- “Zinko ZR-254 25ton 4" Stroke Ram” already exists in your wishlist
-
The Rail Saver, Ram, and Accessory Kit RS115-16AK
The Rail Saver RS115-16AK – Save a Rail, Save a Total Loss, Increase Your Bottom Line. Repairs Rails fast from the inside out. Don’t spend time cutting and drilling access holes only to weld them back together.
Includes 4 Ton Ram 5″ Push Ram. Repairs rails up to 27″ deep. The Rail Saver RSAK110 Accessory Kit – designed to increase access to repair areas and and provide greater repair finishing.
The kit comes complete with:
- (1) Universal mounting plate
- (1) 3″ x 2″ Threaded convex finishing pad
- (1) 7/8″ x 2″ x 3/8″ Threaded convex pad
- (1) 3/4″ x 1″ x 3/4″ Threaded convex pad
- (5) 6mm-1 x 8mm screws
- (1) Full face convex push pad.
New: Now includes Wall Bracket and Storage Case!
Reduce Cycle Times Repair More Cars Improved Repair Technique
1-1/2″ – 16 Threaded Ram Receiver 1½ X 3 surface pressure with 1 3/8 travel
$445.00$559.00The Rail Saver, Ram, and Accessory Kit RS115-16AK
$445.00$559.00 -
Tower Bearing, Outside Wheel Assembly
Tower Bearing, Outside Wheel Assembly
This bearing will work the Following Style Frame machines
- Chief Frame Machine
- Nos (new Old Stock)
- Free Shipping
Special NOTE:
NOTE: We are not a Distributor of Chief Equipment
NOS – was purchased from ex chief distributor and is limited to supply in stock.$138.75$159.56Tower Bearing, Outside Wheel Assembly
$138.75$159.56 -
Tower Ram Flange Washer 1″ Tooth Lock Type
Tower Ram Flange Washer 1″ Tooth Lock Type
- Compare to Chief part # 770147
- Work with tower flange bolt
$7.75$10.46Tower Ram Flange Washer 1″ Tooth Lock Type
$7.75$10.46 -
Tower Roller Bearing – Chief S-21
Tower Roller Bearing – 1-1/4
- Replacement for Chief S-21 Frame Machine ( For Serial # 0- 708) only
- Tower Roller Bearings ( Takes 4 bearings per tower) 1-1/4 Bearings
- compare to Chief Part # 602837
- Includes Dowel Pin
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Origin
$65.00$87.75Tower Roller Bearing – Chief S-21
$65.00$87.75 -
-
U.S. GENERAL42 in. x 22 in Toolbox for Aluminum Tool Kit
The U.S. GENERAL® Series 3 line of tool storage is fully modular to offer endless storage combinations to fit your needs. The 42 in. Roll Cab expands your storage capabilities with 16,700 cu. in. of space and a 2600 lb. weight capacity. It features 10 drawers with full-width drawer latches, pre-cut drawer liners, and a single integrated barrel lock. Durable, full-extension ball bearings and a tough powder-coated finish make this storage a perfect fit for your home garage or auto shop. Each Series 3 unit and accessory is rigorously tested in our state-of-the-art testing facility in the USA to meet the highest quality standards.
