-
Mo-Clamp 5078 #10 Tool Board
MO-Clamp 5078 #10 Tool Board with Tools Including:
#0200 C Clamp
#0205 Dyna-Mo C Clamp
#0300 JR Clamp
#0305 Dyna-Mo Jr Clamp
#0405 Dyna-Mo W Clamp
#0550 T.O. Clamp
#0660 Long Nose Clamp
#0670 Baby Box Clamp
#0680 Big Mouth Clamp
#1250 Panel Puller
#1300 Sill Hook
#1800 Track Hook (2 Each)
#2400 Adapter Plate
#3110 Small Flat Nose Sheet Metal Hook
#3130 Large Flat Nose Sheet Metal Hook
#4130 Hole Plug (2 Each)
#4145 Double Grab Hook (2 Each)
#5616 Door Post Puller/Twister
#5800 G Clamp
#6311 “T” Hook Tie-Downs (2 Each)
#6302 Slide-Through Sling
#6350 Cable Sling
#6400 Deep Hook Set
#5079 Tool Board with Hooks
105lbs$4,181.03$5,750.09Mo-Clamp 5078 #10 Tool Board
$4,181.03$5,750.09 -
OTC 4044 Ram Runner Two-Stage Hydraulic Pump with 2 Position/2 Way Manual Valve and 6′. Remote Control
OTC 4044 Ram Runner Two-Stage Hydraulic Pump with 2 Position/2 Way Manual Valve and 6 ft. Remote Control -Supplied with one gallon and two quarts of oil. Special order item only, please call customer service.
$4,051.55$4,659.29 -
Lift King bed lift – Main Component Only Lift King
Product Description
Lift King Light Duty Plus Bed Lifting and bed dolly system
The Lift King Light Duty bed lift and storage MAIN UNIT ONLY, bed removal system comes with everything needed for one technician of any size to remove or install OEM pickup boxes of all sizes, including up to 8’ dually boxes. Lift King Main Component quickly converts from the stored position to the working position without needing any tools. Bed box can be removed in as little as five minutes including the original set up time. After removal, the box can easily be moved around the shop and stored as needed. This will also remove beds w/o removing rear bumper. Safely store this in a 3′ X 3′ area
- Main Unit only (This is for shop who already has a complete system)
- 1 Technician required to remove bed
- Improves productivity (multiple technicans not required)
- Works with little or limited cab to bed clearance
- Lift bed to desired height when repairs are required
- Increases productivity when performing fuel pump replacements
- Mitigates and limits risk of damages
- Lowers risk of employee fatigue, strain and injury
- safest and most efficient way to remove or install a pickup box
- Compact design allows storage in a 3′ X 3′ area
- Ships LTL (large truck)
$4,000.00 -
Replacement Chief EZ Liner II pump – 5 Ton Pull Power
Chief EZ Liner II pump – Replacement
This is the replacement EZ Liner II Frame machine 5 Ton hydraulic pump.We have this pump configured to replace the OEM pump and designed to provide for a seamless hook up and implementation.
- Compare to Chief Part # 690515
- Works On Chief Ez Liner II and Classic Frame machine
- Pump is Manufactured by Power Team / SPX
- 10,000 Psi Pump Pressure for 5 Ton Frame Machines
- If you have questions please contact us before placing your order.
- Includes Up & Down Switch
- Oil Does not Ship with these units (use AW46 Hydraulic oil from you local vendor)
- Free Shipping
Please note that this pump will not fit inside the the center Pedestal.
The original pump for this machine is no longer made and there is
no other pump produced at this time that will fit in that space that meets
the specifications necessary to operate the EZ liner II machine.NOTE: This pump will NOT work on LARGE S-21 Frame machines
Please contact us if you have any question.
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original.
NOTE: Original pump is no longer manufactured.
Specifications
- 1/2 HP for single acting Cylinders
- 110/115V – 50/60 HZ
- 10A – 1 Phase
- Max 3450 rpm – with Solenoid
- 2 Gallon Thermoplastic Reservoir or (462in3)
- 18.5 H X 11.375 L X 9.25 W
- Shipping weight 72 lbs
- Max 10,000 psi
- AW-46 Hydraulic Oil
NOTE: Do not use tractor hydraulic oil
$3,535.00$4,772.25Replacement Chief EZ Liner II pump – 5 Ton Pull Power
$3,535.00$4,772.25 -
Replacement Chief Pump Power Team Ten Ton Hydraulic Pump (USED)
- SKU:
- CJ-BHK-PUMP-SL-01
- UPC:
- 3503634122362
- Shipping:
- FREE
$3,500.00 -
Lift Ikotec 3000
PORTABLE AND LIGHTWEIGHT
Our electromechanical ONE-column jack is portable, lightweight and easy to use, making it a really useful tool, either for large or small workshops.
