-
Mo-Clamp 5090 #9 Tool Board with Hooks
MO-Clamp 5090 #9 Tool Board – Keep your tools organized and in good condition with handy tool boards.
The package includes: #5091 Tool Board with Hooks #0045 Angle Bite Clamp #0054 Mini Spring Clamp #0205 Dyna-Mo C Clamp #0305 Dyna-Mo Jr Clamp #0405 Dyna-Mo W Clamp #2450 Boltless Strut Tower Puller #4058 MAC II Multi-Angle Clamp #5616 Door Post Puller/Twister #5091 Toolboard Dimensions: 2’x2′ Tools are Heat Treated Steel and Made in the U.S.A.
$1,256.12$1,883.95Mo-Clamp 5090 #9 Tool Board with Hooks
$1,256.12$1,883.95 -
Mo-Clamp 5830 Saddle Mate
MO-Clamp 5830 Saddle Mate – For use with your Selsun Air Jack. Unique formed shape gives the Saddle Mate superior strength. Custom die form to fit 99-percent of all automobiles.
Overall Length: 10″ (255mm) Heat Treated Steel. Made in the U.S.A
$65.69$89.38Mo-Clamp 5830 Saddle Mate
$65.69$89.38 -
Mo-Clamp 6308 30″ Sling with Snap Rings
MO-Clamp 6308 30″ Sling with Snap Rings – Use as a safeguard against separation, breakage of temporary welds or clamp failure. Not meant for pulling. Use for restraint of chain and clamps only.
Overall Length: 30″ (762mm) Width: 1″ (25mm) Heat Treated Steel. Made in the U.S.A.
$93.11$126.68Mo-Clamp 6308 30″ Sling with Snap Rings
$93.11$126.68 -
Mo-Clamp 0800 Tac-N-Pull with Pull Plates
MO-Clamp 0800 Tac-N-Pull with Pull Plates – For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch. Includes two 3″ plates, two 1 1/4″ plates, and two 1″ plates.
Gripping Surface: Up to 3″ wide (76 mm) Overall Length: 5-1/2″ (140 mm) Capacity: 3 tons (2,722 kg)
Replacement Parts: #0801 1″ Pull Plate, #0802 1-1/2″ Pull Plate, #0803 3″ Pull Plate or #0805 Tac-N-Pull Plate Kit (includes ten 1″ plates, five 1-1/2″ plates, and five 3″ plates) Heat Treated Steel. Made in the U.S.A.
$175.88$204.02Mo-Clamp 0800 Tac-N-Pull with Pull Plates
$175.88$204.02 -
Mo-Clamp 1255 Large Panel Puller
MO-Clamp 1255 Large Panel Puller – A perfect companion to the smaller 1250, the large panel puller allows the technician to increase the length of contact when pulling a panel into shape. Made of Mo-Clamp Tru-tuff steel alloy, this tool will last a lifetime and is covered by the Mo-Clamp “Forever” warranty. Use it in any situation where you need to get behind a pull. Made in USA.
Capacity: 3 tons (2,722kg) Length: 9″ (22.86cm) Pulling Surface: 4.75″ (12.06cm)
$144.23$211.33Mo-Clamp 1255 Large Panel Puller
$144.23$211.33 -
Mo-Clamp 0307 Dyna-Mo Corner Clamp
MO-Clamp 0307 Dyna-Mo Corner Clamp – With 3 tons of capacity, the Corner Clamp conforms to the exacting standards of all Mo-Clamp products. Made from Mo-Clamp Tru-Tuff heat-treated steel alloy, the 90-degree Corner Clamp uses a drop forged wedge for added strength. Eliminates the need to use two separate clamps and will be able to get into narrow and confined areas.
$166.08$243.34Mo-Clamp 0307 Dyna-Mo Corner Clamp
$166.08$243.34 -
Mo-Clamp 4040 5/8″ X 3-1/2″ GR8 Bolt, Nut, Washer, Spring
MO-Clamp 4040 5/8″ X 3-1/2″ GR8 Bolt, Nut, Washer, Spring
$24.48$31.08 -
Mo-Clamp 0801 Pull Plate for Tac-N-Pull 1″
MO-Clamp 0801 Pull Plate for Tac-N-Pull 1″
$7.86$9.98Mo-Clamp 0801 Pull Plate for Tac-N-Pull 1″
$7.86$9.98 -
Mo-Clamp 7200 Deluxe Centerline Gauge
MO-Clamp 7200 Deluxe Centerline Gauge (w/o Board)
- Measures automatic centerline for all vehicles
- For use with foreign and domestic
- Exceptional reliability and accuracy
- Recessed tapes for efficient reading and durability
- Made of rugged, light-weight cast aluminum
- Measures in metric units.
- Instruction manual included
- Compatible with all data books.
- Includes (4) #710161 8″ (203mm) Vertical Scales
- Includes (2) #710163 16″ (406mm) Vertical Scales
- Includes (2) #710164 24″ (610mm) Vertical Scale
Note: Some Vehicles may require optional Vertical Scales (That are not included with this kit)
- Optional #710162 12″ (305mm) Vertical Scale – Sold Separately
- Optional #710165 30″ (762mm) Vertical Scale- Sold Separately
Replacement Parts: #710161 8″ (203mm) Vertical Scale, #710163 16″ (406mm) Vertical Scale, #710164 24″ (610mm) Vertical Scale, #710129 Board Only, #710131 Hook Set Only Heat Treated Steel. Made in the U.S.A.
$1,955.52$2,932.91Mo-Clamp 7200 Deluxe Centerline Gauge
$1,955.52$2,932.91 -
Mo-Clamp 4052 Triangle for Double Looper
MO-Clamp 4052 Triangle for Double Looper
Working Load Limit: 3,600 lbs.
$69.78$88.61Mo-Clamp 4052 Triangle for Double Looper
$69.78$88.61 -
Mo-Clamp 4028 BMW Hold Down
MO-Clamp 4028 BMW Hold Down – For holding BMW vehicles with oblong or round jack tube holes.
Overall Length: 14″ (356 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #5249 Nut, Bolt & Washer, #402801 Rocker Pin Heat Treated Steel. Made in the U.S.A.
$1,515.76$2,273.36Mo-Clamp 4028 BMW Hold Down
$1,515.76$2,273.36 -
Mo-Clamp 4153 Hole Plug and Clevis Hook
MO-Clamp 4153 Hole Plug and Clevis Hook – Versatile combination for quick hook-ups and multiple pulls. 18-inches of 3/8″ chain included.
Overall Length: 25-1/4″ (654 mm) Working Load Limit: 6,600 lbs Working Load Limit: Refers to the maximum load (rated capability) in pounds that shall be applied in direct tension to a straight length of chain or attachment. NEVER EXCEED THE WORKING LOAD LIMIT of chains or attachments, even when the item is new and the load limit is uniformly applied. Replacement Parts: #5220 Clevis Pin & Rue Clip Heat Treated Steel. Made in the U.S.A.
$120.36$176.35Mo-Clamp 4153 Hole Plug and Clevis Hook
$120.36$176.35
