-
Dentfix DF-CGS72 Cold Adhesive Glue Pads Kit
DentFix Cold Adhesive Glue Pad Set with Mammoth Tar DF-CGS72 is a lightweight kit that is a great way for auto body professionals to quickly and safely move large areas of metal efficiently when paired with a slide hammer (not included with this kit).
The kit includes 50 grams of Mammoth Tar Cold Glue that provides almost instantaneous, strong adhesion. Also included in the kit is 4 uniquely shaped tabs and a 4pc Universal PDR Sliding Hammer Adapter Set to adapt this system to a wide variety of slide hammers. Each tab is aluminum for strength and durability. Tab sizes include: 38mm & 52mm Round Tabs and 22mm x 57mm & 36mm x 80mm Rectangular Tabs.
The composition of cold glue is durable (with proper use) and can be kept without special storage conditions
Performs without the need for specialized dispensing tools or glue guns
Durable adhesive is reusable up to 1-year and can be washed with soap and water to remove soil or contaminants
The application area of Cold Glue adhesive is very wide, but this product does not solve all the problems that a body repair expert will face.The level of adhesion is different than hot glue. For example if there is complex damage like a sharp crease, Cold Glue will need the assistance of other pulling methods for an optimal repair.
$183.77$245.03Dentfix DF-CGS72 Cold Adhesive Glue Pads Kit
$183.77$245.03 -
Dentfix DF-CT887 Slim-Line Plastic Riveter Kit
DentFix DF-CT887 Slim-Line Plastic Riveter Kit – This compact plastic rivet plier is perfect for tight places. Use on vehicles where plastic rivet clearance is minimal. Plier is 1 inch tall and requires 2 inches clearance to fully pull rivets. No pumping needed. Saves time and disassembly effort! Specifically designed for plastic rivets. Designed and patented in the U.S.A. Includes plastic case and rivets.
$97.82$130.43Dentfix DF-CT887 Slim-Line Plastic Riveter Kit
$97.82$130.43 -
Dentfix DF-CT887RL 6.3mm 1/4″ Plastic Pop Rivet 50 Pcs.
DentFix DF-CT887RL 6.3MM 1/4″ Plastic Pop Rivet 50 Pieces
$19.39$24.54 -
Dentfix DF-CT887RS 5.0mm 7/32″ Plastic Pop Rivet 50 Pcs.
DentFix DF-CT887RS 5.0mm 7/32″ Plastic Pop Rivet 50 Pieces
$17.53$22.19 -
Dentfix DF-CT888 Swivel Slim-Line Plastic Riveter Kit
Dentfix DF-CT888 Swivel Slim-Line Plastic Riveter – compact plastic rivet pliers is perfect for tight and hard to reach places. Use on vehicles where plastic rivet clearance is minimal or obstructed.
Plier requires about 2 inches of clearance to fully pull rivets.
No pumping needed. Saves time and dis-assembly effort!
Specifically designed for plastic rivets.
Kit includes riveter, 10 short plastic rivets, 10 long plastic rivets, and blow molded case.
Plastic rivets are also available separately.
Prop 65Dimensions 2 x 11.5 x 7.75 in
$101.23$134.97Dentfix DF-CT888 Swivel Slim-Line Plastic Riveter Kit
$101.23$134.97 -
Dentfix DF-DB69 Dead Blow Hammer
DentFix DB69 – A unique Dead Blow Hammer that is three paint less dent repair (PDR) tools in one.
The dual head gives the user two striking ends to knock down high spot on dent repairs. Depending on the situation the metal end can be used for bare steel panels. Use the rubber end for a softer touch when performing paintless dent repair on painted surfaces or aluminum panels.Blow back is eliminated thanks to the dual flex neck that cushions each strike.
Flip the tool over and the chiseled end is perfectly suited for prying off door panels or removing glue residue and glue attached PDR pulling tabs.
Overall length: 7″
$19.67$24.90Dentfix DF-DB69 Dead Blow Hammer
$19.67$24.90 -
Dentfix DF-DB79K Dead Blow Hammer Kit with 6 Tips
Dentfix DF-DB79K Dead Blow Hammer Kit with 6 Tips – a unique Dead Blow Hammer that can adapts to the technicians paint less dent repair (PDR) tool needs with interchangeable tips. The dual head gives the user two striking ends to knock down high spots on dent repairs. Depending on the situation the steel metal tip can be used for bare steel panels.
