-
$294.77$336.88
12 Ton 18″ Screw Type Jack Stand. Designed to assist in stabilizing vehicles on a lift and supporting vehicle components under the vehicle.
Special Features:
Minor adjustments can be made without any lift required.
Formed steel welded base and frame for extra strength.
Easy operation type column adjusts to fit any height position.
Extension screw locking device for extra safety and support.
Large support saddles and handle for easy adjustments.
Sold individually. Pricing is for one stand.
More Information
Capacity (Tons) :12
Minimum Height (in) :17.95
Maximum Heights (in) :27.95
Saddle Diameter (in) :6.63 x 3.50
Base Area (in) Ø :18.38
Weight (lbs) :44.000000
Shop Now
-
$303.50$346.86
Zinko ZPR-056 5 Ton 6″ Hydraulic Pulling Jack- This hydraulic pulling jack is perfect for drawing heavy objects, positioning structures, or lifting heavy loads. It is designed for use with single acting pumps like our ZHP series hand pumps, ZAP series air over hydraulic pumps, and some of the ZPE series electric hydraulic pumps.
High-strength alloy steel construction Chrome-plated piston rods resist wear and corrosion Can be used in any position Easy to handle- weighs only 14 lbs Up to 5 Tons of pulling force Factory tested over rated capacity Country of Origin: Taiwan
Shop Now
-
$314.20$359.09
Zinko ZR-102 10 Ton 2″ Stroke Ram- Multiple application for many different fields that require single-acting ram job service.
A wide variety of rams include short, push, spreader and snap-set type. Chrome-plated piston rods for long life. Polyurethane seals provides high cycle life. Easy to mount and “quick-connect” couplers on all rams for fast set up. Heavy duty return springs provide consistent performance. Country of Origin: Taiwan
Min Ht. 4.78″
Shop Now
-
$318.83$364.38
Mini Jack – 5 ton capacity, Min. Ht. 3.34″. Small size is ideal for centering heavy equipment or making fine adjustments. Compact, and powerful with a very low profile.
Special Features:
Compact, and powerful with a very low profile
Small size is ideal for centering heavy equipment or making fine adjustments
Can be used in conjunction with a mechanical gear puller to create a hydraulic puller with over 5 ton capacity
Can also be used as a spreader to apply force with just over 2-1/2″ of clearance needed
Use in either an upright or horizontal position
Country of Origin: Japan
More Information
Capacity (Tons) :5
Minimum Height (in) :3.34
Maximum Heights (in) :4.92
Ram Lift (in) :1.57
Saddle Diameter (in) Ø :1.10
Base Area (in) :3.70 x 3.50
Weight (lbs) :6.000000
Min Ht. :3 -3/8
Shop Now
-
$319.12$364.71
Overview
Zinko ZHP-30 30 Cubic Inches Two Speed Hand Pump – Designed to be used in many different fields with a vast selection of hydraulic components. Industrial quality, general purpose hand pump. Designed for use in shop, agricultural, automotive/truck service, and construction maintenance. Two speed operation; external adjustable relief valve for application flexibility.
Special Features:
Two Speed pump design is faster and requires less handle strokes reducing operator fatigue.
Works with a wide variety of rams including short, push, spreader and snap-set types.
Extremely portable, great for on site use.
Chrome-plated piston rods for long pump life.
Polyurethane seals allow greater cycle counts reducing service requirements.
Easy to mount design.
Works with “quick-connect” couplers for fast set up.
Heavy duty return springs provide consistent performance.
More Information
Speed :2
Port Size (NPT) :3/8″
Usable Oil Capacity (in³) :30
Pressure Rating – 1st Stage (psi) :200
Pressure Rating – 2nd Stage (psi) :10000
Oil Displacement Per Stroke – 1st Stage (in³) :0.79
Oil Displacement Per Stroke – 2nd Stage (in³) :0.17
Max Handle Effort (lbs) :102
Piston Stroke (in) :0.47
Weight (lbs) :17.000000
Shop Now
-
$329.87$346.50
Overview
For collision repair, industrial and construction applications where convenience of hydraulic power can be utilized for pushingm, pulling, spreading, clamping and lifting operations
Special Features:
The collision repair kits snap-together components make for quick set-ups and come in 4-, 10- and 20-ton versions.
