-
Mo-Clamp 4050 Multi-Angle Clamp
MO-Clamp 4050 Multi-Angle Clamp – The versatile Multi-Angle Clamp permits pulling from any direction within a 180-degree arc. The multi-angle side pull plate makes two-way pulling faster and easier. Hardened gator teeth firmly grip narrow seams and pinch welds. Clamp has “bolt stoppers” to hold bolts stationary, for easy tightening.
Gripping Surface: 3-1/2″ wide (95 mm), 1/2 ” deep (19 mm) Overall Length: 7″ (178 mm) Capacity: 4 tons (3,629 kg) Replacement Parts: #5325 Nut, Bolt & Washer, #200131 Side Pull Bracket Heat Treated Steel. Made in the U.S.A.
$243.64$365.42Mo-Clamp 4050 Multi-Angle Clamp
$243.64$365.42 -
Mo-Clamp 4044 1/2″ Screw Pin Shackle
MO-Clamp 4044 1/2″ Screw Pin Shackle
$32.44$41.19Mo-Clamp 4044 1/2″ Screw Pin Shackle
$32.44$41.19 -
Mo-Clamp 4151 Grab Hook and Single Claw
MO-Clamp 4151 Grab Hook and Single Claw – Versatile combination for quick hook-ups and multiple pulls. 18-inches of 3/8″ chain included.
Overall Length: 24″ (610 mm) Working Load Limit: 6,600 lbs Working Load Limit: Refers to the maximum load (rated capability) in pounds that shall be applied in direct tension to a straight length of chain or attachment. NEVER EXCEED THE WORKING LOAD LIMIT of chains or attachments, even when the item is new and the load limit is uniformly applied.
$108.18$158.50Mo-Clamp 4151 Grab Hook and Single Claw
$108.18$158.50 -
Mo-Clamp 6307 60″ Sling with Snap Rings
MO-Clamp 6307 60″ Sling with Snap Rings – Use as a safeguard against separation, breakage of temporary welds or clamp failure. Not meant for pulling. Use for restraint of chain and clamps only.
Overall Length: 60″ (1,524mm) Width: 1″ (25mm) Heat Treated Steel. Made in the U.S.A.
$96.67$131.52Mo-Clamp 6307 60″ Sling with Snap Rings
$96.67$131.52 -
Mo-Clamp 7001 Universal Tram Gauge with Cardboard Box
MO-Clamp 7001 Universal Tram Gauge with Cardboard Box – Tram Instruments are a versatile and indispensable tool for determining collision damage to uni-body cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mechanical components. The Tram Instrument makes it easy to establish dimensions around components and to check contours by comparing measurements from one side of the vehicle to the other. Measures from 2-1/2″ (65mm) to 11′ (3.3m). Level bubble installed in sliding head for accuracy in measurement. Made in the U.S.A.
$1,144.19$1,716.07Mo-Clamp 7001 Universal Tram Gauge with Cardboard Box
$1,144.19$1,716.07 -
Mo-Clamp 0452 Flash Clamp 7ton
MO-Clamp 0452 Flash Clamp 7 Ton – Spring-loaded operation makes each clamp easy to use. Mo-Grip surface and pivoting head allows for a secure grip on most surfaces. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws can be easily replaced.
Capacity: 7 tons (6,350 kg) Length: 8″ (203 mm) Width: 3½” (89 mm) Replacement Parts: #045203 Pivot Jaw, #010706 Wedge, #520029 Pivot Pins, #520033 Retaining Bolt, #840076 Spring Heat Treated Steel. Made in the U.S.A.
$335.80$503.64Mo-Clamp 0452 Flash Clamp 7ton
$335.80$503.64 -
Mo-Clamp 3081 T-top II
MO-Clamp 3081 T-Top II – Installs using only the installation tool (#3082) and a torque wrench. Provides a full 10 tons of pulling capacity using 3/8″ Chain. Lies flush with floor when not in use. 3-1/2″ (89mm) cored hole is required.
Capacity: 10 tons (9,072 kg) Replacement Parts: #308110 Casting Cap, #3082 Installation Tool Heat Treated Steel. Made in the U.S.A.
$165.15$224.70Mo-Clamp 3081 T-top II
$165.15$224.70 -
Mo-Clamp 5811 Snap Block
MO-Clamp 5811 Snap Block – Double your pulling power. Use this adapter with #5810 Down Pulley Assembly to make a Snap Block Pulley.
Overall Length: 8-1/2″ (210mm) Capacity: 5 tons (4,536kg) Replacement Parts: #6210 Hook Only, #520503 Bolt Assembly Heat Treated Steel. Made in the U.S.A.
$94.37$128.40Mo-Clamp 5811 Snap Block
$94.37$128.40 -
Mo-Clamp 0200 C Clamp
MO-Clamp 0200 C Clamp – Self-Tightening. Its 11/2″ (39 mm) throat clearance fits over a flange or frame horn, or around a lip to pull from behind. Original wedge. Original straight cut tooth design.
$177.56$260.16Mo-Clamp 0200 C Clamp
$177.56$260.16 -
Mo-Clamp 6311 Ford “T” Hook with 3/8″ X 12″ Chain
MO-Clamp 6311 Ford “T” Hook with 3/8″ X 12″ Chain – Original shipping tie down for Ford vehicles. Excellent around the frame machine to help hold a frame while diamond is being pulled.
Overall Length 6″ (228mm) Capacity 4 tons (3,629kg)
$58.97$74.88Mo-Clamp 6311 Ford “T” Hook with 3/8″ X 12″ Chain
$58.97$74.88 -
Mo-Clamp 5010 #1 Tool Board
MO-Clamp 5010 #1 Tool Board with Tools Including:
- #0100 B Clamp
- #0200 C Clamp
- #0300 JR Clamp
- #0400 W Clamp
- 2- #1200 Twin Pull
- #1300 Sill Hook
- #1800 Track Hook
- #5011 Tool Board with Hooks
#5011 Toolboard Dimensions: 2’x2′ Tools are Heat Treated Steel and Made in the U.S.A
$1,418.79$2,127.92Mo-Clamp 5010 #1 Tool Board
$1,418.79$2,127.92 -
Mo-Clamp 3051 T-top Anchor Pot (1 Only)
MO-Clamp 3051 T-Top Anchor Pot – An anchoring system for versatile pulling. Insert 3/8″ frame straightening chain, anchor with lock cap, and pull from any direction or angle. Lock cap keeps out dirt and dust when not in use. Includes sleeve and lock cap. 3-1/2″ (89mm) cored hole required. 3060 Cast-in Model is available for new floors.
Capacity: 10 tons (9,072 kg) Replacement Parts: #300210 Welded Cap Heat Treated Steel. Made in the U.S.A.
$148.28$201.74Mo-Clamp 3051 T-top Anchor Pot (1 Only)
$148.28$201.74
