Includes two #4044 1/2 ” Shackles.
Gripping Surface: 13″ wide (330mm) Overall Length: 6″ (406mm) Capacity: 6 tons (5,443kg) Replacement Parts: #5200 Nut, Bolt and washer, 840076 spring #4016 Frame rail angle bracket (1 only) Heat Treated Steel. Made in the U.S.A.
$1,672.60$2,508.58Mo-Clamp 4015 Frame Rack Jaws with Angle Bracket
$1,672.60$2,508.58 -
Mo-Clamp 4016 Frame Rack Angle Bracket Only
MO-Clamp 4016 Frame Rack Angle Bracket Only – Will hold down cars with horizontal pinch welds including Honda 1990 and up. Angles can be drilled to fit frame racks, benches, etc. Includes two #4044 1/2 ” Shackles.
Does Not Include Jaws.
$486.80$730.11Mo-Clamp 4016 Frame Rack Angle Bracket Only
$486.80$730.11 -
Mo-Clamp 4018 Mercedes Anchoring Adapters
MO-Clamp 4018 Mercedes Anchoring Adapters – For holding vehicles with Mercedes-type jack tube holes. Jack pin adapters provided for early and late models (two different sizes).
Overall Length: 14″ (356 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #5249 Nut, Bolt & Washer, #401805 Small Pin, #401804 Large Pin Heat Treated Steel. Made in the U.S.A.
$1,351.92$2,027.63Mo-Clamp 4018 Mercedes Anchoring Adapters
$1,351.92$2,027.63 -
Mo-Clamp 4020 4-Way Pull Clamp
MO-Clamp 4020 4-Way Pull Clamp – Clamp has recessed pockets to hold bolts stationary for easy tightening. Includes #4043 Oval Loop.
Gripping Surface: 4″ wide (102 mm), 3/4 ” deep (19 mm) Overall Length: 8″ (203 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #4046 Spring, #5355 Nut, Bolt & Washer Heat Treated Steel. Made in the U.S.A.
$319.27$478.84Mo-Clamp 4020 4-Way Pull Clamp
$319.27$478.84