Kit includes 6 different interchangeable screw on tips:
Aluminum Round
Steel Round
Rubber Round
Plastic Flat
Brass Round
Brass FlatWhen working with aluminum panels use the aluminum tip to prevent contamination. The rubber or plastic tips can be used for a softer touch when performing paint less dent repair on painted aluminum or steel panels (do not cross contaminate). Both brass tips are non-sparking. Also includes blow-molded storage case.
Blowback is eliminated thanks to the dual flex neck that cushions each strike. Flip the tool over and the chiseled end is perfectly suited for prying off door trim panels or removing glue residue and glue attached PDR pulling tabs. The tool is seven inches in overall length.
$43.07$55.58Dentfix DF-DB79K Dead Blow Hammer Kit with 6 Tips
$43.07$55.58 -
Dentfix DF-DM530SH Glue Puller T-Bar Slide Hammer
DentFix DF-DM530SH Slide Hammer for the Ding Massager
$107.59$136.19Dentfix DF-DM530SH Glue Puller T-Bar Slide Hammer
$107.59$136.19 -
Dentfix DF-DM555UDX Ultra Ding Massager
Dentfix DF-DM555UDX Ultra Ding Massager – Glue pullers are an excellent method for removing dings and small dents from OEM paint. When access to the back panel is not possible, a glue puller is the only means of PDR repair.
The Ultra Ding Massager DF-DM555UDX kit includes:
Squeeze Puller – allows for a massaging action that helps release the tension in the metal, allowing for a quicker more successful pull. The squeezed position holding capabilities allow for a constant pull.
T-Puller
Knock down tool with 2 heads (pointed and rounded)
Slide Hammer – for a more powerful pull on thicker metals, including steel and aluminum.
120V Glue Gun
Plastic Scraper Stick
12 Glue Sticks – specially formulated hot glue provides for strong adhesion yet easy removal using the release agent
24 Different Pulling Nibs – The new and redesigned pulling tabs provide the technician with more choices and nib surfaces for better fitment which improves grip when repairing the many varieties of dings and minor dents from small to large.
Blow Molded Case$373.43$497.91Dentfix DF-DM555UDX Ultra Ding Massager
$373.43$497.91 -
Dentfix DF-DPS1 Door Prop Stick
DentFix DF-DPS1 Door Prop stick – Keeps door open when working on the door’s edge for paintless dent repair rods, when you need more room replacing locks, proper sanding and finishing of panels to not run over into the adjacent panel, and reaching spot welds. Can be used on either side of the car by twisting and locking in place. Length adjustable from 11 to 15 inches.
$30.46$38.56Dentfix DF-DPS1 Door Prop Stick
$30.46$38.56 -
Dentfix DF-DSP310 Door Skin Pliers
Dentfix DF-DSP310 Door Skin Pliers – Single
LARGE RUBBER PAD – Prevents the risk of damaging the front door skin.
T-BAR – Spreads the clamping force and the cushioned outer pad prevents paint marring.
ADJUSTABLE & LOCKABLE – Customize the clamp to perfectly to the required opening and position needed.
CONSTRUCTION: SteelThe Door Skin Pliers are a high quality, adjustable locking clamp specifically designed to hold a door skin in place while allowing full access to the rear door frame flange. Equipped with a large rubber pad on the front to prevent the risk of damaging the front of the door skin. The T bar on the rear side of the clamp allows the user to clamp down the door skin and hold it while bending the skin flange around the door frame.
**It is recommended to use in pairs.$24.15$30.57Dentfix DF-DSP310 Door Skin Pliers
$24.15$30.57 -
Dentfix DF-EZ10 Parking Sensor and Lens Hole Maker
The Parking Sensor and Lens Hole Maker (Part No. DF-EZ10) from Dent Fix Equipment is the precise and clean way to create holes in order to install driver assist sensors on replacement bumpers.
Easy to use with a wide variety of sizes make this tool a must have for any shop.
$160.77$214.36Dentfix DF-EZ10 Parking Sensor and Lens Hole Maker
$160.77$214.36
