-
Zinko Zml-500 1/2ton Transmission Jack
Designed for transmission removal, transport, and installation in passenger cars, vans, and light trucks that are lifted by an in-ground or above-ground lift.
Special Features:Two stage cylinder that provides a low pick-up point with high lifting capability.
Universal saddle and corner brackets that are fully adjustable with a safety constraint belt to secure your load.
Foot operated two-stage hydraulics allow for precise load control as well as rapid lifting abilities.
Safety bypass system that prevents damage to the cylinder.
Equipped with two release pedals, one for fast lowering without a load and the other provides slow lowering with a load.
Ram, pump, and piston are specially finished to prevent oil leakage.
Four-wheel base with locking swivel urethane casters to ensure stability and effortless positioning.
More Information
Capacity (Tons) :0.5
Minimum Height (in) :39.88
Maximum Heights (in) :68.89
Power Lift (in) :29.01
Chassis Length (in) :33.26
Chassis Width (in) :33.26
Saddle Cradle (degree) :30° / 15°
Side Title (degree) :15°
Weight (lbs) :193.000000$1,365.41$1,560.47Zinko Zml-500 1/2ton Transmission Jack
$1,365.41$1,560.47 -
Zinko ZSJ-50H 5ton Heavy Duty Service Jack
These heavy-duty service jacks are compact and designed for use on a wide range of automobiles. From sedans to light trucks and vans, the ZSJ Series is the professional’s choice for quick, efficient chassis lifting.
Special Features:
Overall construction from selected steel frame, full swivel rear caster wheels.
Extra long chassis reaches under low overhangs.
Ductile steel saddle for better grip and vehicle frame protection.
Overload safety valve
More Information
Capacity (Tons) :5
Minimum Height (in) :5.90
Hydraulic Lift (in) :16.14
Maximum Heights (in) :22.04
Chassis Length (in) :55.70
Chassis Width (in) :14.37
Height of Frame (in) :7.87
Weight (lbs) :241.000000$1,400.70$1,600.80Zinko ZSJ-50H 5ton Heavy Duty Service Jack
$1,400.70$1,600.80 -
Zinko ZRM-100 100ton 0.63″ Stroke Super Low Cylinder
ZRM Series Single-Acting Low Height Cylinders. These low height cylinders have a flat and compact design for use where other cylinders will not fit. Designed for use where other cylinders will not fit. All models are designed for use in any position and feature base mounting holes for easy attachment to almost any fixture.
Special Features:
Light weight and rugged.
Built for power & mobility.
Designed for use in all positions.
Come with a 3/8″ NPT fast flow coupler.
Mounting holes allow easy mounting on to almost any fixture.
Grooved plunger ends do not require saddle.Country of Origin: Taiwan
More Information
Capacity (Tons) :100
Stroke (in) :0.63
Oil Capacity (in³) :12.39
Cylinder Effective Area (in²) :19.63
Minimum Height (in) :3.34
Maximum Heights (in) :3.97
Outside Diameter (in) :7.00 x 6.00
Weight (lbs) :34.000000$1,546.14$1,767.01Zinko ZRM-100 100ton 0.63″ Stroke Super Low Cylinder
$1,546.14$1,767.01 -
Zinko ZAml-502 1/2ton Air Hydraulic High Lift Transmission Jack
1/2 ton air hydraulic high lift transmission jack with 2 stage. Designed for transmission removal or installation of passenger cars, vans and light trucks that are raised by an in ground or above ground lift.
Special Features:
Dual Performance – Can be used manually or by air actuated operation.
Safety bypass and overload system prevents jack from being used beyond its rated capacity.
Foot operated release valve frees operator’s hands to guide the load.
Special 2-stage design enables work from lower pickup point with higher reach capacity.
Fully adjustable universal saddle with adjustable corner brackets and safety chain.
Equipped with handle, easy to move in all directions.
Swivel caster wheels are for easy moving and positioning.
Chromed telescopic rams and the strong leg design provides maximum stability.