$3,500.00Lift Ikotec 3000
$3,500.00 -
Replacement Chief Frame Machine Tall Anchoring Stands
Replacement Chief Frame Machine Tall Anchoring Stands: Elevate Your Vehicle Repair Capabilities
Upgrade your existing Chief Frame Machine with our cutting-edge Replacement Tall Anchoring Stands, designed to enhance your vehicle repair operations with precision and efficiency. These stands extend the height, providing you with an additional 4 inches, allowing easy access to high-lift vehicles and facilitating seamless repairs.
Key Features:
- Height Extension: Our Replacement Chief Frame Machine Tall Anchoring Stands effectively elevate the height of your existing stands, empowering you to handle high lift vehicles with ease. Say goodbye to accessibility challenges and welcome a new level of versatility to your repair process.
- Superior Compatibility: Engineered as a perfect replacement for Chief part # 702066, our stands are fully compatible with a range of Chief Frame Machine models, including S-21 & S-21M, EZ-Liner II, Classic & EZ 25, Goliath, Impulse, Impulse E-VHT, Stream Liner, Excelerator, Tital, Fuzion, Signature, Freedom, Grabber ProLiner, Maxima, and Chisum.
- Non-OEM Aftermarket Solution: Our Replacement Chief Frame Machine Tall Anchoring Stands are expertly crafted as a non-OEM aftermarket alternative, guaranteeing the same high-quality performance as the original part. This makes it a reliable and cost-effective choice for your repair needs.
- Interchangeable Replacement Parts: Every detail matters in vehicle repair, and our stands feature interchangeable parts that align perfectly with Chief p/n 702066, ensuring seamless integration into your existing setup.
- Free Shipping: To make your experience even more rewarding, we offer free shipping on this product, delivering it straight to your commercial address via LTL (Truck Liner). Please note that residential delivery is not available.
Upgrade Your Repair Capabilities Today!
Experience unmatched precision, reach, and compatibility with our Replacement Chief Frame Machine Tall Anchoring Stands. Take your vehicle repair capabilities to new heights and tackle high lift vehicles with confidence.
Replacement Chief Frame Machine Tall Anchoring Stands, sands extend the height to your existing Stands and will allow you to reach high lift vehicles, these stands will give you 4 additional inches, Compare to Chief part # 702066
- Compare To and Replaces Chief p/n 702066 (set of 4 )
- Works on Chief S-21 & S-21M
- Works on Chief EZ-Liner II, Classic & EZ 25
- Works on Chief Goliath, Impulse, Impulse E-VHT
- Works on Chief Stream Liner, Excelerator
- Works on Chief Tital, Fuzion
- Works on Signature , Freedom
- Works on Grabber ProLiner,
- Works on Maxima and Chisum
- Replacement Parts Interchangeable with Chief p/n 702066
- FREE SHIPPING
$3,420.00$4,617.00Replacement Chief Frame Machine Tall Anchoring Stands
$3,420.00$4,617.00 -
Zinko ZRDH-606 60ton 6″ Stroke Double Acting Hollow Plunger Cylinder
Zinko ZRDH-606 60 Ton 6″ Stroke Double Acting Hollow Plunger Cylinder- Design for use in a variety of applications where lifing, pushing, bending or holding may be required.
Double acting design for greater speed and positive control. Interfaces with automated operations. 3/8″ fast flow couplers included on all models. Threaded collar along with hollow plunger design allows for both pull and push forces. Baked enamel finish for increased corrosion control. Removable hardened saddles protect plunger during lifting and pressing. Built in safety valve prevents accidental over-pressurization. Plunger wiper seals reduce contamination, extending cylinder life.Country of Origin: Taiwan
$3,169.69$3,622.50Zinko ZRDH-606 60ton 6″ Stroke Double Acting Hollow Plunger Cylinder
$3,169.69$3,622.50 -
DentFix DF-EZN1 EZ Nitrogen Plastic Welder – Bottle
DentFix DF-EZN1 EZ Nitrogen Plastic Welder – The DF-EZN1 EZ NITRO PLASTIC WELDER is unique in its use of proprietary Flow Adjust Switch Technology (FAST). The FAST system makes the DF-EZN1 the easiest nitrogen welder to learn and use. It simplifies nitrogen welding and eliminates flow adjustments by the user. This significantly reduces the time to set up the welder and gets the work done FAST.
