-
Zinko ZATJ-350 35ton Air Hydraulic Truck Jack
Zinko ZATJ-350 35 Ton Air Hydraulic Truck Jack- 35 ton air hydraulic truck jack with screw extension and adapter hole. All steel welded construction heavy duty units made for use on trucks, buses and agricultural machinery.
Units are lightweight yet are built for heavy duty use. All ZATJ series are fast, smooth, and efficient due to their all-steel wedge construction. Includes a flow control valve to prevent the ram from sudden falls. Quick lift mechanism allows a shortened ram lifting time without load. Specially processed air pump for low-noise operation. 2 large rubber-tire wheels and 3 position locking T-handle make this jack easy to fit into any space.
Country of Origin: Japan$2,646.88$3,025.00Zinko ZATJ-350 35ton Air Hydraulic Truck Jack
$2,646.88$3,025.00 -
Booster Pac HT1224AGM Commercial Jump Starter/Charger
Booster PAC HT1224AGM Commercial Jump Starter/Charger -Truck Ship Only. HazMat.
The “Big Boy” of wheeled jump starting units has gotten an upgrade: features installed AGM batteries to increase unit longevity and eliminate spill hazards
Specifically designed for over-the-road transportation and heavy-duty implements starting applications
It exceeds the challenges of frigid weather and delivers the instant raw power of 1400 cold cranking amps in 12 Volt mode and 800 cold cranking amps in 24 Volt mode
Features 10 ft. cable leads made of 1/0 cable to reaching the starting points on vehicles of all shapes and sizes
Automatic 7 Amp x 2 Channel Battery Charging System
Ships with (2) Group 31 AGM Batteries Installed
1 Year Limited Warranty$2,551.42$2,934.14Booster Pac HT1224AGM Commercial Jump Starter/Charger
$2,551.42$2,934.14 -
Zinko ZWF-32 32ton Floor Slim Wedge Jacks No Gauge
Overview
This lightweight, portable, and easy-to-use wegde jacks make for a simple, one person operation and are and ideal choice for rescue operations. Designed to penetrate and open, the heavy-duty cylinder allows for an easy return. The unique interlocking wedge design eliminates first step bending and risk of slipping out of the joint. With these units, there is no need for additional tools or chainblocks. The 360? handle makes for easy usage in any position.
Special Features:
All models have a self contained reservoir and are equipped with a single plunger.
All models are designed with a compact frame which reduces weight for greater portability,also come with a classic wooden storage case for easy transport.
Built in 4-way, 3 position manual valve for easy advance and retraction.
Designed with a shorter compact frame which reduces weight for greater portability. It also comes with a classic wooden storage case for easy transport.
More Information
Capacity (Tons) :32
Stroke (in) :5.50
Minimum Height (in) :0.24
Maximum Heights (in) :1.34
Wedge Plate (in) :2.43
Body Length (in) :21.75
Weight (lbs) :39.000000$2,478.75$2,832.86Zinko ZWF-32 32ton Floor Slim Wedge Jacks No Gauge
$2,478.75$2,832.86 -
Zinko ZJJ-3513 35ton 5″ Stroke Journal Mechanical Jack
35 Ton 5.11″ Stroke Journal Mechcanical Jack- Beveled gear construction combines the precision forging pinion to provide shifted tooth form, strong and excellent interlocking.
Special Features:
Unique construction bearing is made for longer life and smooth horizontal advance.
Rigidly designed screw made by chrome -molybdenum steel to withstand excessive load.
Beveled ring gear interlocks with the precision forged pinion to provide shifted tooth form for strong and excellent interlocking.
Special ratchet handle interior design with nickel-chrome wheel and plunger enables strong rotation for an easy , smooth operation.
Buttress threads will not creep down under load.
Operable vertically or laterally (lateral movement requires optional traversing bed).Country of Origin: Japan
More Information
Capacity (Tons) :35
Stroke (in) :5.11
Operation Force (Ft. / lb.) :740
Minimum Height (in) :11.02
Maximum Heights (in) :14.44
Saddle Diameter (in) :3.42
Base Diameter (in) :5.78
Weight (lbs) :70.000000Minimum Height 11 inches.
$2,416.86$2,762.13Zinko ZJJ-3513 35ton 5″ Stroke Journal Mechanical Jack
$2,416.86$2,762.13 -
Zinko ZJJ-2525 25ton 10″ Stroke Journal Mechanical Jack
25 Ton 9.84″ Stroke Journal Mechcanical Jack- Beveled gear construction combines the precision forging pinion to provide shifted tooth form, strong and excellent interlocking.
Special Features:
Unique construction bearing is made for longer life and smooth horizontal advance.
Rigidly designed screw made by chrome -molybdenum steel to withstand excessive load.
Beveled ring gear interlocks with the precision forged pinion to provide shifted tooth form for strong and excellent interlocking.
Special ratchet handle interior design with nickel-chrome wheel and plunger enables strong rotation for an easy , smooth operation.
Buttress threads will not creep down under load.
