-
Mo-Clamp 7001 Universal Tram Gauge with Cardboard Box
MO-Clamp 7001 Universal Tram Gauge with Cardboard Box – Tram Instruments are a versatile and indispensable tool for determining collision damage to uni-body cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mechanical components. The Tram Instrument makes it easy to establish dimensions around components and to check contours by comparing measurements from one side of the vehicle to the other. Measures from 2-1/2″ (65mm) to 11′ (3.3m). Level bubble installed in sliding head for accuracy in measurement. Made in the U.S.A.
$1,144.19$1,716.07Mo-Clamp 7001 Universal Tram Gauge with Cardboard Box
$1,144.19$1,716.07 -
Dentfix DF-3DX Digi-Tram Digital Measuring Tram Gauge
DentFix DF-3DX Digi Tram Digital Measuring Tram Gauge – Taking point-to-point measurements from 1’4″ to 11’11” feet (400-3640 mm) the tram user can measure in feet, inches, 1/16”s of an inch and metric measurements with the touch of a button. The zeroing function enables you to take comparison measurements, displaying the appropriate positive or negative reading. Placing the center pointer on the prescribed 400mm mark, measurements shorter than the collapsed length of the tram can be made. Offering our widest measuring range, the “DIGI-TRAM” comes with (3) 350 mm long pointers, (2) 110 mm short pointers, (2) bullet pointers, (2) pointer holders, and (2) cones for zeroing out larger holes all stored in a plastic carrying case. One year manufacturer’s warranty.
$1,147.53$1,530.04Dentfix DF-3DX Digi-Tram Digital Measuring Tram Gauge
$1,147.53$1,530.04 -
Zinko ZRH-302 30ton 2.5″ Stroke Hollow Ram
Zinko ZRH-302 30 Ton 2.5″ Stroke Hollow Ram- Design for use in a variety of applications where lifting, pushing, bending or holding may be required.
High-strength alloy steel construction. Chrome-plated piston rods resist wear and corrosion. Special bearing design helps prevent galling for long life and trouble-free performance. Polyurethane seals and wipers to reduce contamination, extending cylinder life. Hardened saddles keep top bearing and plunger from jamming. Saddle grooves help prevent slipping. Heavy-duty spring enables consistent fast plunger retraction. All models come with fast-flow quick-connection coupler and dust cap. May be used in any position. Hollow plunger design allows for both pull and push forces.
Country of Origin: Taiwan
Min Ht. 7.03″$1,157.19$1,322.50Zinko ZRH-302 30ton 2.5″ Stroke Hollow Ram
$1,157.19$1,322.50 -
Mo-Clamp 7000 Universal Tram Gauge with Storage Case
MO-Clamp 7000 Universal Tram Gauge with Storage Case – Tram Instruments are a versatile and indispensable tool for determining collision damage to uni-body cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mechanical components. The Tram Instrument makes it easy to establish dimensions around components and to check contours by comparing measurements from one side of the vehicle to the other. Measures from 2-1/2″ (65mm) to 11′ (3.3m). Level bubble installed in sliding head for accuracy in measurement. Includes hard plastic storage case. Made in the U.S.A.
$1,160.83$1,741.03Mo-Clamp 7000 Universal Tram Gauge with Storage Case
$1,160.83$1,741.03 -
DentFix CureRIGHT UV Curing Gun
The CureRIGHT DF-CR004 rechargeable UV Curing Gun utilizes the latest ultra high flux UV-A LED technology and is focused through custom designed optics to provide a more efficient, faster, and safer cure light. Use for all automotive repair and industrial curing needs utilizing ultraviolet light curable fillers, base coats, primers, top coats, and clear coatings. Up to 1 second curing time for some UV primers. Powerful irradiance with maximum UV-A intensity of 55,000 μW/cm² at 8 inches (20cm). Successfully tested on UV paint products from all major paint manufacturers. Only emits UV-A, and does not emit UV-B or UV-C. Efficient active built-in cooling system keeps the light cooler to maintain optimum light output during extended use. Efficient ultrasonic range finder function. Wall-Mounted charging station provides more convenient recharging process.