Equipped with two welders, the DF-EZN1 EZ NITRO incorporates both a nitrogen welding torch and an airless welding torch. The nitrogen torch is air cooled. It is essential to establish and maintain air flow before turning the welder on, and air flow must be maintained until the nitrogen torch cools down. (Usually 10 minutes to cool down after powering down)
The unit comes with plastic rod in various types and sizes to enable the user to weld different types of plastic and different types of damages. Also included is a roll of aluminum tape to hold parts together when welding. The hand seaming tool help shapes, flatten, and insure that repaired flanges and tabs are the correct thickness.
The cart is equipped with a tank regulator, tank brackets, tank chain, a heat gun holster, and a power strip for powering other tools.
$2,979.32$3,385.59DentFix DF-EZN1 EZ Nitrogen Plastic Welder – Bottle
$2,979.32$3,385.59 -
Zinko ZJJ-5013 50ton 5″ Stroke Journal Mechanical Jack
50 Ton 5.11″ Stroke Journal Mechcanical Jack- Beveled gear construction combines the precision forging pinion to provide shifted tooth form, strong and excellent interlocking.
Special Features:
Unique construction bearing is made for longer life and smooth horizontal advance.
Rigidly designed screw made by chrome -molybdenum steel to withstand excessive load.
Beveled ring gear interlocks with the precision forged pinion to provide shifted tooth form for strong and excellent interlocking.
Special ratchet handle interior design with nickel-chrome wheel and plunger enables strong rotation for an easy , smooth operation.
Buttress threads will not creep down under load.
Operable vertically or laterally (lateral movement requires optional traversing bed).Country of Origin: Japan
More Information
Capacity (Tons) :50
Stroke (in) :5.11
Operation Force (Ft. / lb.) :1035
Minimum Height (in) :11.42
Maximum Heights (in) :16.53
Saddle Diameter (in) :4.13
Base Diameter (in) :6.50
Weight (lbs) :90.000000Minimum Height :11.375 inches.
$2,960.20$3,389.09Zinko ZJJ-5013 50ton 5″ Stroke Journal Mechanical Jack
$2,960.20$3,389.09 -
Zinko ZRH-606 60ton 6″ Stroke Single Acting Cylinder Hollow Plunger
Zinko ZRH-606 60 Ton 6″ Stroke Single Acting Cylinder Hollow Plunger- Design for use in a variety of applications where lifting, pushing, bending or holding may be required.
High-strength alloy steel construction. Chrome-plated piston rods resist wear and corrosion. Special bearing design helps prevent galling for long life and trouble-free performance. Polyurethane seals and wipers to reduce contamination, extending cylinder life. Hardened saddles keep top bearing and plunger from jamming. Saddle grooves help prevent slipping. Heavy-duty spring enables consistent fast plunger retraction. All models come with fast-flow quick-connection coupler and dust cap. May be used in any position. Hollow plunger design allows for both pull and push forces.
Country of Origin: Taiwan
Min Ht. 12.75″$2,761.19$3,155.64Zinko ZRH-606 60ton 6″ Stroke Single Acting Cylinder Hollow Plunger
$2,761.19$3,155.64 -
The MAXI EX – 110V Dent Fix
DESCRIPTION:
One of the Most Common Steel Panel Repair Areas is the Dog-Leg or Door Repair. The MAXI EX configuration brings the technician eye level with the damage. The ergonomic position saves the tech from bending over or kneeling and prevents unnecessary daily stress on their body.Just WELD • PULL • TWIST! The Dent Fix Equipment MAXI DF-505EX110 is a 110 volt single phase steel dent pulling station that provides the technician with the power they need to shrink, pull rocker panels, hail damage, creases, dents in hard to access areas and all types of metal damage.
The efficiency of this tool increases the workers productivity while producing a cleaner, better repair. Taking the idea of a stud welder one step further, this versatile tool will:
1. Weld pins & keys
2. Weld a slide hammer directly to the panel
3. Weld a light pulling rod
4. Weld wiggle wire for even crease pulling
5. Weld a rod for leverage pulling
6. Shrink metalINCLUDES: EX Edition includes the MAXI 110V (DF-505/110V: Leverage Puller, Rods, Claws, Electrodes, and Consumables), 2 Accessories Shelves (DF-505AT), Padded Seat (DF-505MS), and an Extended Handle (DF-505PHXT, replaces standard handle that comes with t
$2,395.00The MAXI EX – 110V Dent Fix
$2,395.00