Operable vertically or laterally (lateral movement requires optional traversing bed).Country of Origin: Japan
More Information
Capacity (Tons) :25
Stroke (in) :9.84
Operation Force (Ft. / lb.) :520
Minimum Height (in) :15.55
Maximum Heights (in) :25.39
Saddle Diameter (in) :3.03
Base Diameter (in) :5.00
Weight (lbs) :60.000000$2,416.86$2,762.13Zinko ZJJ-2525 25ton 10″ Stroke Journal Mechanical Jack
$2,416.86$2,762.13 -
The MAXI EX – 110V Dent Fix
DESCRIPTION:
One of the Most Common Steel Panel Repair Areas is the Dog-Leg or Door Repair. The MAXI EX configuration brings the technician eye level with the damage. The ergonomic position saves the tech from bending over or kneeling and prevents unnecessary daily stress on their body.Just WELD • PULL • TWIST! The Dent Fix Equipment MAXI DF-505EX110 is a 110 volt single phase steel dent pulling station that provides the technician with the power they need to shrink, pull rocker panels, hail damage, creases, dents in hard to access areas and all types of metal damage.
The efficiency of this tool increases the workers productivity while producing a cleaner, better repair. Taking the idea of a stud welder one step further, this versatile tool will:
1. Weld pins & keys
2. Weld a slide hammer directly to the panel
3. Weld a light pulling rod
4. Weld wiggle wire for even crease pulling
5. Weld a rod for leverage pulling
6. Shrink metalINCLUDES: EX Edition includes the MAXI 110V (DF-505/110V: Leverage Puller, Rods, Claws, Electrodes, and Consumables), 2 Accessories Shelves (DF-505AT), Padded Seat (DF-505MS), and an Extended Handle (DF-505PHXT, replaces standard handle that comes with t
$2,395.00The MAXI EX – 110V Dent Fix
$2,395.00 -
The MAXI EX – 110V
Product Description
MAXI-MIZE your steel panel repairs with the special MAXI EX configuration!APPLICATION:
Efficiently repairs light to moderate collision damage on automotive steel panels for a cleaner, better repair.FEATURE & BENEFITS:
LEGENDARY – #1 Steel Dent Repair Station preferred by technicians around the world.
EXTENDED HANDLE – Organizes the cables out of the way for safe, nimble movement of the unit.
PADDED SEAT – Extra storage and brings the technician to eye level with the repair area.
ACCESSORY TRAYS – Holds the consumables and tools poised & ready for rapid deployment.
DESCRIPTION:
One of the Most Common Steel Panel Repair Areas is the Dog-Leg or Door Repair. The MAXI EX configuration brings the technician eye level with the damage. The ergonomic position saves the tech from bending over or kneeling and prevents unnecessary daily stress on their body.Just WELD • PULL • TWIST! The Dent Fix Equipment MAXI DF-505EX110 is a 110 volt single phase steel dent pulling station that provides the technician with the power they need to shrink, pull rocker panels, hail damage, creases, dents in hard to access areas and all types of metal damage.
The efficiency of this tool increases the workers productivity while producing a cleaner, better repair. Taking the idea of a stud welder one step further, this versatile tool will:
1. Weld pins & keys
2. Weld a slide hammer directly to the panel
3. Weld a light pulling rod
4. Weld wiggle wire for even crease pulling
5. Weld a rod for leverage pulling
6. Shrink metalINCLUDES: EX Edition includes the MAXI 110V (DF-505/110V: Leverage Puller, Rods, Claws, Electrodes, and Consumables), 2 Accessories Shelves (DF-505AT), Padded Seat (DF-505MS), and an Extended Handle (DF-505PHXT, replaces standard handle that comes with the unit)!
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
The Dent Fix website and databases are all intended to be used as a GUIDE ONLY – it is important to remember that the auto body professional performing the repair is in a position to thoroughly inspect, diagnose and identify the methodology and their unique cost of the vehicle damage repair.
$2,206.23$2,395.00The MAXI EX – 110V
$2,206.23$2,395.00 -
The MAXI EX – 220V
Product Details
MAXI-MIZE your steel panel repairs with the special MAXI EX configuration!APPLICATION:
Efficiently repairs light to moderate collision damage on automotive steel panels for a cleaner, better repair.FEATURE & BENEFITS:
LEGENDARY – #1 Steel Dent Repair Station preferred by technicians around the world.
EXTENDED HANDLE – Organizes the cables out of the way for safe, nimble movement of the unit.
PADDED SEAT – Extra storage and brings the technician to eye level with the repair area.
ACCESSORY TRAYS – Holds the consumables and tools poised & ready for rapid deployment.
DESCRIPTION:
One of the Most Common Steel Panel Repair Areas is the Dog-Leg or Door Repair. The MAXI EX configuration brings the technician eye level with the damage. The ergonomic position saves the tech from bending over or kneeling and prevents unnecessary daily stress on their body.Just WELD • PULL • TWIST! The Dent Fix Equipment MAXI DF-505EX220 is a 220 volt single phase steel dent pulling station that provides the technician with the power they need to shrink, pull rocker panels, hail damage, creases, dents in hard to access areas and all types of metal damage.