Designed for quick and easy use where portable hydraulic power is needed.
Built-in overload system assures maximum protection of operator and equipment.
High strength heavy wall tubing reinforces parts and extends the life of the tools.
Choose either single-speed or two speed pumps for almost any applications.
All components come in an easy-to-handle carrying case for convenience.
More Information
Capacity (Tons) 4
1. Hydraulic Pump (ZHP-18: single speed)
2. Hose & 1/4″ Coupler (9210104)
3. 4 Ton Ram 5″ Stroke (ZAR-045SP)
4. Spreader Ram
5. Extension Tubes: (4″, 8″, 12″, 16″)
6. Male Connector
Kits Includes:
7. Flat Base
8. 90° “V” Base
9. Wedge Head
10. Spreader Plunger Toe
11. Spreader Ram Toe
12. 2-3/4″ Flex Head
13. Serrated Saddle
14. Carrying Case
Weight (lbs) 43.000000
Shop Now
-
$333.09$380.67
Zinko ZHS-075 3/4 Ton Underhoist Slim Type Stand- Designed to support vehicle components, ideal for any task which requires relieving pressure off the component.
Light-weight, slim design makes handling easy in tight working spaces and torage. Acme screw allows for precise height adjustment. Quick adjust spin handle provides ease of turning under load. Sold as pair.
Country of Origin: Taiwan
Shop Now
-
$340.71$389.38
Zinko ZPR-106 10 Ton 6″ Hydraulic Pulling Jack- This hydraulic pulling jack is perfect for drawing heavy objects, positioning structures, or lifting heavy loads. It is designed for use with single acting pumps like our ZHP series hand pumps, ZAP series air over hydraulic pumps, and some of the ZPE series electric hydraulic pumps.
High-strength alloy steel construction Chrome-plated piston rods resist wear and corrosion Can be used in any position Up to 10 Tons of pulling force Factory tested over rated capacity Country of Origin: Taiwan
Shop Now
-
$349.67$399.62
These two-speed hand pumps come with lightweight aluminum reservoir for portability. Designed to be used in many different fields with a vast selection of hydraulic components. Industrial quality, general purpose hand pump.
Special Features:
The strongest aluminum alloys are used and heat-treated to provide the maximum combination of strength to resist fractures.
Lightweight aluminum reservoir for portability.
The best choice for applications where composite reservoirs may not be suitable.
Large oil capacity to power a wide range of cylinders.
Two-speed pumps provide rapid cylinder’s stroke at 1st stage, minimizing effort. At the 2nd stage, the pumps automatically switch when a load is applied. This allows for faster fills and reduces cycle times for many testing operations.
Country of Origin: Taiwan
More Information
Speed :2
Port Size (NPT) :3/8″
Usable Oil Capacity (in³) :25
Pressure Rating – 1st Stage (psi) :300
Pressure Rating – 2nd Stage (psi) :10000
Oil Displacement Per Stroke – 1st Stage (in³) :0.345
Oil Displacement Per Stroke – 2nd Stage (in³) :0.086
Max Handle Effort (lbs) :100
Piston Stroke (in) :1.00
Weight (lbs) :9.000000
Shop Now
-
$349.75$399.71
Overview
The 10 ton 4″ stroke hydraulic cylinders of our store are designed for use in a variety of applications where lifting, pushing, bending or holding may be required. Ideal for use in shop, agricultural, automotive/truck service, and construction maintenance.
Special Features:
Designed with base mounting holes (4/16-18 UNC) for easy mounting on almost any fixture.
Can be used in any positions.
Harden saddles keep top bearing and plunger from jamming while the saddle grooves help prevent slipping.
Baked enamel finish for outstanding corrosion prevention.
Threaded collar and internal threads withstand full loads for maximum flexibility in fixturing.
Come with a 3/8″ NPT fast flow quick connection coupler and dust cap.
Collar Plunger thread and base mounting hole provide for easy fixture.