$699.00 -
Vac-N-Pull Vacuum Pulling Post
Vacuum pull post comes with a easy hook up for the Electro power built into the rachet pulling device (Electro Power sold Separately)
$1,800.00$1,975.00Vac-N-Pull Vacuum Pulling Post
$1,800.00$1,975.00 -
Washer – Behind Snap Ring- For 5″ Collar Roller Pin
Washer – Behind Snap Ring – For 5″ Collar Roller Pin
Retaining Ring is for chief Tower roller pin
- Works with Chief Roller pin for S21 & S21M, Goliath,
- Roller pin works with Signature & Signature Hybrid Frame Machine
- Replaces Chief Part# 707487
- Pin Is Grooved on both ends and has a 1.240 Diameter
- ( Wheel Sold separately)
- ( Pin Sold separately)
$4.10$5.54 -
Wheel Stands – Set of 2 – Chief Style
Wheel Stand – Set of 2, These wheel stands work with most all vehicles and are perfect for use with Frame repairs and has many other uses. You can compare these to chief part # 674507 Stands
- Compare to Chief Part # 674507
- Set of 2 wheel stands
- Universal Set Fits and works with most frame machines
- Universal Set Fits and works with most car and trucks
- Free Shipping
This is a Non-OEM, Replacement Part That Replaces Original
$406.25$548.44Wheel Stands – Set of 2 – Chief Style
$406.25$548.44 -
Winch Hoist 1760 LBS 110V w Extra long pendant – Collision and Automotive
14′ long control pendant, extra long remote pendant
- 1760 lbs Load Capacity: This garage lifting machine can easily lift small engines, transmissions, large workshop tools, or construction supplies. Capacity: 880 lbs (Single Line), 1760 lbs (Double Lines).
- Powerful Motor: The high-quality copper motor provides 1450W of strong power, which can withstand large forces without causing deformation of the electric winch. In addition, the large cooling fan can quickly cool the machine to avoid overheating. Therefore, this powerful motor ensures efficient operation and saves you more time and energy.
- Convenient to Install: It can be directly hanged on the ceiling using metal or solid wooden strips. Moreover, it is equipped with an emergency stop switch and electromagnetic braking system to avoid abnormal sliding.
- Remote Control: Wired remote control is achieved through the switch of a controller on the cable installed on the machine. The length of the extended cable is approximately 14ft, allowing you to operate within a secure distance.
- Multiple Uses: It is widely used in garages, factories, warehouses and families, as well as professionals and amateurs; Suitable for repairing ships, cars, lawn mowers, golf carts, home decor, engines, boulders, trees, etc.
- Lifting Load Capacity
- 1760 lbs / 800 kg
- Lifting Height (Single Cable)
- 40 ft / 12 m
- Lifting Speed (Single Cable)
- 33 ft/min
- Motor Power
- 1450W
- Voltage
- 110V
- Cable Size
- Φ5mm*L12m (19 Strands)
- Product Dimensions
- 16.1 x 5.9 x 7.1 inch / 410 x 150 x 180 mm
- Product Weight
- 40.23 lbs / 18.25 kg
$336.00$339.00 -
Winch Hoist 1760 LBS 110V with Remote – Collision and Automotive
This winch / Hoist has a hefty 1760LBS Load Capacity, hoist lifts small Truck beds, engines, transmissions. Lift includes Snatch block, 40′ of steel cable, weight is 880 lbs to 1,760 lbs lifting and you can double that when using the included snatch block. This is a 110v power unit and comes with a standard USA plug and is a remote controlled with 4-3/4 pendant switch. This is an awesome product when using as a bed lift or engine and transmission removal and be used with cherry picker or engine removal crane.
Specifications
- Winch / Electric Hoist lifting capacity 1760LBS
- Made with Cast Iron & Aluminum
- Voltage: 110V/60Hz
- Load Capacity: 880 lbs. (Single), 1760 lbs. (Double)
- Cable Length: 40 ft (Single), 20 ft (Double)
- Cable reel speed is 17′ per minute
- Remote Control Cord Length: 4′-3/4″
- 2′ Foot Power Cord
- 3/16′ Strong braided cable
- Item Size: 16-3/4″ x 5.-3/4″ x 10-3/4″
- weight 42 lbs.
- Designed for indoor and outdoor use
$306.00$339.00 -
Zinko 195112-H 3/8″ Hose Half Coupler
Zinko 195112-H 3/8″ Hose Half Coupler – Hose Half Fast Flow Male Coupler with 3/8″ NPTF Female Threads.
Fits all Zinko 3/8″ Industrial Rams, Pumps. Also compatible with all other brand name products.3/8″ NPTF Fast Flow Hose Half Coupler
Weight (lbs) :2.000000
Country of Origin: Taiwan
$32.61$37.27Zinko 195112-H 3/8″ Hose Half Coupler
$32.61$37.27