Adjustable head available at additional charge, please email or call for more information.More Information
Capacity (Tons) 0.5
Minimum Height (in) 33.25
Maximum Heights (in) 71
Power Lift (in) 37.75
Chassis Length (in) 31 x 37
Chassis Width (in) —
Saddle Cradle (degree) 30°
Side Title (degree) 15°
Weight (lbs) 180.000000$1,600.20$1,828.80Zinko ZAml-502 1/2ton Air Hydraulic High Lift Transmission Jack
$1,600.20$1,828.80 -
Zinko ZAJ-1008 10ton 3″ Stroke Journal Mechanical Aluminum Jack
10 Ton Aluminum Mechanical Journal Jack, 3 inch stoke. Beveled ring gear interlocks with the precision forged pinion to provide shifted tooth actuation. Extremely strong, precise interlocking gears. Used in structural steel work, bridges, shop building and other industry where powerful, all position jacks are required. Ideal for applications where electric power or air power is inconvenient or dangerous.
Special Features:
Unique construction bearing is made for longer life and smooth horizontal advance.
Rigidly designed screw made by chrome -molybdenum steel to withstand excessive load.
Beveled ring gear interlocks with the precision forged pinion to provide shifted tooth form for strong and excellent interlocking.
Special ratchet handle interior design with nickel-chrome wheel and plunger enables strong rotation for an easy , smooth operation.
Buttress threads will not creep down under load.
Operable vertically or laterally (lateral movement requires optional traversing bed).
Constructed of aluminum alloy, reducing overall weight.Country of Origin: Japan
More Information
Capacity (Tons) :10
Stroke (in) :3.15
Operation Force (Ft. / lb.) :185
Minimum Height (in) :6.88
Maximum Heights (in) :10.03
Saddle Diameter (in) :2.28
Base Diameter (in) :4.01
Weight (lbs) :18.000000Minimum Height 6 15/16 inches
$1,611.76$1,842.01Zinko ZAJ-1008 10ton 3″ Stroke Journal Mechanical Aluminum Jack
$1,611.76$1,842.01 -
Zinko ZJJ-2513 25ton 5″ Stroke Journal Mechanical Jack
Zinko ZJJ-2513 25 Ton 5″ Stroke Journal Mechcanical Jack- Beveled gear construction combines the precision forging pinion to provide shifted tooth form for strong interlocking.
Unique construction bearing makes for longer life and smooth horizontal advance. Rigidly designed screw made by Chrome-molybdenum steel to withstand excessive load. Special ratchet handle interior design with nickel-chrome made wheel and plunger enables to obtain strong rotation, easy and smooth operation.
Country of Origin: Japan$1,742.64$1,991.59Zinko ZJJ-2513 25ton 5″ Stroke Journal Mechanical Jack
$1,742.64$1,991.59 -
Zinko ZMJ-50Y 50ton Mini Jack
Zinko ZMJ-50Y 50 Ton Mini Jack- A Compact, powerful jack with a very low profile. Small size jack is ideal for centering heavy equipment or making fine adjustments.
Can be used in conjunction with a mechanical gear puller to create a hydraulic puller with over 5 ton capacity. Can also be used as a spreader to apply force with just over 2-1/2″ of clearance needed. Use in upright, and horizontal position. Country of Origin: JapanMin Ht. 4-5/8″, Max Ht. 6-3/4′
$1,767.94$2,020.50Zinko ZMJ-50Y 50ton Mini Jack
$1,767.94$2,020.50 -
Zinko ZSJ-100H 10ton Heavy Duty Service Jack
These heavy-duty service jacks are compact and designed for use on a wide range of automobiles. From sedans to light trucks and vans, the ZSJ Series is the professional’s choice for quick, efficient chassis lifting.
The lift can be operated manually. Overall construction of selected steel frame, full swivel rear caster wheels, and large lifting cap provide easy positioning and enable this jack to handle the largest loads. With a foot pumping device, you can raise the jack saddle up to the loading point hand free. T-Handle permits easier maneuvering. It can be locked in one of three positions so that is is convenient to position the jack under the load. Large knob provides load release control. Built-in automatic safety valve prevents overloading and also protects the ram plunger from being pushed up beyond the upper limit.
Special Features:
Overall construction from selected steel frame, full swivel rear caster wheels.
Extra long chassis reaches under low overhangs.
Ductile steel saddle for better grip and vehicle frame protection.
Overload safety valve.