Optional adapters make it easy and cost efficient to convert our cylinders from snap-type to threaded-type for your application.
With appropriated accessories, These Industrial Quality Cylinders can be paired with either hand pumps, air pumps, or electric pumps.
More Information
Capacity (Tons) :10
Stroke (in) :4.13
Oil Capacity (in³) :9.27
Cylinder Effective Area (in²) :2.24
Minimum Height (in) :6.73
Maximum Heights (in) :10.86
Outside Diameter (in) :2.24
Weight (lbs) :8.000000
Min Ht. :6.75″
Shop Now
-
$353.19$403.64
Zinko ZAR-106T 10 Ton 6″ Stroke Threaded Ram- Cylinder is threaded on both ends for use in many different frame machines, and anywhere a single acting cylinder is needed.
Threaded ends allow use of cylinder with many machines. Chrome-plated piston rods ensure long service life. Polyurethane seals promote high cycle life. Ram half fast flow “quick-connect” couplers included with all rams for fast, easy setup. Heavy duty return springs provide consistent performance.
Country of Origin: Taiwan
Min Ht. 13.5″ 1 – 1/4″ NPT female threads on the base and 1″ UNC thread on the top
Shop Now
-
$353.29$403.76
Zinko ZHP-42 42 Cubic Inches Two Speed Hand Pump – Designed to be used in many different fields with a vast selection of hydraulic components. Industrial quality, general purpose hand pump. Designed for use in shop, agricultural, automotive/truck service, and construction maintenance. Two speed operation; external adjustable relief valve for application flexibility.
Special Features:
Two Speed pump design is faster and requires less handle strokes reducing operator fatigue.
Works with a wide variety of rams including short, push, spreader and snap-set types.
Extremely portable, great for on site use.
Chrome-plated piston rods for long pump life.
Polyurethane seals allow greater cycle counts reducing service requirements.
Easy to mount design.
Works with “quick-connect” couplers for fast set up.
Heavy duty return springs provide consistent performance.
Country of Origin: Taiwan
More Information
Speed :2
Port Size (NPT) :3/8″
Usable Oil Capacity (in³) :42
Pressure Rating – 1st Stage (psi) :200
Pressure Rating – 2nd Stage (psi) :10000
Oil Displacement Per Stroke – 1st Stage (in³) :0.79
Oil Displacement Per Stroke – 2nd Stage (in³) :0.17
Max Handle Effort (lbs) :87
Piston Stroke (in) :1.10
Weight (lbs) :21.000000
Shop Now
High-Performance Tools for Body Shops & Auto Repair Professionals
At KGM Equipment, our mission is to support automotive professionals with tools and equipment that make a real difference in daily shop performance. We understand the demands of a fast-paced shop environment, where efficiency, accuracy, and durability are non-negotiable. That’s why every product in our catalog is carefully selected for its ability to help you work faster, smarter, and with greater precision.
Whether you're engaged in metal fabrication, detailed paintwork, or complex collision repair, we provide the right tools to keep your workflow running smoothly. Our selection includes everything from high-quality specialty accessories to heavy-duty cleaning equipment designed to handle tough jobs. Every item we offer is backed by performance, reliability, and practical value—because we know that in the shop, your tools need to work just as hard as you do. At KGM Equipment, we don’t just supply tools—we deliver dependable solutions that help you achieve better results every time.
Precision Work Made Simple with the Bumper Perfect Hole Punch
One of the most time-saving tools in our catalog is the bumper perfect hole punch. This compact tool is designed to deliver clean, accurate holes in plastic bumpers with minimal effort. Whether you're installing sensors, clips, or mounts, you’ll appreciate the speed and consistency this tool offers.
The bumper perfect hole punch takes the guesswork out of modifying bumpers. It’s ideal for both OEM work and aftermarket installations. Used by body shops nationwide, this tool improves workflow, reduces mistakes, and ensures a professional finish every time. If you're still cutting by hand, this is the upgrade your team will thank you for.
