-
Dentfix DF-595II Hammer Head Removal System
Dent Fix DF-595II Hammer Head Dent Removal System –
Replace your stud welder with the 110 volt DF-595ii HammerHead. Same great quality, same essential accessories that provides the technician with the means to higher productivity and better results. It’s like having sticky fingers and being able to pull dent with your hand.
110 Volt
1 year warranty.
60Lbs
Formerly Know as Shark 2 Dent remover (Name changed by Manufacturer)
Included Items:
Weld pin Tip (1), Washer Tip (1), Shrink Tip (1), Wiggle Wire Tip (1), Short Pull Rod (1), Slide Hammer With Rod and Weight (1), Leverage Rod (1), Ground Magnet (1), # Finger Claw, & 1Pound of Wiggle WireMade in China. 1 year warranty. Use with a 30 amp breaker.
$1,396.34$1,586.75Dentfix DF-595II Hammer Head Removal System
$1,396.34$1,586.75 -
Zinko ZSJ-50H 5ton Heavy Duty Service Jack
These heavy-duty service jacks are compact and designed for use on a wide range of automobiles. From sedans to light trucks and vans, the ZSJ Series is the professional’s choice for quick, efficient chassis lifting.
Special Features:
Overall construction from selected steel frame, full swivel rear caster wheels.
Extra long chassis reaches under low overhangs.
Ductile steel saddle for better grip and vehicle frame protection.
Overload safety valve
More Information
Capacity (Tons) :5
Minimum Height (in) :5.90
Hydraulic Lift (in) :16.14
Maximum Heights (in) :22.04
Chassis Length (in) :55.70
Chassis Width (in) :14.37
Height of Frame (in) :7.87
Weight (lbs) :241.000000$1,400.70$1,600.80Zinko ZSJ-50H 5ton Heavy Duty Service Jack
$1,400.70$1,600.80 -
Body Buggy Chassis Roller – 4′
Body Buggy Chassis Roller – 4′ – Quick and safe method to transport disabled vehicles on and off a rack and around the shop or into a paint booth. MADE IN THE USA!
After a simple five minute installation, the unit becomes “part of the vehicle”, negating the need to employ any unstable or dangerous lift points. The included spacer kit allows for the use of original fasteners, alleviating the need for any additional fastener inventory. When installed, the vehicle is easily rolled onto a frame rack, into a paint booth or to storage, out of the way of production. The device can be installed on the front or rear of most any vehicle using the cradle or sub-frame mounting points and hardware. The Body Buggy has a max weight rating of 4,500 lbs and includes a 5 year warranty.
INCLUDED: Main Beam (4 Foot), Wheel Assemblies, Sliding Lock Collars, Mounting Brackets (2 Pairs of different heights), Hitch Pins & Clips, Fitment Pin Spacer, Storage Crate, and 10 pc Spacer Kit.
Free up Rack Space with the patented Body Buggy DF-BB104
$1,407.69$1,599.65Body Buggy Chassis Roller – 4′
$1,407.69$1,599.65 -
Mo-Clamp 5010 #1 Tool Board
MO-Clamp 5010 #1 Tool Board with Tools Including:
- #0100 B Clamp
- #0200 C Clamp
- #0300 JR Clamp
- #0400 W Clamp
- 2- #1200 Twin Pull
- #1300 Sill Hook
- #1800 Track Hook
- #5011 Tool Board with Hooks
#5011 Toolboard Dimensions: 2’x2′ Tools are Heat Treated Steel and Made in the U.S.A
$1,418.79$2,127.92Mo-Clamp 5010 #1 Tool Board
$1,418.79$2,127.92 -
Replacement Chief Style Frame Anchoring Stands – Generation 4
Replacement Chief Style Frame Anchoring Stand – Single: Precision and Versatility Redefined
Upgrade your frame repair capabilities with our high-performance Replacement Chief Style Frame Anchoring Stand – Single, designed to deliver precision and reliability on par with Chief 4th Generation clamps 702082 & CK110017. This stand is compatible with a wide range of frame machines, including S21, S21M, EZ liner, Classic, Impulse, Goliath, Titan, and more, ensuring seamless integration into your setup.
Key Features:
- Unrivaled Performance: Our Replacement Chief Style Frame Anchoring Stand – Single is engineered to meet the highest standards of frame repair. Comparable to Chief 4th Generation clamps 702082 & CK110017, this stand provides exceptional gripping power and reliable holding, ensuring precise and efficient frame repairs.
- Versatile Compatibility: Enjoy seamless compatibility with various Chief Frame Machine models, including S-21 & S-21M, EZ-Liner II, Classic & EZ 25, Goliath, Impulse, Impulse E-VHT, Stream Liner, Excelerator, Chisum, Freedom, Signature, and Proline Frame systems. Embrace the flexibility to work with multiple frame machines.
