-
Zinko ZRH-606 60ton 6″ Stroke Single Acting Cylinder Hollow Plunger
Zinko ZRH-606 60 Ton 6″ Stroke Single Acting Cylinder Hollow Plunger- Design for use in a variety of applications where lifting, pushing, bending or holding may be required.
High-strength alloy steel construction. Chrome-plated piston rods resist wear and corrosion. Special bearing design helps prevent galling for long life and trouble-free performance. Polyurethane seals and wipers to reduce contamination, extending cylinder life. Hardened saddles keep top bearing and plunger from jamming. Saddle grooves help prevent slipping. Heavy-duty spring enables consistent fast plunger retraction. All models come with fast-flow quick-connection coupler and dust cap. May be used in any position. Hollow plunger design allows for both pull and push forces.
Country of Origin: Taiwan
Min Ht. 12.75″$2,761.19$3,155.64Zinko ZRH-606 60ton 6″ Stroke Single Acting Cylinder Hollow Plunger
$2,761.19$3,155.64 -
Zinko ZATJ-350 35ton Air Hydraulic Truck Jack
Zinko ZATJ-350 35 Ton Air Hydraulic Truck Jack- 35 ton air hydraulic truck jack with screw extension and adapter hole. All steel welded construction heavy duty units made for use on trucks, buses and agricultural machinery.
Units are lightweight yet are built for heavy duty use. All ZATJ series are fast, smooth, and efficient due to their all-steel wedge construction. Includes a flow control valve to prevent the ram from sudden falls. Quick lift mechanism allows a shortened ram lifting time without load. Specially processed air pump for low-noise operation. 2 large rubber-tire wheels and 3 position locking T-handle make this jack easy to fit into any space.
Country of Origin: Japan$2,646.88$3,025.00Zinko ZATJ-350 35ton Air Hydraulic Truck Jack
$2,646.88$3,025.00 -
Booster Pac HT1224AGM Commercial Jump Starter/Charger
- SKU:
- TCB-HT1224AGM
- UPC:
- 687927323803
- Availability:
- Usually Ships in 24 to 48 Hours
$2,551.42$2,934.14Booster Pac HT1224AGM Commercial Jump Starter/Charger
$2,551.42$2,934.14 -
Booster Pac HT1224AGM Commercial Jump Starter/Charger
Booster PAC HT1224AGM Commercial Jump Starter/Charger -Truck Ship Only. HazMat.
The “Big Boy” of wheeled jump starting units has gotten an upgrade: features installed AGM batteries to increase unit longevity and eliminate spill hazards
Specifically designed for over-the-road transportation and heavy-duty implements starting applications
It exceeds the challenges of frigid weather and delivers the instant raw power of 1400 cold cranking amps in 12 Volt mode and 800 cold cranking amps in 24 Volt mode
Features 10 ft. cable leads made of 1/0 cable to reaching the starting points on vehicles of all shapes and sizes
Automatic 7 Amp x 2 Channel Battery Charging System
Ships with (2) Group 31 AGM Batteries Installed
1 Year Limited Warranty$2,551.42$2,934.14Booster Pac HT1224AGM Commercial Jump Starter/Charger
$2,551.42$2,934.14 -
Zinko ZWF-32 32ton Floor Slim Wedge Jacks No Gauge
Overview
This lightweight, portable, and easy-to-use wegde jacks make for a simple, one person operation and are and ideal choice for rescue operations. Designed to penetrate and open, the heavy-duty cylinder allows for an easy return. The unique interlocking wedge design eliminates first step bending and risk of slipping out of the joint. With these units, there is no need for additional tools or chainblocks. The 360? handle makes for easy usage in any position.
Special Features:
All models have a self contained reservoir and are equipped with a single plunger.
All models are designed with a compact frame which reduces weight for greater portability,also come with a classic wooden storage case for easy transport.
Built in 4-way, 3 position manual valve for easy advance and retraction.
Designed with a shorter compact frame which reduces weight for greater portability. It also comes with a classic wooden storage case for easy transport.
More Information
Capacity (Tons) :32
Stroke (in) :5.50
Minimum Height (in) :0.24
Maximum Heights (in) :1.34
Wedge Plate (in) :2.43
Body Length (in) :21.75
Weight (lbs) :39.000000$2,478.75$2,832.86Zinko ZWF-32 32ton Floor Slim Wedge Jacks No Gauge
$2,478.75$2,832.86 -
Zinko ZJJ-3513 35ton 5″ Stroke Journal Mechanical Jack
35 Ton 5.11″ Stroke Journal Mechcanical Jack- Beveled gear construction combines the precision forging pinion to provide shifted tooth form, strong and excellent interlocking.