More Information
Capacity (Tons) :10
Minimum Height (in) :6.30
Hydraulic Lift (in) :15.75
Maximum Heights (in) :22.05
Chassis Length (in) :60.83
Chassis Width (in) :19.50
Height of Frame (in) :9.84
Weight (lbs) :350.000000$1,808.26$2,066.59Zinko ZSJ-100H 10ton Heavy Duty Service Jack
$1,808.26$2,066.59 -
Zinko ZAJ-2510 25ton 4″ Stroke Journal Mechanical Aluminum Jack
Overview
25 Ton Aluminum Mechanical Journal Jack, 4 inch stoke. Beveled ring gear interlocks with the precision forged pinion to provide shifted tooth actuation. Extremely strong, precise interlocking gears. Used in structural steel work, bridges, shop building and other industry where powerful, all position jacks are required. Ideal for applications where electric power or air power is inconvenient or dangerous.
Special Features:
Unique construction bearing is made for longer life and smooth horizontal advance.
Rigidly designed screw made by chrome -molybdenum steel to withstand excessive load.
Beveled ring gear interlocks with the precision forged pinion to provide shifted tooth form for strong and excellent interlocking.
Special ratchet handle interior design with nickel-chrome wheel and plunger enables strong rotation for an easy , smooth operation.
Buttress threads will not creep down under load.
Operable vertically or laterally (lateral movement requires optional traversing bed).
Constructed of aluminum alloy, reducing overall weight
More Information
Capacity (Tons) :25
Stroke (in) :3.93
Operation Force (Ft. / lb.) :520
Minimum Height (in) :7.87
Maximum Heights (in) :11.80
Saddle Diameter (in) :2.28
Base Diameter (in) :4.80
Weight (lbs) :29.000000Minimum Height 7 7/8 inches.
$1,951.15$2,229.88Zinko ZAJ-2510 25ton 4″ Stroke Journal Mechanical Aluminum Jack
$1,951.15$2,229.88 -
Zinko ZASJ-30M 3ton Air Hydraulic Service Jack
Zinko ZASJ-30M 3 Ton Air Hydraulic Service Jack- Easy to operate with push button floor jack with an air pump. Designed for use on trucks, automotive and agricultural equipment. Extra long chassis reaches under low overhangs.
The lift can be operated manually and pneumatically. Overall construction of selected steel frame, full swivel rear caster wheels, and large lifting cap provide easy positioning and enable this jack to handle the largest loads. Air hydraulic pump with air pressure ranges from 90 to 140 psi can be operated by the puch button device for a quick lift. Push button control unit can be easily removed from handle for remote operation. With a foot pumpng device, you can raise the jack saddle up to the loading point hand free. T-Handle permits easier maeuvering. It can be locked in one of three positions so that is is convenient to position the jack under the load. Large knob provides load release conrol. Built-in automatic safety valve prevents overloading and also protects the ram plunger from being pushed up beyond the upper limit.
Country of Origin: Japan$1,960.00$2,240.00Zinko ZASJ-30M 3ton Air Hydraulic Service Jack
$1,960.00$2,240.00 -
Zinko ZM-1500T 1.5ton Floor Type Transmission Jack Low Profile
Zinko ZM-1500T 1.5 Ton Floor Type Transmission Jack Low Profile- Designed specially for large-sized vehicles. Cylinder and attachement are oil-leak proof and light weight for ease of movement and service.
High efficiency of pump and plunger giving fast and smooth lifting of transmission in a simple operation by minimum labor. Saddle adjustable for forward and backward, or side tilt and sidewise movement. Valve for the hydraulic unit is independent enabling simple interchange after a long use.
Country of Origin: Taiwan$1,985.00$2,268.57Zinko ZM-1500T 1.5ton Floor Type Transmission Jack Low Profile
$1,985.00$2,268.57 -
Zinko ZATJ-250 25ton Air Hydraulic Truck Jack
Zinko ZATJ-250 25 Ton Air Hydraulic Truck Jack- All steel welded construction heavy duty units made for use on trucks, buses and agricultural machinery.
Units are lightweight yet are built for heavy duty use. All ZATJ series are fast, smooth, and efficient due to their all-steel wedge construction. Includes a flow control valve to prevent the ram from sudden falls. Quick lift mechanism allows a shortened ram lifting time without load. Specially processed air pump for low-noise operation. 2 large rubber-tire wheels and 3 position locking T-handle make this jack easy to fit into any space. Country of Origin: Japan$2,165.63$2,475.00Zinko ZATJ-250 25ton Air Hydraulic Truck Jack
$2,165.63$2,475.00