Mobility Matters: The Innovative Truck Bed Dolly
Working on truck beds or large panels? You need a mobile solution that makes handling easier and safer. That’s where the innovative truck bed dolly comes in. Built for strength and maneuverability, it supports heavy components while allowing full access for sanding, painting, or welding.
When it comes to working on truck beds, oversized panels, or heavy vehicle components, mobility can make all the difference. That’s why the innovative truck bed dolly has become an essential piece of equipment in many modern body shops. Designed with both strength and maneuverability in mind, this dolly allows technicians to safely support and move large parts with ease, without compromising stability or access.
Whether you're preparing a surface for paint, performing structural repairs, or welding, the truck bed dolly gives you 360-degree access to the component. This enables a more thorough, efficient, and comfortable workflow. No more bending awkwardly or repositioning heavy parts multiple times. The dolly holds everything securely while letting you focus on precision work.
This tool is especially valuable in collision repair centers, restoration shops, and custom build facilities, where large panels are frequently removed and refinished. By making transport and positioning easier, the truck bed dolly not only increases productivity but also significantly reduces the risk of accidents, strain injuries, and costly damage to freshly painted or prepped surfaces.
With rugged wheels, height adjustability, and a heavy-duty frame, it’s built to handle real shop environments and repeated daily use. When mobility matters and efficiency counts, the truck bed dolly is the tool that helps your team work faster, smarter, and safer.
Hustle Smarter with the Hustler Stick
Every shop needs tools that help technicians move quickly and with precision. The hustler stick is a simple but essential item for guiding panels, adjusting alignment, or maneuvering parts during assembly. Whether you’re doing bodywork or prepping a vehicle for paint, the hustler stick helps you keep control without putting your hands at risk. Its compact size and durable design make it a go-to in any bay where speed and accuracy are key.
Deep Cleaning Power with Steam Jenny Pressure Washers
Cleanliness is a critical part of any auto repair or detailing job. That’s why we stock Steam Jenny pressure washers—trusted for their powerful performance and reliability. Whether you're removing grease, prepping surfaces, or detailing a finished vehicle, these machines deliver serious cleaning capability.
It combines heat and high pressure to tackle the toughest grime without harsh chemicals. They’re ideal for shop use, fleet maintenance, and equipment cleaning, offering the performance professionals need day in and day out.
Equip Your Shop with Tools That Work
At KGM Equipment, we understand the importance of using the right tool for the job. Whether you're investing in a bumper perfect hole punch, rolling in a truck bed dolly, or deep-cleaning with a Steam Jenny pressure washer, you can count on quality, durability, and performance. Explore our collection today and take your shop workflow to the next level—with tools that make every task easier, safer, and more precise.
Frequently Asked Questions
What types of shops benefit from your specialty tools?
Our tools are designed for collision repair centers, auto body shops, restoration facilities, and mobile technicians. Whether you're doing fabrication, paintwork, or detailing, our equipment is built to meet the real demands of professional automotive environments.
What is the bumper perfect hole punch used for?
The bumper perfect hole punch creates precise, clean holes in plastic bumpers—ideal for installing sensors, clips, and mounts. It's a fast, reliable alternative to manual cutting and helps ensure professional, repeatable results every time.
Is the truck bed dolly adjustable or suitable for all truck models?
Yes. Our truck bed dolly is designed for universal compatibility with most truck beds and large body panels. It offers height adjustability and a heavy-duty frame to safely support and move components during repairs, paintwork, or fabrication.
What does the Hustler Stick do?
The Hustler Stick is a lightweight alignment tool used to guide panels, adjust positioning, and maneuver parts during assembly or repairs. It gives technicians better control while keeping hands safe, making it perfect for fast-paced work.
Are Steam Jenny pressure washers safe for auto detailing?
Absolutely. Steam Jenny pressure washers combine heat and high pressure to remove dirt, grease, and debris without using harsh chemicals. They're widely used for auto detailing, fleet cleaning, and shop maintenance due to their effectiveness and reliability.
Can your support team help me choose the right tool for my shop?
Yes. Our experienced team is available to help you choose tools that match your workflow, budget, and shop needs. Whether you're expanding or upgrading, we’ll guide you to equipment that delivers real value and performance.
