-
Zinko ZNP-8 8ton Steel Base Jack
Zinko ZNP-8 8 Ton Steel Base Jack- A Powerful heavy-duty jack that is ideal for use in the automotive, machinery and construction industry.
Welded steel construction throughout – reduces metal fatigue allowing for a longer use life. 5/8″ thick steel base design for special application. Can be used in upright, angle and horizontal position. Casing, cylinder and base are joined by electric welding for greater strength and are leak proof. Needle valve allows for controlled lowering of the ram.
Country of Origin: Japan$85.25$97.43Zinko ZNP-8 8ton Steel Base Jack
$85.25$97.43 -
Zinko ZPE-35RH-1M Pump 1/3hp Electric 100V 60 Cubicinch Oil Tank
Zinko ZPE-35RH-1M Pump1/3 Hp Electric 100V 60 Cubic Inch Oil Tank- Two way manual screw type standard valve. Ideal for general industrial electric installations, the construction industry, ship yards, automotive service shops, material handling situations, laboratories and educational institutions. Capable of up to 10,000 psi (70 Mpa) output| Powered by a 1/3 HP, 2000 rpm commutator motor.
Works with standard 110 V AC current. Comes with remote pendant switch, two way manual release valve and shoulder strap for easy handling and operation. Sixty cubic inch oil reservoir allows pump to be used with a wide range of hydraulic components. Super light weight, compact, and powerful 1/3 HP motor. Easily transported to any job site. The fully sealed reservoir allows for operation in any position. With a fully enclosed motor and pump, it is ideal for outside use. Optional battery-operated 12V & 24V DC models are available upon request. Optional solenoid 2 way and 4 way manual control valves also available upon request
Country of Origin: Japan$1,746.63$1,995.00Zinko ZPE-35RH-1M Pump 1/3hp Electric 100V 60 Cubicinch Oil Tank
$1,746.63$1,995.00 -
Zinko ZPJ-850C 0.93 Ton Panta Graph Jack
This handy little specialized jack has a minimun lowered height of 4.76″. It is perfect for lifting of passenger car frames to replace a tire / wheels or to install and take off snow chains. This very satile automotive jack can be used for a wide variety of uses. Lightweight, compact and very easy to operate.
Special Features:
Rapidly raises a vehicle with minimal effort.
Easy to operate.
Lightweight and compact.
Low profile with long stroke.
Rugged steel base to prevent leaking
High strength aluminum cap saddle to receive vehicle panel rail.
Special coating on the ram and piston plunger to provide extra corrosion protection.
More Information
Capacity (Tons) :0.93
Minimum Height (in) :4.76
Hydraulic Lift (in) :10.24
Maximum Heights (in) :15.00
Chassis Length (in) :15.35
Chassis Width (in) :4.60
Weight (lbs) :18.000000$280.23$312.75Zinko ZPJ-850C 0.93 Ton Panta Graph Jack
$280.23$312.75 -
Zinko ZPK-04 4ton Portable Hydraulic Body Repair Kit
Overview
For collision repair, industrial and construction applications where convenience of hydraulic power can be utilized for pushingm, pulling, spreading, clamping and lifting operations
Special Features:
The collision repair kits snap-together components make for quick set-ups and come in 4-, 10- and 20-ton versions.
Designed for quick and easy use where portable hydraulic power is needed.
Built-in overload system assures maximum protection of operator and equipment.
High strength heavy wall tubing reinforces parts and extends the life of the tools.
Choose either single-speed or two speed pumps for almost any applications.
All components come in an easy-to-handle carrying case for convenience.