APPLICATION
Use for all automotive repair and industrial curing needs utilizing ultraviolet light curable fillers, base coats, primers, top coats, and clear coatings.FEATURE & BENEFITS
• FAST CURING TIMES – Up to 1 second curing time for some UV primers.
• POWERFUL IRRADIANCE – maximum UV-A intensity of 55,000 μW/cm² at 8 inches (20cm).
• ACTIVE COOLING SYSTEM- Keeps the light cooler to maintain optimum light output during extended use.
• ULTRA RANGE FINDER – Efficient ultrasonic range finder and timer functions.
• LCD CONTROL CENTER – Easily set curing times and irradiance.SPECIFICATIONS:
Light Source: High Power UV LED
LED Light Wattage: 66 Watts
LED Lifetime: 40,000 Hours
LED Wavelength: λp= 395 ±5 nm
Battery Type: Li-ion 11.1V – 5200mAh, 57.72Wh
Battery Charging Time: 3 Hours
Battery Charging Info: AC 100 – 240V ~ 15V 1.5A
Running Time: 90 Minutes in Total (Max 10 minutes each use)
Weight: 2 Lbs (0.9 Kg)
Dimensions: 6-1/4”x 8-3/4“x 3” (159 x 223 x 77mm)
Housing Material: Aluminum + Polyamide
Cooling System: Thermal Management System enhanced with fan
Storage Temperature: -4°F ~ 122°F (-20° C ~ +50° C)TECHNICAL SPECIFICATIONS:
Ultrasonic Range Finder: Max 160” (400cm)
Temperature Control Function: Working ≤ 194° F (90° C)
Safety Protection Function: Double click ≤ 100ms
Curing Distance: 2” (50mm) to 8” (200mm)
Curing Zone Dimensions: 4” x 4” (100mm x 100mm) to 8” x 8” (200mm x 200mm )
Curing Time: 5~12 seconds* to 30~80 seconds*
Average Irradiance: 135 mW/cm2 to 36 mW/cm2
Peak Irradiance: 200 mW/cm2 to 55 mW/cm2$1,163.93$1,473.33DentFix CureRIGHT UV Curing Gun
$1,163.93$1,473.33 -
Zinko ZRH-204 20ton 4″ Stroke Hollow Ram
Zinko ZRH-204 20 Ton 4″ Stroke Hollow Ram- Design for use in a variety of applications where lifing, pushing, bending or holding may be required.
High-strength alloy steel construction. Chrome-plated piston rods resist wear and corrosion. Special bearing design helps prevent galling for long life and trouble-free performance. Polyurethane seals and wipers to reduce contamination, extending cylinder life. Hardened saddles keep top bearing and plunger from jamming. Saddle grooves help prevent slipping. Heavy-duty spring enables consistent fast plunger retraction. All models come with fast-flow quick-connection coupler and dust cap. May be used in any position. Hollow plunger design allows for both pull and push forces.Country of Origin: Taiwan
$1,166.84$1,333.53Zinko ZRH-204 20ton 4″ Stroke Hollow Ram
$1,166.84$1,333.53 -
Zinko ZRM-075 75ton 0.63″ Stroke Super Low Cylinder
ZRM Series Single-Acting Low Height Cylinders. These low height cylinders have a flat and compact design for use where other cylinders will not fit. Designed for use where other cylinders will not fit. All models are designed for use in any position and feature base mounting holes for easy attachment to almost any fixture.
Special Features:
Light weight and rugged.
Built for power & mobility.
Designed for use in all positions.
Come with a 3/8″ NPT fast flow coupler.
Mounting holes allow easy mounting on to almost any fixture.
Grooved plunger ends do not require saddle.
