- “Zinko ZR-154 15ton 4" Stroke Ram” already exists in your wishlist
-
Replacement Spring Shackle Assembly – For Chief Fast Anchoring
Replacement Spring Shackle assembly for chief fast frame anchoring system, this works well with the original equipment and requires no modifications. Compare this to the chief original part # 539423
- Compare to and replaces chief part# 539423
- Works On Chief FAST anchoring Package
- Price is for 1 Each
- 100% Guarantee satisfaction
- FREE SHIPPING
This is a Non-OEM, Replacement Part That Replaces Original
Comes with 100 % Satisfaction Guaranteed$337.50$455.63 -
Replacement Switch Cord for Up & Down Control Pendant for Chief S21M
Replacement Chief S21M Switch Cord for up & Down Control pendant
Compare to Chief Part # IT601204
- New in Box 30′ Cable For Yellow Control Pendant 2 button W/ Emergency Stop
- 14 Gauge Numbered Wire 1 thru 4 with Ground
- Does Not Include Up & Down Switch
- Replacement for S21M & Impulse Frame Machines
- Cord is for chief switch p/n IT601204CA
- Sold as Wire Cable only “Switch Not Included “
- FREE SHIPPING
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
IT601204, IT601209, Rp-6002, RP-6002-SW, RP-6002-SWc
$192.50$259.88 -
Replacement Tower Lock Pin – For Chief EZ-liner II Frame Machine
Replacement Tower Lock Pin – For Chief EZ-liner II Frame Machine
- Replaces and compares to Chief p/n# 680501
- Works on Chief EZ Liner II, Classic & EZ 25
- Price Is for Qty. of 1
- 3/4″ Round Pin
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
$52.73$71.18 -
Replacement Tower Lock Pin – For Chief S21 Frame Machine
Replacement Tower Lock Pin – For Chief S21 & S21M Frame Machines, Compare to and Replaces Chief p/n 618708
- Works on Chief S-21, S-21M, Titan, & Standard Frame machines
- Works on Signature Frame machines
- Works on Chisum Signature & Signature GT frame machines
- Price Is for Qty. of 1
- 1″ Round pin
- For Front Towers only.
- Measure your Old Pin and Compare.
- NOTE: DOES NOT work on EZ Liner II or EZ 25 frame machine
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
$59.20$79.92 -
Retaining Ring – For 5″ Collar Roller Pin
Retaining Ring – For 5″ Collar Roller Pin
Retaining Ring is for chief Tower roller pin
- Works with Chief Roller pin for S21 & S21M, Goliath,
- Roller pin works with Signature & Signature Hybrid Frame Machine
- Replaces and compares to Chief Part# 680747
- Pin Is Grooved on both ends and has a 1.240 Diameter
- ( Wheel Sold separately)
- ( Pin Sold separately)
$3.80$5.13Retaining Ring – For 5″ Collar Roller Pin
$3.80$5.13 -
Roller Tower, 1-Il4″ X 3/8″ Hole Chief Tower – Kit
Roller Tower, 1-Il4″ X 3/8″ Hole Chief Tower – Kit
- Replaces Chief Part # 450146
- Bearing 1-Il4″ X 3/8″ Hole
- Comes With Shoulder Bolt 450283
- 450283 Bolt 3/8″X1.25′,5/1 6″-1 8
- 100% Satisfaction Guarantee
$93.00$125.55Roller Tower, 1-Il4″ X 3/8″ Hole Chief Tower – Kit
$93.00$125.55 -
Scraper Set – PDR Hot Glue and Decal Removal tools
Scraper Set – This multifunctional tool is great for hot glue tab and decal removal, Scraper set is manufactured and molded of a Durable hard molded plastic. 2 Piece kit has many many uses in the Collision repair field.
Includes 2 scrapers
Manufactured of Durable Hard Molded Plastic
Compact and molded for comfort
Removes PDR – Hot Glue Tabs
Removes decals and other adhesive applied items
Works very well in many collision repair applications
This tool is truly multi functional
This tool is manufactured for professionals by Professionals$39.90$44.55Scraper Set – PDR Hot Glue and Decal Removal tools
$39.90$44.55 -
Serrated Jaws – Grip Screws for Chief Frame Machine Clamps
Button head screws for Chief Frame Machine Serrated Jaw – Grips
These are the screws that hold the serrated jaw grips to the anchoring stands. Screws are used with the Generation 4 Style clamps only.
