Designed for transmission removal, transport, and installation in passenger cars, vans, and light trucks that are lifted by an in-ground or above-ground lift.
Special Features:

Two stage cylinder that provides a low pick-up point with high lifting capability.
Universal saddle and corner brackets that are fully adjustable with a safety constraint belt to secure your load.
Foot operated two-stage hydraulics allow for precise load control as well as rapid lifting abilities.
Safety bypass system that prevents damage to the cylinder.
Equipped with two release pedals, one for fast lowering without a load and the other provides slow lowering with a load.
Ram, pump, and piston are specially finished to prevent oil leakage.
Four-wheel base with locking swivel urethane casters to ensure stability and effortless positioning.
More Information
Capacity (Tons) :0.5
Minimum Height (in) :39.88
Maximum Heights (in) :68.89
Power Lift (in) :29.01
Chassis Length (in) :33.26
Chassis Width (in) :33.26
Saddle Cradle (degree) :30° / 15°
Side Title (degree) :15°
Weight (lbs) :193.000000

These heavy-duty service jacks are compact and designed for use on a wide range of automobiles. From sedans to light trucks and vans, the ZSJ Series is the professional’s choice for quick, efficient chassis lifting.

Special Features:

Overall construction from selected steel frame, full swivel rear caster wheels.
Extra long chassis reaches under low overhangs.
Ductile steel saddle for better grip and vehicle frame protection.
Overload safety valve
More Information
Capacity (Tons) :5
Minimum Height (in) :5.90
Hydraulic Lift (in) :16.14
Maximum Heights (in) :22.04
Chassis Length (in) :55.70
Chassis Width (in) :14.37
Height of Frame (in) :7.87
Weight (lbs) :241.000000

Mini Jack – 5 ton capacity, Min. Ht. 3.34″. Small size is ideal for centering heavy equipment or making fine adjustments. Compact, and powerful with a very low profile.

Special Features:

Compact, and powerful with a very low profile
Small size is ideal for centering heavy equipment or making fine adjustments
Can be used in conjunction with a mechanical gear puller to create a hydraulic puller with over 5 ton capacity
Can also be used as a spreader to apply force with just over 2-1/2″ of clearance needed
Use in either an upright or horizontal position

Country of Origin: Japan
More Information
Capacity (Tons) :5
Minimum Height (in) :3.34
Maximum Heights (in) :4.92
Ram Lift (in) :1.57
Saddle Diameter (in) Ø :1.10
Base Area (in) :3.70 x 3.50
Weight (lbs) :6.000000

Min Ht. :3 -3/8

Air Hydraulic Bottle Jack – 12 ton, cast iron base. Turn ordinary manual bottle jack power into air-hydraulic power. When connected to your shop’s air lines, these versatile jacks can safely deliver lifting power with the push of a button, for lifting of heavy cars, trucks and other applications.

Special Features:

Operates both manually and pneumatically
Fast and efficient air pump saves lifting time; built-in safety valve to prevent overload
Heat treated extension screw and release valve adds extra strength and life span
Extremely strong and well designed swivel head bolt with 360° movement to prevent hose binding
Spring coil protectors on both ends to prevent punctures
Rust preventive coating on ram and extension screw
Convenient push button flap type air operation valve
Durable ductile iron base with 3 piece zinc plated handle
Properly placed welded carrying handle for easy transport
More Information
Capacity (Tons) :12
Lift Time by Air Supply – No Load :40
Lift Time by Air Supply – Load :125
Air Pressure Range (psi) :40-140
Minimum Height (in) :9.69
Ram Lift (in) :5.88
Screw Extension (in) :3.13
Maximum Heights (in) :18.69
Weight (lbs) :29.000000

Overview

Easy to operate push-button floor jack with an air pump. Ideal for use in tight spaces including on trucks, automotive and agricultural equipment.
Special Features:

The jack can be operated either manually or pneumatically.
Overall construction of selected steel frame, full swivel rear caster wheels and large lifting saddle provide easy positioning and enable these jacks to safely lift to their rated capacities.
Quick lift foot pump can easily lift the jack saddle to the loading point.
Pneumatic operation requires air pressure ranges from 90 to 140 psi operated by a push button for quick lift.
Push button control unit can be easily removed from the handle enabling operator to view the load from various angles.
Large release knob provides metered release control.
Extra long low chassis reaches under low overhangs for easy load positioning.

Country of Origin: Japan
More Information
Capacity (Tons) :10
Minimum Height (in) :6.30
Hydraulic Lift (in) :15.75
Maximum Heights (in) :22.05
Chassis Length (in) :60.82
Chassis Width (in) :19.48
Height of Frame (in) :9.84
Operating (psi) :116-145
Weight (lbs) :325.000000
Min Ht. 6-1/4″ Max Ht. 22″

12 Ton 28″ Screw Type Jack Stand. Designed to assist in stabilizing vehicles on a lift and supporting vehicle components under the vehicle.

Special Features:

Minor adjustments can be made without any lift required.
Formed steel welded base and frame for extra strength.
Easy operation type column adjusts to fit any height position.
Extension screw locking device for extra safety and support.
Large support saddles and handle for easy adjustments.
Sold individually. Pricing is for one stand
More Information
Capacity (Tons) :12
Minimum Height (in) :27.95
Maximum Heights (in) :41.92
Saddle Diameter (in) :6.63 x 3.50
Base Area (in) Ø :26.37
Weight (lbs) :57.000000