Capacity (Tons) :75
Stroke (in) :0.63
Oil Capacity (in³) :10.00
Cylinder Effective Area (in²) :15.90
Minimum Height (in) :3.11
Maximum Heights (in) :3.74
Outside Diameter (in) :6.50 x 5.50
Weight (lbs) :27.000000$1,194.50$1,365.14Zinko ZRM-075 75ton 0.63″ Stroke Super Low Cylinder
$1,194.50$1,365.14 -
Static Gun – DF-EZAP – By Dent Fix
Dent Fix DF-EZAP StaticZap – anti-static device that keeps the surface clean during the paint process to avoid unnecessary reworking and buffing, saving both time and money.
Static attracts dust and unwanted particles, making it very difficult to keep surfaces clean and causing blemishes in the paints finish and other work surfaces. Its absolutely essential to eliminate static from the environmentat every stage of paintingin order to avoid costly reworking.
The StaticZap incorporates the efficiency and power of an air amplifier with the proven technology of corona ionization to produce a highly effective anti-static blow-off gun. Perform the anti-static blow off before starting and at every stage in the painting process to eliminate fisheyes and produce a finish that looks like glass.
The two-minute anti-static process will eliminate the need for wet sanding and buffing which saves time on prep work and also cuts down on labor and materials.
The Kit includes a lightweight, durable gun, rechargeable lithium ion battery, two emitter pins, and safety keys.
$1,196.25$1,595.00Static Gun – DF-EZAP – By Dent Fix
$1,196.25$1,595.00 -
Mo-Clamp 5090 #9 Tool Board with Hooks
MO-Clamp 5090 #9 Tool Board – Keep your tools organized and in good condition with handy tool boards.
The package includes: #5091 Tool Board with Hooks #0045 Angle Bite Clamp #0054 Mini Spring Clamp #0205 Dyna-Mo C Clamp #0305 Dyna-Mo Jr Clamp #0405 Dyna-Mo W Clamp #2450 Boltless Strut Tower Puller #4058 MAC II Multi-Angle Clamp #5616 Door Post Puller/Twister #5091 Toolboard Dimensions: 2’x2′ Tools are Heat Treated Steel and Made in the U.S.A.
$1,256.12$1,883.95Mo-Clamp 5090 #9 Tool Board with Hooks
$1,256.12$1,883.95 -
Zinko ZRH-206 20ton 6″ Stroke Hollow Ram
Zinko ZRH-206 20 Ton 6″ Stroke Hollow Ram- Design for use in a variety of applications where lifting, pushing, bending or holding may be required.
High-strength alloy steel construction. Chrome-plated piston rods resist wear and corrosion. Special bearing design helps prevent galling for long life and trouble-free performance. Polyurethane seals and wipers to reduce contamination, extending cylinder life. Hardened saddles keep top bearing and plunger from jamming. Saddle grooves help prevent slipping. Heavy-duty spring enables consistent fast plunger retraction. All models come with fast-flow quick-connection coupler and dust cap. May be used in any position. Hollow plunger design allows for both pull and push forces.
Country of Origin: TaiwanMin Ht. 12.05″
$1,263.29$1,443.75Zinko ZRH-206 20ton 6″ Stroke Hollow Ram
$1,263.29$1,443.75 -
Zinko ZR-504A 50ton 4.25″ Stroke Aluminum Single Acting Cylinder
Zinko Aluminum Cylinder is easily carried around and connected to work with any 10,000 psi air over hydraulic pump. These lightweight and rugged cylinders are suitable for almost every heavy lifting situation, in the shop or on the job site.
Special Features:
All models come with 3/8″ NPT fast-flow quick-connection couplers and dust caps.
Made of the strongest aluminum alloys and heat-treated to provide a maximum combination of strength and fracture resistance.
Grooved saddles for stability.
Steel base-plated for increased durability.