- Screws are For the serrated jaws
- For use with generation 4 Style Clamps
- Box of 25
- Screws only (Serrated Jaw Sold Separately)
$23.92 -
Signature Frame Machine Lift Ram 10″ Stroke, 10 Ton Ram
Replacement signature Frame Machine Lift Ram 10 Ton Ram, this is a 10″ Stroke cylinder with 10,000 psi working pressure, and is a plug and play replacement, and no modifications are required. This ram will work with signature frame machine with single and dual rams (uses same ram) and includes threaded ram coupler and hydraulic coupler.
- Works with Signature frame machine w/dual lift rams
- Works with Signature frame machine w/single lift rams
- Works with Signature Hybrids frame machine w/dual lift rams
- 10 Ton ram lift capability (per cylinder)
- 10,000 psi working pressure
- Includes hydraulic coupler (is not used on some models)
- Includes top threaded coupler
- Comes with threaded ram end
- Plug & Play no modifications needed
- 100% satisfaction guaranty
- FREE SHIPPING
$585.06$672.82Signature Frame Machine Lift Ram 10″ Stroke, 10 Ton Ram
$585.06$672.82 -
Snap Ring Retainer – For Power Team Rams
Snap Ring Retainer 16076
Works with Power Team Hydralic Rams; C101C, C102C, C104C, C106C, C108C, C1010C, C1012C, C1014C,C1016C,1U-7529, 1U-7530, 1U7531, 20581-AS, 201581-C4, 201581-C6, 2R1010S, 2R101S, R102S, 2R104S, 2R106S, 2R108S, 36762, 4103, 4104, 4104-CMI, 4105, 4105-CAR, 420006, 420362, 420622, 42445, 43143, 5P-9725, B9200-69, BP496, YS-105 Series #D, YS-106, YA106 Series #D, YS-107, YS107
Non OEM Replacement
$4.88$5.61Snap Ring Retainer – For Power Team Rams
$4.88$5.61 -
Soft-Shock Mallet By Dentfix
Product Details
The Soft-Shock Mallet, DF-SM76, will apply a strong striking force AND avoid damaging or scratching parts! Non-Marring too!APPLICATION
Utilize for automotive materials susceptible to marring, cracking and pinching. Also works great on aluminum body panels, bumper covers, and trim.
FEATURE & BENEFITSRUBBER HOUSING – Special contact housing designed to reduce damage to delicate surfaces.
SOFT SHOCK – Non-Newtonian fluid filler is engineered to compress and dissipate the force.
STEEL SHAFT – Angled 15˚ to protect against accidental contact.
NON-SLIP GRIP – Ideal gripping position and feel to insure safety and control.
DESCRIPTION
Discover all the new ways Soft-Shock Mallet DF-SM76 can be utilized on many collision repair jobs. The special non-Newtonian filler can compress and dissipate force, designed to reduce damage to the repair surface area. Apply firm precision taps for “parts fitment negotiating” dashboards, head- or tail-light assemblies, windshield placement, plastic bumper covers, interior or exterior decorative trim, emblems, and GPR/PDR work. With the same mallet in hand, release heavy-handed controlled hits for steel or aluminum body panels, roof rails, alloy wheels, and center caps. Its your new favorite mallet!What is Non-Newtonian Fluid?
In non-Newtonian fluids, viscosity can change when under force to either more liquid or more solid. You may have come across it and didn’t know it. Do you remember in childhood mixing corn starch and water? The mixture is called “oobleck” or “magic mud”and is a perfect example of non-Newtonian fluid. When it was punched or hit it became impenetrable but a soft touch easily breaks the surface.SPECIFICATIONS
Head Height: 2 13/32 in
Head Width: 3 3/64 in
Head Weight: 13 oz
Total Weight: 1.48 lb
Total Length: 10¼ in$132.00$139.00Soft-Shock Mallet By Dentfix
$132.00$139.00 -
SPR Die Set – TESLA 15pc for Dent Fix 10T Self-Piercing Riveter
Product Details
15 Piece TESLA Die Set, part no. DF-SPR/TESLA15. Rivet Dies for application & removal of Self-Piercing Rivets & Flow Form Rivets also includes Punching, Leveling, and an Extension for use with larger arms.Includes:
Two (2) Forming Die heads for 5mm SPRs (S7 and S8)
One (1) SPR Rivet Holder (B1)
5mm SPR Extraction Set (E2 & E3)
One (1) Flow Form Glue Evacuation Head (F4)
Two (2) Flow Form Head of Rivet Dies (F3 & F5)
8mm Flow Form Extraction Die Set (E10 & E9)
8mm Punching Die Set (T3 & T4)
Two (2) Leveling Dies (D17)
One (1) Extension Piece for use with HR3 Arm
Wrench & Extra O-Rings
Case Included
Fits the DF-SPR70 10T Self-Piercing Riveter ONLY (Sold Separately).$778.04$795.40