Special Features:
Unique construction bearing is made for longer life and smooth horizontal advance.
Rigidly designed screw made by chrome -molybdenum steel to withstand excessive load.
Beveled ring gear interlocks with the precision forged pinion to provide shifted tooth form for strong and excellent interlocking.
Special ratchet handle interior design with nickel-chrome wheel and plunger enables strong rotation for an easy , smooth operation.
Buttress threads will not creep down under load.
Operable vertically or laterally (lateral movement requires optional traversing bed).Country of Origin: Japan
More Information
Capacity (Tons) :35
Stroke (in) :5.11
Operation Force (Ft. / lb.) :740
Minimum Height (in) :11.02
Maximum Heights (in) :14.44
Saddle Diameter (in) :3.42
Base Diameter (in) :5.78
Weight (lbs) :70.000000Minimum Height 11 inches.
$2,416.86$2,762.13Zinko ZJJ-3513 35ton 5″ Stroke Journal Mechanical Jack
$2,416.86$2,762.13 -
Zinko ZJJ-2525 25ton 10″ Stroke Journal Mechanical Jack
25 Ton 9.84″ Stroke Journal Mechcanical Jack- Beveled gear construction combines the precision forging pinion to provide shifted tooth form, strong and excellent interlocking.
Special Features:
Unique construction bearing is made for longer life and smooth horizontal advance.
Rigidly designed screw made by chrome -molybdenum steel to withstand excessive load.
Beveled ring gear interlocks with the precision forged pinion to provide shifted tooth form for strong and excellent interlocking.
Special ratchet handle interior design with nickel-chrome wheel and plunger enables strong rotation for an easy , smooth operation.
Buttress threads will not creep down under load.
Operable vertically or laterally (lateral movement requires optional traversing bed).Country of Origin: Japan
More Information
Capacity (Tons) :25
Stroke (in) :9.84
Operation Force (Ft. / lb.) :520
Minimum Height (in) :15.55
Maximum Heights (in) :25.39
Saddle Diameter (in) :3.03
Base Diameter (in) :5.00
Weight (lbs) :60.000000$2,416.86$2,762.13Zinko ZJJ-2525 25ton 10″ Stroke Journal Mechanical Jack
$2,416.86$2,762.13 -
The MAXI EX – 110V Dent Fix
DESCRIPTION:
One of the Most Common Steel Panel Repair Areas is the Dog-Leg or Door Repair. The MAXI EX configuration brings the technician eye level with the damage. The ergonomic position saves the tech from bending over or kneeling and prevents unnecessary daily stress on their body.Just WELD • PULL • TWIST! The Dent Fix Equipment MAXI DF-505EX110 is a 110 volt single phase steel dent pulling station that provides the technician with the power they need to shrink, pull rocker panels, hail damage, creases, dents in hard to access areas and all types of metal damage.
The efficiency of this tool increases the workers productivity while producing a cleaner, better repair. Taking the idea of a stud welder one step further, this versatile tool will:
1. Weld pins & keys
2. Weld a slide hammer directly to the panel
3. Weld a light pulling rod
4. Weld wiggle wire for even crease pulling
5. Weld a rod for leverage pulling
6. Shrink metalINCLUDES: EX Edition includes the MAXI 110V (DF-505/110V: Leverage Puller, Rods, Claws, Electrodes, and Consumables), 2 Accessories Shelves (DF-505AT), Padded Seat (DF-505MS), and an Extended Handle (DF-505PHXT, replaces standard handle that comes with t
$2,395.00The MAXI EX – 110V Dent Fix
$2,395.00 -
The MAXI EX – 110V
Product Description
MAXI-MIZE your steel panel repairs with the special MAXI EX configuration!APPLICATION:
Efficiently repairs light to moderate collision damage on automotive steel panels for a cleaner, better repair.FEATURE & BENEFITS:
LEGENDARY – #1 Steel Dent Repair Station preferred by technicians around the world.
EXTENDED HANDLE – Organizes the cables out of the way for safe, nimble movement of the unit.
PADDED SEAT – Extra storage and brings the technician to eye level with the repair area.
ACCESSORY TRAYS – Holds the consumables and tools poised & ready for rapid deployment.
DESCRIPTION:
One of the Most Common Steel Panel Repair Areas is the Dog-Leg or Door Repair. The MAXI EX configuration brings the technician eye level with the damage. The ergonomic position saves the tech from bending over or kneeling and prevents unnecessary daily stress on their body.Just WELD • PULL • TWIST! The Dent Fix Equipment MAXI DF-505EX110 is a 110 volt single phase steel dent pulling station that provides the technician with the power they need to shrink, pull rocker panels, hail damage, creases, dents in hard to access areas and all types of metal damage.
