-
Dentfix DF-MP050BODY Pneumatic Punch Air tool Only
DentFix DF-MP050BODY Pneumatic Punch Air Tool Only – no punch.
$192.87$257.16Dentfix DF-MP050BODY Pneumatic Punch Air tool Only
$192.87$257.16 -
Dentfix DF-MP050DT 8.0 mm Deep Throated Punch Head for MP-050K
DentFix DF-MP050DT 8.0 mm Deep Throated Punch Head for MP-050K – This extra deep head punches an 8.0mm hole 1.5 inches into the panel. Sold separately from the punch kit (DF-MP050K).
$79.52$106.03 -
Dentfix DF-MP050K Pneumatic Punch Kit with 5 Heads
DentFix DF-MP050K Pneumatic Punch Kit
The ultimate hole punch kit provides the power and versatility to get any job done. The unique design of the cutter shears the metal rather than forcing it’s way through like other flat head cutters. This shearing action creates no distortion and extended life of the tool and cutters.
The included flanging head is 1 inch wide
Hole punch sizes are 4.0 mm, 5.5 mm, 6.5 mm and 8.0 mm
Hole punch depth on 8.0mm is 3.0mm
A deeper 8.0 mm head is now included (DF-MP050DT) for a LIMITED time
1 year warranty$446.60$595.46Dentfix DF-MP050K Pneumatic Punch Kit with 5 Heads
$446.60$595.46 -
Dentfix DF-PDRKit33 33 Pc. Paintless Dent Repair Kit – Stainless Steel
DentFix DF-PDRKIT33 33 Piece Paintless Dent Repair Kit – If you’re looking for a selection of tools that will make the job easy, this is it. The thirty three piece paintless dent repair kit contains an essential gathering of expertly designed and professionally crafted paintless dent removal tools. The right tool for the job means better results and these are the right tools for the job. Instructional video included with set will open the lucrative world of paintless dent removal to you.
$710.30$947.06 -
Dentfix DF-PG10 Dent Out Pro Glue – 10 Pcs.
DentFix DF-PG10 Dent Out Pro Glue – 10 pieces
$37.51$47.48Dentfix DF-PG10 Dent Out Pro Glue – 10 Pcs.
$37.51$47.48 -
Dentfix DF-SG70 Suction Gun
Dentfix DF-SG70 Suction Gun – Produces suction or vacuum that locks in place to create a handle for moving objects like glass and removing taillights.
Quick & Easy Simply press rubber against the surface and squeeze the trigger
Comfortable Pistol grip handle fits perfect in the hand
Safety Move awkward objects in a safe manor
Save Parts Remove snug parts with ease and less chance of breakage.
Rubber pad is 2.75 in diameterMaterial and Surfaces – Can be used with most no porous surfaces as long as a vacuum can be maintained. Intended surface must be clean and free of debris. It is best to wipe the rubber pad before use to remove any dust that might have accumulated.
Ergonomic Handle
Disengage Button
Large Rubber Suction Pad$24.15$30.57Dentfix DF-SG70 Suction Gun
$24.15$30.57 -
Dentfix DF-SP360 Shunting Pliers
Dentfix DF-SP360 Shunting Pliers
Pliers allows for squeeze-type resistance spot welds in coated steels
Allows for a superior Spot Weld and Larger Nugget or Spot ( Watch Video )
Shunting the current flow, to create a successful spot weld
Pliers facilitates the electrical current from one side to the other
Saves E-Coat on the mating surfacesSqueeze-type resistance spot welding (STRSW) sometimes requires additional measures, in the form of shunting the current flow, to create a successful spot weld. Conductive coatings on steel, such as zinc or weld-through primer increase the resistance but a successful weld can be accomplished. Non-conductive coatings on steel, such as E-Coat (a corrosion-resistant primer applied to parts by the manufacturer) inhibit the completion of the spot weld. The E-Coat on the mating surfaces can be saved when using STRSW with the use of the Dent Fix Shunting Pliers (DF-SP360).
Simply remove the coating from only the outside surfaces, position the shunting clamp at the spot weld site, and the spot weld is made at the adjacent site. The current chooses the path of least resistance when confronting the non-conductive E-Coat, the shunting pliers facilitates the electrical current from one side to the other. The E-coat at the mating surface burns away.
$52.70$68.00Dentfix DF-SP360 Shunting Pliers
$52.70$68.00 -
Dentfix DF-SPD48L Large C-Clamp for DF-15 Drill
DentFix DF-SPD48L Large C-Clamp for DF-15 – This optional C-clamp for the Spot Annihilator allows the technician to bring the drilling point three inches into the panel. Conveniently fits inside the deluxe case and is light enough to use every day.
$85.00$113.33Dentfix DF-SPD48L Large C-Clamp for DF-15 Drill
$85.00$113.33 -
Dentfix DF-SPD48M The Mega C-Clamp for DF-15 Drill
DentFix DF-SPD48M The Mega C-Clamp for DF-15 – for the Spot Annihilator. This deep Mega C-clamp allows the technician to bring the drilling point six inches into the panel.
$104.48$139.31Dentfix DF-SPD48M The Mega C-Clamp for DF-15 Drill
$104.48$139.31 -
Dentfix DF-SPD66-10 Cup and Screw for the DF-15 (10 Pack)
This cup and screw attaches to the end of the C-Clamp of the DF-15 Spot Weld Drill Series to protect the C-Clamp.
$35.50$44.94 -
Dentfix DF-SPR/BRAD Blind Rivet Adapter
Dent Fix Equipments SPR Riveters can install blind rivets with the addition of the Blind Rivet Adapter (DF-SPR/BRAD).
The Blind Rivet Adapter is compatible with the SPR Riveter (DF-SPR67) and Push Pull Riveter (DF-SPR69).
A flexible neck allows for the tool to be positioned into hard to reach areas.
The adapter allows the setting of blind rivets with diameters from 4.0 to 7.8 mm for aluminum and 4.0 to 6.4 mm for steel. It has a tensile force is 20 kN.
Both Riveters Sold Separately
$1,891.39$2,149.31Dentfix DF-SPR/BRAD Blind Rivet Adapter
$1,891.39$2,149.31 -
Dentfix DF-SPR70 Self-Piercing Riveter – 10T
Dentfix DF-SPR70 Self-Piercing Riveter – 10 Ton – a reliable tool for riveting aluminum panels (up to 6.5mm with the rivets included in the kit but with optional longer 11mm rivets it can be used to assemble panel thickness of 8 to 9mm) together with high dynamic strength.
• 10 TONS – High pressure SPR capable of handling heavy duty installs.
• PRESSURE CONTROL – Adjustable dial with an easy to read gauge for ultimate control.
• ARM SWIVELS 360˚- C-Arm swings around into multiple positions for maximum access flexibility.
• ERGONOMIC HANDLE – Comfortable operation and stability.
• MAGNETIC DIE- Makes rivet positioning effortless and simple.
Kit includes matrices (3mm SPR, 5mm SPR, Extracting, Flow Form, 6.5mm Hole Punch), 2 matrix keys, center punch, strap, HR110 arm, a sample box of a variety of steel punch rivets, and a carrying case.
2 Year Mnaufactures warranty Warranty.
$7,979.78$9,067.93Dentfix DF-SPR70 Self-Piercing Riveter – 10T
$7,979.78$9,067.93