- Seamless Replacement: Our Replacement Chief Style Frame Anchoring Stand – Single efficiently replaces Chief p/n 702082 & CK110017, ensuring consistent performance and effortless integration into your existing setup.
- Comprehensive Single Package: The single anchoring stand assembly includes a new bolts kit, one 5 1/4 inch Metric bolt, and one Metric fastener bar, providing you with all the necessary components for a hassle-free installation.
- Durable Construction: With a powder coat finish, our stand boasts excellent resistance to wear and tear, ensuring longevity and optimal performance in demanding repair applications.
- Non-OEM Aftermarket Excellence: As a non-OEM aftermarket replacement part, our stand is engineered to deliver the same level of quality and performance as the original Chief 4th Generation clamps 702082 & CK110017, making it a reliable and cost-effective choice for your frame repair needs.
- Convenient Free Shipping: We value your satisfaction and convenience, offering free shipping on this product to ensure a seamless and timely delivery to your desired location.
Experience Precision and Versatility Redefined!
Elevate your frame repair capabilities with our Replacement Chief Style Frame Anchoring Stand – Single and experience the excellence of Chief 4th Generation clamps 702082 & CK110017. With unmatched gripping power and seamless compatibility, this stand is your ticket to flawless frame repairs.
Unlock the potential of our Replacement Chief Style Frame Anchoring Stand – Single and take your frame repairs to a new level of precision and efficiency!
- Single Anchoring stand assembly
- Compare To and Replaces Chief p/n 702082 & CK110017
- Works on Chief S-21 & S-21M
- Works on Chief EZ-Liner II, Classic & EZ 25
- Works on Chief Goliath, Impulse, Impulse E-VHT
- Works on Chief Stream Liner, Excelerator
- Works on Chisum, Freedom, Signature, Proline Frame system
- Includes New Bolts Kit
- Includes (1) 5 1/4 inch Metric Bolts
- Includes (1) Metric Fastener Bars
- Powder Coat Finish
- Includes Free Shipping
- Shipping Weight 90 lbs
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
$1,440.75$1,945.01Replacement Chief Style Frame Anchoring Stands – Generation 4
$1,440.75$1,945.01 -
Body Buggy Chassis Roller – 5′
Body Buggy Chassis Roller – 5′ – Quick and safe method to transport disabled vehicles on and off a rack and around the shop or into a paint booth. MADE IN THE USA!
After a simple five minute installation, the unit becomes “part of the vehicle”, negating the need to employ any unstable or dangerous lift points. The included spacer kit allows for the use of original fasteners, alleviating the need for any additional fastener inventory. When installed, the vehicle is easily rolled onto a frame rack, into a paint booth or to storage, out of the way of production. The device can be installed on the front or rear of most any vehicle using the cradle or sub-frame mounting points and hardware. The Body Buggy has a max weight rating of 4,500 lbs and includes a 5 year warranty.
INCLUDED: Main Beam (5 Foot), Wheel Assemblies, Sliding Lock Collars, Mounting Brackets (2 Pairs of different heights), Hitch Pins & Clips, Fitment Pin Spacer, Storage Crate, and 10 pc Spacer Kit.
Free up Rack Space with the patented Body Buggy DF-BB105
$1,501.86$1,706.65Body Buggy Chassis Roller – 5′
$1,501.86$1,706.65 -
Zinko ZRH-306 30ton 6.13″ Stroke Hollow Ram
Overview
These General Purpose Hollow type Cylinders of our store are designed for use in a variety of applications where lifting, pushing, bending or holding may be required.Ideal for use in shop, agricultural, automotive/truck service, and construction maintenance.
Special Features:
High-strength alloy steel construction.
Chrome-plated piston rods resist wear and corrosion.
Special bearing design helps prevent galling for long life and trouble-free performance.
Polyurethane seals and wipers to reduce contamination, extending cylinder life.
Hardened saddles keep top bearing and plunger from jamming.
Saddle grooves help prevent slipping.
Heavy-duty spring enables consistent fast plunger retraction.
All models come with fast-flow quick-connection coupler and dust cap.
May be used in any position.
Hollow plunger design allows for both pull and push forces.
More Information
Capacity (Tons) :30
Stroke (in) :6.10
Oil Capacity (in³) :44.06
Cylinder Effective Area (in²) :7.22
Minimum Height (in) :13.00
Maximum Heights (in) :19.10
Outside Diameter (in) :4.50
Weight (lbs) ;45.000000$1,503.88$1,718.71Zinko ZRH-306 30ton 6.13″ Stroke Hollow Ram
$1,503.88$1,718.71 -
Zinko ZJJ-1513 15ton 5″ Stroke Journal Mechanical Jack
15 Ton 4.92″ Stroke Journal Mechcanical Jack- Beveled gear construction combines the precision forging pinion to provide shifted tooth form, strong and excellent interlocking.
Special Features:
Unique construction bearing is made for longer life and smooth horizontal advance.
