Dentfix DF-DB79K Dead Blow Hammer Kit with 6 Tips – a unique Dead Blow Hammer that can adapts to the technicians paint less dent repair (PDR) tool needs with interchangeable tips. The dual head gives the user two striking ends to knock down high spots on dent repairs. Depending on the situation the steel metal tip can be used for bare steel panels.

Kit includes 6 different interchangeable screw on tips:
• Aluminum Round
• Steel Round
• Rubber Round
• Plastic Flat
• Brass Round
• Brass Flat

When working with aluminum panels use the aluminum tip to prevent contamination. The rubber or plastic tips can be used for a softer touch when performing paint less dent repair on painted aluminum or steel panels (do not cross contaminate). Both brass tips are non-sparking. Also includes blow-molded storage case.

Blowback is eliminated thanks to the dual flex neck that cushions each strike. Flip the tool over and the chiseled end is perfectly suited for prying off door trim panels or removing glue residue and glue attached PDR pulling tabs. The tool is seven inches in overall length.

DentFix DF-1780T 8 mm HSCo Spot Weld Drill Bit Titanium Coated – Specifically designed for the rigors of spot weld drilling, these Germany made bits can be used with any 3/8-inch drill. Centering nib prevents bit from walking. Sold individually.

DentFix DF-508TK Half Pound Thick Wiggle Wire .093 – approximately 15 pieces

DentFix 1667 6.7mm Tungsten Carbide STC for Usibor- 6.7mm x 80mm drill bit by Dent Fix Equipment is made of tungsten carbide and is designed to penetrate ultra high strength metal panels of Boron and Usibor steel. These metals are usually used in structurally significant areas such as intrusion beams, rocker rails or A- and B-door-pillars. The triple fluted bit is designed to spread torque over a greater surface area and a specialized coating is applied to the bit for friction-free usage. This bit is specifically useful on Mercedes Benz rockers to create holes for riveting on the CL Class.

The DF-505AT is an Accessory Tray that is a great way to increase the amount of working surface area for your MAXI or EZ Nitro! It mounts securely to the crown of the unit and holds firmly in place to provide more storage area, right by your side. Position consumables and optional equipment (sold separately) on the top of the unit for easy access when working. Each tray adds 50 square inches of work space.

Purchase two Accessory Trays to maximize the amount of work space for your MAXI (Please note they are sold as individual pieces and not as a set).

it is an optional accessory that fits the The MAXI (DF-505/220V & DF-505/110V, sold separately) and EZ Nitro Generator (DF-EZN1G, sold separately Please note it only fits on one side of the unit because the hoses block proper fitment on the other side).