-
Mo-Clamp 9702 Small Round Wedge for Dyna-Mo
MO-Clamp 9702 Small Round Wedge for Dyna-Mo
$41.03$52.10Mo-Clamp 9702 Small Round Wedge for Dyna-Mo
$41.03$52.10 -
Mo-Clamp 5802 Jumbo G Clamp
MO-Clamp 5802 Jumbo G Clamp – Has a throat opening of 7″ to get over, around and behind the damage. Multiple holes allow for various angle pulls. Includes swivel pad. Optional (sold separately) #4059 5/8″ Screw Pin Shackle adds even more versatility.
Overall Length: 15-1/2″ (394mm) Overall Width: 9-1/2″ (241mm) Capacity: 5 tons (4,536kg) Replacement Parts: #580204 Main Shaft, #580209 Swivel Pad Heat Treated Steel. Made in the U.S.A.
$606.41$909.50Mo-Clamp 5802 Jumbo G Clamp
$606.41$909.50 -
-
Mo-Clamp 5800 G Clamp
MO-Clamp 5800 G Clamp – Easier pulling with multiple pulling angles. Has a throat opening of 4 inches allowing plenty of room to get over, around and behind the damage. And the movable shackle means more versatility. Made of heat-treated alloy steel for extra strength. Includes swivel pad.
Overall Length: 10-1/2″ (267mm) Overall Width: 6″ (152mm) Capacity: 4 tons (3,629kg) Replacement Parts: #4055 7/16″ Screw Pin Shackle, #520034 Main Shaft, #840065 Swivel Pad Heat Treated Steel. Made in the U.S.A.
$304.13$456.14Mo-Clamp 5800 G Clamp
$304.13$456.14 -
Mo-Clamp 4152 Two Single Claws
MO-Clamp 4152 Two Single Claws – Versatile combination for quick hook-ups and multiple pulls. 18-inches of 3/8″ chain included.
Overall Length: 25″ (635 mm) Working Load Limit: 6,600 lbs Working Load Limit: Refers to the maximum load (rated capability) in pounds that shall be applied in direct tension to a straight length of chain or attachment. NEVER EXCEED THE WORKING LOAD LIMIT of chains or attachments, even when the item is new and the load limit is uniformly applied. Replacement Parts: #5220 Clevis Pin & Rue Clip Heat Treated Steel. Made in the U.S.A.
$132.03$193.45Mo-Clamp 4152 Two Single Claws
$132.03$193.45 -
Mo-Clamp 5900 Mini Bite
MO-Clamp 5900 Mini Bite – The reversible Mini-Bite Clamp is designed to get around lips and corners for strong pulls and to pull narrow seams and lips. Cross-hatch tooth design assures a firm grip. Designed for use with a 3/8″ chain.
Overall Length: 6″ (152mm) Overall Width: 1-1/4″ (38mm) Gripping Surface: 1-1/4″ wide (45mm), 1″ deep (25mm) Capacity: 3 tons (2,722kg) Replacement Parts: #520046 Bolt, #5226 Nut, Bolt & Washer, #000120 Mini Pull Ring Heat Treated Steel. Made in the U.S.A.
$138.84$203.43Mo-Clamp 5900 Mini Bite
$138.84$203.43 -
Mo-Clamp 5252 Nut Bolt Spring Washer 5/8″ X 4-1/2″ for 0670
MO-Clamp 5252 Nut Bolt Spring Washer 5/8″ x 4-1/2″ for 0670
$21.13$26.83 -
Mo-Clamp 4049 Frame Wrench
MO-Clamp 4049 Frame Wrench – Allows easy access to the bends and waves resulting from frame straightening. Helps in achieving the “pre-accident condition” look. Eliminates unsightly hammer marks of the frame. Designed for c-frame construction. Two different angles to access the difficult underside of vehicles.
Overall Length: 15″ (381 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$95.81$130.36Mo-Clamp 4049 Frame Wrench
$95.81$130.36 -
Mo-Clamp 4025 Frame Rack Jaws
MO-Clamp 4025 Frame Rack Jaws – Clamp has recessed pockets to hold bolts stationary for easy tightening.
Gripping Surface: 4″ wide (102 mm), 1/2 ” deep (19 mm) Overall Length: 5″ (127 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #4045 Nut, Bolt & Washer, #4046 Spring Heat Treated Steel. Made in the U.S.A.
$216.05$316.55Mo-Clamp 4025 Frame Rack Jaws
$216.05$316.55 -
Mo-Clamp 1000 Handy Hook
MO-Clamp 1000 Handy Hook – A great time saver with Mo-Clamp’s easy hook-up system. No chain is too long and no hooks are needed on the chain. Alloy heat-treated steel. Pulling slots can be used with #0900 Hole Pull Adapters. Designed for use with 3/8″ chain.
Overall Length: 6″ (165 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$89.03$113.05Mo-Clamp 1000 Handy Hook
$89.03$113.05 -
Mo-Clamp 4030 3-Way Pull Clamp
MO-Clamp 4030 3-Way Pull Clamp – Clamp has recessed pockets to hold bolts stationary for easy tightening. Includes #4043 Oval Loop.
Gripping Surface: 4″ wide (102 mm), 1/2 ” deep (19 mm) Overall Length: 8″ (203 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #4045 Nut, Bolt & Washer, #4046 Spring Heat Treated Steel. Made in the U.S.A.
$237.35$347.76Mo-Clamp 4030 3-Way Pull Clamp
$237.35$347.76 -
Mo-Clamp 0670 Baby Box Clamp
MO-Clamp 0670 Baby Box Clamp – Self-tightening. Great for single-lip flanges and inside frame horns. Original wedge; cross- hatch tooth design; spring-loaded for easy opening. Throat clearance of 1½” high (38 mm), 1¼” deep (32 mm).
Gripping Surface: 1¾” wide (45 mm), 1″ deep (25 mm) Overall Length: 9½” (241 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #9701 Wedge, #5252 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
$222.73$326.35Mo-Clamp 0670 Baby Box Clamp
$222.73$326.35