Optional valve to control cylinder speed can also be used as shut off valve for temporary load holding.
Optional aluminum base provides extra support and stability for the 50 ton cylinders.More Information
Capacity (Tons) :50
Stroke (in) :4.25
Oil Capacity (in³) :43
Minimum Height (in) :9.29
Maximum Heights (in) :13.22
Outside Diameter (in) :5.11
Cylinder Bore Diameter (in) :3.74
Plunger Diameter (in) :3.15
Base to Adv. Port (in) :1.18
Saddle Diameter (in) :1.96
Weight (lbs) :29.000000$1,271.37$1,452.99Zinko ZR-504A 50ton 4.25″ Stroke Aluminum Single Acting Cylinder
$1,271.37$1,452.99 -
Replacement Chief Style Frame Anchoring Stands – Generation 3 – Single
Replacement Chief Style Frame Anchoring Stand – Generation 3 – Single: Unleash Precision in Frame Repairs
Enhance your frame repair operations with our high-performance Replacement Chief Style Frame Anchoring Stand – Generation 3 – Single, a perfect match for Chief 3rd Generation clamps 702083. Comparable in every way, this stand offers exceptional gripping power and precision, ensuring seamless compatibility with a wide array of frame machines, including S-21, S-21M, EZ liner, Classic, Impulse, Goliath, Titan, and more.
Key Features:
- Superior Performance: Our Replacement Chief Style Frame Anchoring Stand – Generation 3 – Single is engineered to meet the rigorous demands of modern frame repairs. Experience enhanced gripping capabilities and secure holding for a seamless repair process.
- Versatile Compatibility: Designed to work seamlessly with various Chief Frame Machine models, including S-21 & S-21M, EZ-Liner II, Classic & EZ 25, Goliath, Impulse, Impulse E-VHT, Stream Liner, Excelerator, Chisum, Freedom, Signature, and Proline Frame systems. Enjoy a versatile solution that fits effortlessly into your setup.
- Precise Engineering: Our Replacement Chief Style Frame Anchoring Stand – Generation 3 – Single ensures consistent performance and reliable gripping, allowing for precise and efficient frame repairs.
- Comprehensive Single Package: This single anchoring stand assembly includes a new bolts kit, one 5 1/4 inch Metric bolt, and one Metric fastener bar, streamlining the installation process for seamless compatibility with your frame machine.
- Non-OEM Aftermarket Excellence: As a non-OEM aftermarket replacement part, our stand stands tall as a reliable and cost-effective alternative to the original Chief 3rd Generation clamps 702083, assuring you of consistent performance and long-lasting durability.
- Convenient Free Shipping: We take care of your convenience by offering free shipping on this product, ensuring it arrives promptly and securely at your desired location.
Unleash Precision in Frame Repairs!
Upgrade your frame repair toolkit with our Replacement Chief Style Frame Anchoring Stand – Generation 3 – Single and unlock unparalleled performance and gripping power. Designed for compatibility and precision, this stand is your key to achieving flawless frame repairs.
Embrace the excellence of our Replacement Chief Style Frame Anchoring Stand – Generation 3 – Single and elevate your frame repair capabilities today!
- Single Anchoring stand assembly
- Compare To and Replaces Chief p/n 702083
- Works on Chief S-21 & S-21M
- Works on Chief EZ-Liner II, Classic & EZ 25
- Works on Chief Goliath, Impulse, Impulse E-VHT
- Works on Chief Stream Liner, Excelerator
- Works on Chisum, Freedom, Signature, Proline Frame system
- Includes New Bolts Kit
- Includes (1) 5 1/4 inch Metric Bolts
- Includes (1) Metric Fastener Bars
- Powder Coat Finish
- Includes Free Shipping
- Shipping Weight 90 lbs
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
$1,300.00$1,755.00Replacement Chief Style Frame Anchoring Stands – Generation 3 – Single
$1,300.00$1,755.00
