- “Zinko ZAJ-1008 10ton 3" Stroke Journal Mechanical Aluminum Jack” already exists in your wishlist
-
Booster Pac HT1224AGM Commercial Jump Starter/Charger
Booster PAC HT1224AGM Commercial Jump Starter/Charger -Truck Ship Only. HazMat.
The “Big Boy” of wheeled jump starting units has gotten an upgrade: features installed AGM batteries to increase unit longevity and eliminate spill hazards
Specifically designed for over-the-road transportation and heavy-duty implements starting applications
It exceeds the challenges of frigid weather and delivers the instant raw power of 1400 cold cranking amps in 12 Volt mode and 800 cold cranking amps in 24 Volt mode
Features 10 ft. cable leads made of 1/0 cable to reaching the starting points on vehicles of all shapes and sizes
Automatic 7 Amp x 2 Channel Battery Charging System
Ships with (2) Group 31 AGM Batteries Installed
1 Year Limited Warranty$2,551.42$2,934.14Booster Pac HT1224AGM Commercial Jump Starter/Charger
$2,551.42$2,934.14 -
DentFix 613RH 1/4″ Finger Ratchet
DentFix 613RH 1/4″ Finger Ratchet- This is the optional ratchet head for use with the Multi-handle system. This accessory pushes the DF- 615 and DF-613 kits into a whole new realm. Be sure to get one when ordering your kits.
$32.26$40.83DentFix 613RH 1/4″ Finger Ratchet
$32.26$40.83 -
Dentfix DF-601A Surge Protector
DentFix DF-601A Surge Protector – Acting like a sponge to soak up electrical surges, this unit protects sensitive electronic components when mig and spot welding on a vehicle. An Absolute must when jump starting. No need to disconnect the battery for protection. An LED indicates that the device is working and correctly connected. Lifetime warranty.
$57.97$74.80Dentfix DF-601A Surge Protector
$57.97$74.80 -
Dentfix DF-900IT Infrared Thermometer with Target Laser
Dentfix DF-900IT Infrared Thermometer with Target Laser
$134.94$179.92Dentfix DF-900IT Infrared Thermometer with Target Laser
$134.94$179.92 -
DentFix LP22 Short Nose Locking Pliers
DentFix LP22 Short Nose Locking Pliers
$48.34$62.38DentFix LP22 Short Nose Locking Pliers
$48.34$62.38 -
DentFix LP23 Long Nose Locking Pliers
DentFix LP23 Long Nose Locking Pliers
$48.34$62.38DentFix LP23 Long Nose Locking Pliers
$48.34$62.38 -
DentFix LP24 Swivel Nose Locking Pliers
DentFix LP24 Swivel Nose Locking Pliers
$48.34$62.30DentFix LP24 Swivel Nose Locking Pliers
$48.34$62.30 -
DentFix MatchRIGHT MatchHEAD 3 Color Matching Head Lamp
UPC: 811662033400
The MatchRight DF-MR003 MatchHEAD 3 Color LED Head Lamp is a super bright rechargeable head mounted flood lamp. Mounting it on the user’s head, the lamp illuminates whatever area the user is facing but it also frees up their hands to concentrate on performing the task at hand. Motion Sensor Mode allows the user to simply wave their hand in front of the lamp to turn on and off the LED light. An impact and moisture resistant body protects the unit against falls and spills. An adjustable elastic headband with comfortable grips helps keep the lamp in place all day long. The included USB charger is able to charge the unit in 3 hours. On a full charge the MatchHEAD will last for 3 hours.
FEATURES:
Hands Free Operation: Super bright 160 Lumens LED is worn on the users head to light up the area where the user is looking with no need to for an extra helper to hold a lamp or struggling to find a mounting location.
3 Light Colors – 2700K | 4500K | 6500K
Motion Sensor Mode – No need to stumble to find the switch, simply waive your hand in front of the light to turn the lamp on and off.
60° Adjustable Bracket – Easily point the lamp downwards to illuminate the work area below.