More Information
Capacity (Tons) 41. Hydraulic Pump (ZHP-18: single speed)
2. Hose & 1/4″ Coupler (9210104)
3. 4 Ton Ram 5″ Stroke (ZAR-045SP)
4. Spreader Ram
5. Extension Tubes: (4″, 8″, 12″, 16″)
6. Male Connector
Kits Includes:
7. Flat Base8. 90° “V” Base
9. Wedge Head
10. Spreader Plunger Toe
11. Spreader Ram Toe
12. 2-3/4″ Flex Head
13. Serrated Saddle
14. Carrying Case
Weight (lbs) 43.000000
$329.87$346.50Zinko ZPK-04 4ton Portable Hydraulic Body Repair Kit
$329.87$346.50 -
Zinko ZPK-10 10ton Portable Hydraulic Body Repair Kit
For collision repair, industrial and construction applications where convenience of hydraulic power can be utilized for pushingm, pulling, spreading, clamping and lifting operations.
Special Features:
The collision repair kits snap-together components make for quick set-ups and come in 4-, 10- and 20-ton versions.
Designed for quick and easy use where portable hydraulic power is needed.
Built-in overload system assures maximum protection of operator and equipment.
High strength heavy wall tubing reinforces parts and extends the life of the tools.
Choose either single-speed or two speed pumps for almost any applications.
All components come in an easy-to-handle carrying case for convenience.Country of Origin: Taiwan
More Information
Capacity (Tons) 10
Kits Includes:
1. Hydraulic Pump (ZHP-28: single speed)2. Hose & 1/4″ Coupler (9210104L)
3. 10 Ton Ram 6″ Stroke (ZAR-106SP)
4. Spreader Ram
5. Extension Tubes: (5″, 10″, 14″, 19″)
6. Male Connector
7. Flat Base
Kits Includes:8. 90° “V” Base
9. Wedge Head
10. Spreader Plunger Toe
11. Spreader Ram Toe
12. 2-3/4″ Flex Head
13. Serrated Saddle
14. Carrying Case (with wheels)
Weight (lbs) :82.000000
$631.09$721.25Zinko ZPK-10 10ton Portable Hydraulic Body Repair Kit
$631.09$721.25 -
Zinko ZPR-056 5 Ton 6″ Hydraulic Pulling Jack
Zinko ZPR-056 5 Ton 6″ Hydraulic Pulling Jack- This hydraulic pulling jack is perfect for drawing heavy objects, positioning structures, or lifting heavy loads. It is designed for use with single acting pumps like our ZHP series hand pumps, ZAP series air over hydraulic pumps, and some of the ZPE series electric hydraulic pumps.
High-strength alloy steel construction Chrome-plated piston rods resist wear and corrosion Can be used in any position Easy to handle- weighs only 14 lbs Up to 5 Tons of pulling force Factory tested over rated capacity Country of Origin: Taiwan$303.50$346.86Zinko ZPR-056 5 Ton 6″ Hydraulic Pulling Jack
$303.50$346.86 -
Zinko ZPR-106 10ton 6″ Hydraulic Pulling Jack
Zinko ZPR-106 10 Ton 6″ Hydraulic Pulling Jack- This hydraulic pulling jack is perfect for drawing heavy objects, positioning structures, or lifting heavy loads. It is designed for use with single acting pumps like our ZHP series hand pumps, ZAP series air over hydraulic pumps, and some of the ZPE series electric hydraulic pumps.
High-strength alloy steel construction Chrome-plated piston rods resist wear and corrosion Can be used in any position Up to 10 Tons of pulling force Factory tested over rated capacity Country of Origin: Taiwan
$340.71$389.38Zinko ZPR-106 10ton 6″ Hydraulic Pulling Jack
$340.71$389.38 -
Zinko ZR-059 5 Ton 9″ Stroke Ram
Overview
The 5 ton 9″ stroke hydraulic cylinders of our store are designed for use in a variety of applications where lifting, pushing, bending or holding may be required. Ideal for use in shop, agricultural, automotive/truck service, and construction maintenance.
Special Features:Designed with base mounting holes (4/16-18 UNC) for easy mounting on almost any fixture.
Can be used in any positions.