The efficiency of this tool increases the workers productivity while producing a cleaner, better repair. Taking the idea of a stud welder one step further, this versatile tool will:
1. Weld pins & keys
2. Weld a slide hammer directly to the panel
3. Weld a light pulling rod
4. Weld wiggle wire for even crease pulling
5. Weld a rod for leverage pulling
6. Shrink metalINCLUDES: EX Edition includes the MAXI 220V (DF-505/220V: Leverage Puller, Rods, Claws, Electrodes, and Consumables), 2 Accessories Shelves (DF-505AT), Padded Seat (DF-505MS), and an Extended Handle (DF-505PHXT, replaces standard handle that comes with the unit)!
The Dent Fix website and databases are all intended to be used as a GUIDE ONLY – it is important to remember that the auto body professional performing the repair is in a position to thoroughly inspect, diagnose and identify the methodology and their unique cost of the vehicle damage repair.
$2,180.36$2,295.00The MAXI EX – 220V
$2,180.36$2,295.00 -
Zinko ZATJ-250 25ton Air Hydraulic Truck Jack
Zinko ZATJ-250 25 Ton Air Hydraulic Truck Jack- All steel welded construction heavy duty units made for use on trucks, buses and agricultural machinery.
Units are lightweight yet are built for heavy duty use. All ZATJ series are fast, smooth, and efficient due to their all-steel wedge construction. Includes a flow control valve to prevent the ram from sudden falls. Quick lift mechanism allows a shortened ram lifting time without load. Specially processed air pump for low-noise operation. 2 large rubber-tire wheels and 3 position locking T-handle make this jack easy to fit into any space. Country of Origin: Japan$2,165.63$2,475.00Zinko ZATJ-250 25ton Air Hydraulic Truck Jack
$2,165.63$2,475.00 -
Zinko ZM-1500T 1.5ton Floor Type Transmission Jack Low Profile
Zinko ZM-1500T 1.5 Ton Floor Type Transmission Jack Low Profile- Designed specially for large-sized vehicles. Cylinder and attachement are oil-leak proof and light weight for ease of movement and service.
High efficiency of pump and plunger giving fast and smooth lifting of transmission in a simple operation by minimum labor. Saddle adjustable for forward and backward, or side tilt and sidewise movement. Valve for the hydraulic unit is independent enabling simple interchange after a long use.
Country of Origin: Taiwan$1,985.00$2,268.57Zinko ZM-1500T 1.5ton Floor Type Transmission Jack Low Profile
$1,985.00$2,268.57 -
DentFix 505/110 Maxi Dent Removal System, 110 Volt
DentFix DF-505 Maxi Dent Removal System 110 Volt
MAXI DF-505/110V
WELD – PULL – TWIST
Provides power needed to shrink, pull rocker panels, hail damage, creases, dents
Increases workers productivity while producing a cleaner, better repair.
Versatile tool will Weld Pins
Weld a slide hammer directly to the panel
Weld a light pulling rod
Weld wiggle wire for even crease pulling
Weld a rod for leverage pulling
Shrink metal
5 Year Warranty
Made in USA
Complete kit includes110 volt unit
two light pulling rods
two slide hammer rods with strike weight
stud pin electrode, shrinking electrode, wiggle wire weld tip
nine and four finger Bear Claw
optional DF-509 rolling cart is available separately.
Complete kit includes: The Maxi 110 volt unit, two light pulling rods, two slide hammer rods with strike weight, stud pin electrode, shrinking electrode, wiggle wire weld tip, a nine and four finger Bear Claw, 500 stud weld pins, 1 pound of wiggle wire, 21 feet of power cable, and nine feet of welding cable.Taking the idea of a stud welder one step further, this versatile tool will: 1. Weld pins 2. Weld a slide hammer directly to the panel 3. Weld a light pulling rod 4. Weld wiggle wire for even crease pulling 5. Weld a rod for leverage pulling 6. Shrink metal
$1,971.25$2,240.05DentFix 505/110 Maxi Dent Removal System, 110 Volt
$1,971.25$2,240.05 -
Zinko ZASJ-30M 3ton Air Hydraulic Service Jack
Zinko ZASJ-30M 3 Ton Air Hydraulic Service Jack- Easy to operate with push button floor jack with an air pump. Designed for use on trucks, automotive and agricultural equipment. Extra long chassis reaches under low overhangs.
The lift can be operated manually and pneumatically. Overall construction of selected steel frame, full swivel rear caster wheels, and large lifting cap provide easy positioning and enable this jack to handle the largest loads. Air hydraulic pump with air pressure ranges from 90 to 140 psi can be operated by the puch button device for a quick lift. Push button control unit can be easily removed from handle for remote operation. With a foot pumpng device, you can raise the jack saddle up to the loading point hand free. T-Handle permits easier maeuvering. It can be locked in one of three positions so that is is convenient to position the jack under the load. Large knob provides load release conrol. Built-in automatic safety valve prevents overloading and also protects the ram plunger from being pushed up beyond the upper limit.
Country of Origin: Japan$1,960.00$2,240.00Zinko ZASJ-30M 3ton Air Hydraulic Service Jack
$1,960.00$2,240.00