SPECIFICATIONS:
Light Source: High CRI 3 Color COB LED
Luminous Power: 160 Lumen
CRI: 96+
CCT: 2700K | 4500K | 6500K
Operating Time: 3 Hours
Battery: Li-Po 3.7V, 1500 mAh, 5.55Wh
Charging Time: 3 Hours
Charging Input: DC 5V 1A
Degree of Protection: IP 65, IK 07
Operating Temp: 15° F to 105° F
Warranty: 1 YearAPPLICATIONS:
Color matching, polishing, detailing, and general shop use.$88.71$112.29DentFix MatchRIGHT MatchHEAD 3 Color Matching Head Lamp
$88.71$112.29 -
DentFix MatchWAND 3 Color Match Wand
The DF-MR005 MatchRight MatchWAND 3 Color LED Wand Lamp is a super bright rechargeable flood lamp that fits in the palm of your hand. The high CRI lamp is the perfect light solution for producing the perfect lighting conditions while paint color matching and detailing. Easily mount the lamp with 3 mounting options: magnet on the back, magnet on the base, or a top mounted hanger that unfolds and folds into the back of the unit. A 180 degree adjustable handle helps point the lamp at the right angle when mounted to a vertical surface. The replaceable lens easily unscrews when it is time to change for routine maintenance. The battery indicator lets you know when it is time to charge and how much of a charge is left in the battery. An impact and moisture resistant body protects the unit against falls and spills. The included USB charger and wall mountable base unit is able to charge the unit in 4 hours. On a full charge the MatchWAND will last for approximately 2.5 hours in Full Power Mode (approx. 4 hours in ECO Mode).
FEATURES & BENEFITS
• 3 LIGHT COLOR – Wide CCT range from, 2700 to 6500K, to visualize truer color.
• REPLACEABLE LENS – Easily change for routine maintenance.
• MAGNET & HOOK MOUNTS – Magnets at the base and back of the unit. A hide-a-way hook is located at the top.
• 180° ADJUSTABLE HANDLE – Point the lamp at the right angle when mounted to a vertical surface.Specifications (Full Mode):
Light Source: High CRI 3 Color COB LED
Luminous Power (Full): 500 Lumen
CRI: 96+
CCT: 2700K | 4500K | 6500K
Operating Time (Full): 2.5 Hours
Battery: Li-Ion 3.7V, 2600 mAh, 9.62Wh
Charging Time: 4 Hours
Charging Input: DC 5V 1A
Degree of Protection: IP 65, IK 07
Operating Temp: 15° F to 105° F
Warranty: 1 Year
Specifications (Eco Mode):
Luminous Power (Eco): 250 Lumen
Operating Time (Eco): 4 Hours$142.47$180.34DentFix MatchWAND 3 Color Match Wand
$142.47$180.34 -
DentFix TS100 Torque Screw Driver and 28 Bits
DentFix TS100 Torque Screw Driver and 28 Bits- Torque: 2 to 34 lbs/in. Guaranteed Accuracy within 6% (in clockwise direction).
Includes 5/64. 3/32, 7/64, 1/8 and 9/64 inch hex bits (5 pcs). No. 1 and 2 Posidrive Bits (2 pcs) Flathead bits 1-2, 3-4, 5-6, 8-10, 12-14 (5 pcs) Phillips bits No. 0, 1, 2, and 3 (4 pcs) Torx bits T-10, T-15, T-20, T-25, T-30 and T-40 Includes square recess bits No 0, 1, 2, and 3 (4 pcs) Bit Holder (1 pc) Socket Adapter (1 pc)$114.12$152.16DentFix TS100 Torque Screw Driver and 28 Bits
$114.12$152.16 -
Flex-O-Light LED Light
The light can also be mounted in three other different ways: clamp, stick, or hang. The 2” clamp is located inside the handle and can be extended and contracted by rotating the yellow ring on the body. The end of the body contains two strong magnets, for ferrous mounting locations, and a collapsible hook that can unfolded to hang from hoods and the undercarriage.
$28.20Flex-O-Light LED Light
$28.20 -
Hedson IRT 3-2 PCD 800458 Curing Lamp
- SKU:
- IRT-3-2PcD
- UPC:
- 687927265561
- Availability:
- Usually Ships in 2 to 3 Weeks
Cure area – 79″ x 55″ Minimum Distance from Panel – 600mm (24″) Power Rating – 3 kW each cassette Electrical specifications – 220 Volts, 60Hz, Single Phase, 26A
$5,895.00$6,167.70Hedson IRT 3-2 PCD 800458 Curing Lamp
$5,895.00$6,167.70
