-
Mo-Clamp 7300 Strut Tower Alignment Gauge
MO-Clamp 7300 Strut Tower Alignment Gauge – Measures strut tower height at both forward and aft locations. Determines centerline and locates lower control arm centerline position. Use in conjunction with the #7200 Deluxe Centerline Gauge. Measurements are in metric units. Includes 4″ (102mm) Reverse Cone Pointer, 8″ (203mm) Reverse Cone Pointer, 4″ (102mm) Tower Pointer, and 8″ (203mm) Tower Pointer.
Replacement Parts: #710106 4″ (102mm) Reverse Cone Pointer, #710107 8″ (203mm) Reverse Cone Pointer, #710109 4″ (102mm) Tower Pointer, #710108 8″ (203mm) Tower Pointer Made in the U.S.A.
$1,090.10$1,634.94Mo-Clamp 7300 Strut Tower Alignment Gauge
$1,090.10$1,634.94 -
Mo-Clamp 7400 Mo-Pro Gauge Package
MO-Clamp 7400 Mo-Pro Gauge Package Also referred to as ” Tool Package C” 9020023 – This package includes #7001 Universal Tram Gauge, #7200 Deluxe Centerline Gauge, #7300 Strut Tower Alignment Gauge, display board and hooks. Be sure to use your uni-body and chassis dimension and specification charts.
Replacement Parts: #710120 Board Only, #710126 Hook Set Only Made in the U.S.A.
$4,914.34$7,585.62Mo-Clamp 7400 Mo-Pro Gauge Package
$4,914.34$7,585.62 -
Mo-Clamp 806 Pull Plate for Tac-N-Pull 6″
MO-Clamp 0806 Pull Plate for Tac-N-Pull 6″
$19.66$24.96Mo-Clamp 806 Pull Plate for Tac-N-Pull 6″
$19.66$24.96 -
Mo-Clamp 850019 Thumb Screw for 7000/7001/7050 Trams
MO-Clamp 850019 Thumb Screw for 7000/7001/7050 (Parts Breakdown shown above: Thumb screw is #3-requires Qty of 8).
$1.37$1.45 -
Mo-Clamp 850059 8″ Pointer for 7000/7001/7050
MO-Clamp 850059 8″ Pointer for 7000/7001/7050
$88.08$119.84Mo-Clamp 850059 8″ Pointer for 7000/7001/7050
$88.08$119.84 -
Mo-Clamp 850061 24″ Pointer for 7000/7001
MO-Clamp 850061 24″ Pointer for 7000/7001
$95.51$129.95Mo-Clamp 850061 24″ Pointer for 7000/7001
$95.51$129.95 -
-
Mo-Clamp 9450 4 Way Leg with Washer and Bolt for MO-2400
MO-Clamp 9450 4 Way Leg with Washer & Bolt
$121.70$178.32Mo-Clamp 9450 4 Way Leg with Washer and Bolt for MO-2400
$121.70$178.32 -
Mo-Clamp 9701 Small Wedge for B, C, Jr Or Mini-C
MO-Clamp 9701 Small Wedge for B, C, JR or Mini-C
$52.09$66.15Mo-Clamp 9701 Small Wedge for B, C, Jr Or Mini-C
$52.09$66.15 -
Mo-Clamp 9702 Small Round Wedge for Dyna-Mo
MO-Clamp 9702 Small Round Wedge for Dyna-Mo
$41.03$52.10Mo-Clamp 9702 Small Round Wedge for Dyna-Mo
$41.03$52.10 -
Mo-Clamp 9801 Large Wedge for MO-0400 W Clamp
MO-Clamp 9801 Large Wedge for MO-0400 W Clamp
$98.31$133.75Mo-Clamp 9801 Large Wedge for MO-0400 W Clamp
$98.31$133.75 -
Portable Pull Tower by Dent Fix
Game-changing pulling angles in a lightweight and highly mobile.
ApplicationUtilized for the straightening of automotive body panels. Self-stabilizing via an air-vacuum anchoring system, allows user to work at a more comfortable height without strain on the body.
Not suitable for straightening or repairing of structural vehicle parts.
IncludesSolid Suction Base
Seal Gasket and Four Pads
Tower with Multiple Height Settings
Winch
Winch Support line
6-Finger Bear Claw
Two Wheels
High Performance Noise Silencer
SpecificationsPulling Force: 770 lbs. (Top & Bottom)
Max Pull Height: 52”
Line Capacity: 2,200 lbs
Line Length: 78”
Unit Weight: 68 lbs
Max PSI: 72 > 116 PSI
Air Inlet: 1/4
Base Dimensions: 14.5” x 24”
Base Feature: 4 Anti-Slip Pads
Seal for Plate: 68”
Weight: 67 lbs.
Shipping Dimensions: 46.5″ L x 15.7″ W x 3.5″ H$1,900.00$1,975.00Portable Pull Tower by Dent Fix
$1,900.00$1,975.00