Rigidly designed screw made by chrome -molybdenum steel to withstand excessive load.
Beveled ring gear interlocks with the precision forged pinion to provide shifted tooth form for strong and excellent interlocking.
Special ratchet handle interior design with nickel-chrome wheel and plunger enables strong rotation for an easy , smooth operation.
Buttress threads will not creep down under load.
Operable vertically or laterally (lateral movement requires optional traversing bed).Country of Origin: Japan
More Information
Capacity (Tons) :15
Stroke (in) :4.92
Operation Force (Ft. / lb.) :310
Minimum Height (in) :10.04
Maximum Heights (in) :14.96
Saddle Diameter (in) :2.48
Base Diameter (in) :3.03
Weight (lbs) :40.000000$1,505.23$1,720.26Zinko ZJJ-1513 15ton 5″ Stroke Journal Mechanical Jack
$1,505.23$1,720.26 -
Mo-Clamp 4028 BMW Hold Down
MO-Clamp 4028 BMW Hold Down – For holding BMW vehicles with oblong or round jack tube holes.
Overall Length: 14″ (356 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #5249 Nut, Bolt & Washer, #402801 Rocker Pin Heat Treated Steel. Made in the U.S.A.
$1,515.76$2,273.36Mo-Clamp 4028 BMW Hold Down
$1,515.76$2,273.36 -
Zinko ZASJ-50M 5ton Air Hydraulic Service Jack
Easy to operate push-button floor jack with an air pump. Ideal for use in tight spaces including on trucks, automotive and agricultural equipment.
Special Features:
The jack can be operated either manually or pneumatically.
Overall construction of selected steel frame, full swivel rear caster wheels and large lifting saddle provide easy positioning and enable these jacks to safely lift to their rated capacities.
Quick lift foot pump can easily lift the jack saddle to the loading point.
Pneumatic operation requires air pressure ranges from 90 to 140 psi operated by a push button for quick lift.
Push button control unit can be easily removed from the handle enabling operator to view the load from various angles.
Large release knob provides metered release control.
Extra long low chassis reaches under low overhangs for easy load positioning.Country of Origin: Japan
More Information
Capacity (Tons) :5
Minimum Height (in) :5.90
Hydraulic Lift (in) :16.14
Maximum Heights (in) :22.04
Chassis Length (in) :55.70
Chassis Width (in) :15.15
Height of Frame (in) :7.87
Operating (psi) :116-145
Weight (lbs) :280.000000$1,531.95$1,750.80Zinko ZASJ-50M 5ton Air Hydraulic Service Jack
$1,531.95$1,750.80 -
Zinko ZRM-100 100ton 0.63″ Stroke Super Low Cylinder
ZRM Series Single-Acting Low Height Cylinders. These low height cylinders have a flat and compact design for use where other cylinders will not fit. Designed for use where other cylinders will not fit. All models are designed for use in any position and feature base mounting holes for easy attachment to almost any fixture.
Special Features:
Light weight and rugged.
Built for power & mobility.
Designed for use in all positions.
Come with a 3/8″ NPT fast flow coupler.
Mounting holes allow easy mounting on to almost any fixture.
Grooved plunger ends do not require saddle.Country of Origin: Taiwan
More Information
Capacity (Tons) :100
Stroke (in) :0.63
Oil Capacity (in³) :12.39
Cylinder Effective Area (in²) :19.63
Minimum Height (in) :3.34
Maximum Heights (in) :3.97
Outside Diameter (in) :7.00 x 6.00
Weight (lbs) :34.000000$1,546.14$1,767.01Zinko ZRM-100 100ton 0.63″ Stroke Super Low Cylinder
$1,546.14$1,767.01 -
OTC 4022 Air/ Hydraulic Pump
OTC 4022 Air/ Hydraulic Pump -Air / Hydraulic Pump With shop air as the energy source, this pump has the power and oil capacity (80 cu. in. usable oil) to drive even the large 55-ton rams. It’s an ideal all-around power source for dozens of body, frame, and alignment applications. It can be used with a variety of rams, presses, and hydraulic pullers operating at up to 10,000 PSI. An internal relief valve protects the hydraulic components regardless of hydraulic pressure. In addition, a two-stage release mechanism gives fast or metered ram return while reducing hydraulic shock. The 4022 is equipped with a 2-gal. reservoir. This pump requires 9 cfm at 100 PSI air pressure at the pump. No. 4022 Air/ hydraulic pump with a 2-gallon (442 cu. in.) plastic reservoir. Performance @ 100 PSI Hydraulic Pressure* Oil Delivery 0 PSI…………………………59 cu. in./min. 5,000 PSI…………………..30 cu. in./min. 10,000 PSI…………………..4 cu. in./min. * Oil delivery based on 20 cfm air supply at the pump. Special order item only, please call customer service.
$1,576.19$1,812.61OTC 4022 Air/ Hydraulic Pump
$1,576.19$1,812.61