The efficiency of this tool increases the workers productivity while producing a cleaner, better repair. Taking the idea of a stud welder one step further, this versatile tool will:
1. Weld pins & keys
2. Weld a slide hammer directly to the panel
3. Weld a light pulling rod
4. Weld wiggle wire for even crease pulling
5. Weld a rod for leverage pulling
6. Shrink metalINCLUDES: EX Edition includes the MAXI 110V (DF-505/110V: Leverage Puller, Rods, Claws, Electrodes, and Consumables), 2 Accessories Shelves (DF-505AT), Padded Seat (DF-505MS), and an Extended Handle (DF-505PHXT, replaces standard handle that comes with the unit)!
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
The Dent Fix website and databases are all intended to be used as a GUIDE ONLY – it is important to remember that the auto body professional performing the repair is in a position to thoroughly inspect, diagnose and identify the methodology and their unique cost of the vehicle damage repair.
$2,206.23$2,395.00The MAXI EX – 110V
$2,206.23$2,395.00 -
The MAXI EX – 220V
Product Details
MAXI-MIZE your steel panel repairs with the special MAXI EX configuration!APPLICATION:
Efficiently repairs light to moderate collision damage on automotive steel panels for a cleaner, better repair.FEATURE & BENEFITS:
LEGENDARY – #1 Steel Dent Repair Station preferred by technicians around the world.
EXTENDED HANDLE – Organizes the cables out of the way for safe, nimble movement of the unit.
PADDED SEAT – Extra storage and brings the technician to eye level with the repair area.
ACCESSORY TRAYS – Holds the consumables and tools poised & ready for rapid deployment.
DESCRIPTION:
One of the Most Common Steel Panel Repair Areas is the Dog-Leg or Door Repair. The MAXI EX configuration brings the technician eye level with the damage. The ergonomic position saves the tech from bending over or kneeling and prevents unnecessary daily stress on their body.Just WELD • PULL • TWIST! The Dent Fix Equipment MAXI DF-505EX220 is a 220 volt single phase steel dent pulling station that provides the technician with the power they need to shrink, pull rocker panels, hail damage, creases, dents in hard to access areas and all types of metal damage.
The efficiency of this tool increases the workers productivity while producing a cleaner, better repair. Taking the idea of a stud welder one step further, this versatile tool will:
1. Weld pins & keys
2. Weld a slide hammer directly to the panel
3. Weld a light pulling rod
4. Weld wiggle wire for even crease pulling
5. Weld a rod for leverage pulling
6. Shrink metalINCLUDES: EX Edition includes the MAXI 220V (DF-505/220V: Leverage Puller, Rods, Claws, Electrodes, and Consumables), 2 Accessories Shelves (DF-505AT), Padded Seat (DF-505MS), and an Extended Handle (DF-505PHXT, replaces standard handle that comes with the unit)!
The Dent Fix website and databases are all intended to be used as a GUIDE ONLY – it is important to remember that the auto body professional performing the repair is in a position to thoroughly inspect, diagnose and identify the methodology and their unique cost of the vehicle damage repair.
$2,180.36$2,295.00The MAXI EX – 220V
$2,180.36$2,295.00 -
Zinko ZATJ-250 25ton Air Hydraulic Truck Jack
Zinko ZATJ-250 25 Ton Air Hydraulic Truck Jack- All steel welded construction heavy duty units made for use on trucks, buses and agricultural machinery.
Units are lightweight yet are built for heavy duty use. All ZATJ series are fast, smooth, and efficient due to their all-steel wedge construction. Includes a flow control valve to prevent the ram from sudden falls. Quick lift mechanism allows a shortened ram lifting time without load. Specially processed air pump for low-noise operation. 2 large rubber-tire wheels and 3 position locking T-handle make this jack easy to fit into any space. Country of Origin: Japan$2,165.63$2,475.00Zinko ZATJ-250 25ton Air Hydraulic Truck Jack
$2,165.63$2,475.00 -
Zinko ZM-1500T 1.5ton Floor Type Transmission Jack Low Profile
Zinko ZM-1500T 1.5 Ton Floor Type Transmission Jack Low Profile- Designed specially for large-sized vehicles. Cylinder and attachement are oil-leak proof and light weight for ease of movement and service.
High efficiency of pump and plunger giving fast and smooth lifting of transmission in a simple operation by minimum labor. Saddle adjustable for forward and backward, or side tilt and sidewise movement. Valve for the hydraulic unit is independent enabling simple interchange after a long use.
Country of Origin: Taiwan$1,985.00$2,268.57Zinko ZM-1500T 1.5ton Floor Type Transmission Jack Low Profile
$1,985.00$2,268.57