Harden saddles keep top bearing and plunger from jamming while the saddle grooves help prevent slipping.
Baked enamel finish for outstanding corrosion prevention.
Threaded collar and internal threads withstand full loads for maximum flexibility in fixturing.
Come with a 3/8″ NPT fast flow quick connection coupler and dust cap.
Collar Plunger thread and base mounting hole provide for easy fixture.
Optional adapters make it easy and cost efficient to convert our cylinders from snap-type to threaded-type for your application.
With appropriated accessories, These Industrial Quality Cylinders can be paired with either hand pumps, air pumps, or electric pumps.
More Information
Capacity (Tons) :5
Stroke (in) :9.13
Oil Capacity (in³) :9.21
Cylinder Effective Area (in²) :1
Minimum Height (in) :12.72
Maximum Heights (in) :21.85
Outside Diameter (in) :1.50
Weight (lbs) :8.000000Min Ht. 12.75″
$528.55$604.06Zinko ZR-059 5 Ton 9″ Stroke Ram
$528.55$604.06 -
Zinko ZR-1010 10 Ton 10″ Stroke Ram
Zinko ZR-1010 10 Ton 10″ Stroke Ram- Design for use ina variety of applications where lifting, pushing, bending or holding may be required.
High-strength alloy steel construction. Chrome-plated piston rods resist wear and corrosion. Special bearing design helps prevent galling for long life and trouble-free performance. Polyurethane seals and wipers to reduce contamination, extending cylinder life. Hardened saddles keep top bearing and plunger from jamming. Saddle grooves help prevent slipping. Heavy-duty spring enables consistent fast plunger retraction. All models come with fast-flow quick-connection coupler and dust cap. May be used in any position. Country of Origin: TaiwanMin Ht. 13.89″javascript:void(0);
$529.45$605.09Zinko ZR-1010 10 Ton 10″ Stroke Ram
$529.45$605.09 -
Zinko ZR-102 10 Ton 2″ Stroke Ram
Zinko ZR-102 10 Ton 2″ Stroke Ram- Multiple application for many different fields that require single-acting ram job service.
A wide variety of rams include short, push, spreader and snap-set type. Chrome-plated piston rods for long life. Polyurethane seals provides high cycle life. Easy to mount and “quick-connect” couplers on all rams for fast set up. Heavy duty return springs provide consistent performance. Country of Origin: TaiwanMin Ht. 4.78″
$314.20$359.09Zinko ZR-102 10 Ton 2″ Stroke Ram
$314.20$359.09 -
Zinko ZR-104 10 Ton 4″ Stroke Ram
Overview
The 10 ton 4″ stroke hydraulic cylinders of our store are designed for use in a variety of applications where lifting, pushing, bending or holding may be required. Ideal for use in shop, agricultural, automotive/truck service, and construction maintenance.
Special Features:
Designed with base mounting holes (4/16-18 UNC) for easy mounting on almost any fixture.
Can be used in any positions.
Harden saddles keep top bearing and plunger from jamming while the saddle grooves help prevent slipping.
Baked enamel finish for outstanding corrosion prevention.
Threaded collar and internal threads withstand full loads for maximum flexibility in fixturing.
Come with a 3/8″ NPT fast flow quick connection coupler and dust cap.
Collar Plunger thread and base mounting hole provide for easy fixture.
Optional adapters make it easy and cost efficient to convert our cylinders from snap-type to threaded-type for your application.
With appropriated accessories, These Industrial Quality Cylinders can be paired with either hand pumps, air pumps, or electric pumps.
More Information
Capacity (Tons) :10
Stroke (in) :4.13
Oil Capacity (in³) :9.27
Cylinder Effective Area (in²) :2.24
Minimum Height (in) :6.73
Maximum Heights (in) :10.86
Outside Diameter (in) :2.24
Weight (lbs) :8.000000Min Ht. :6.75″
$349.75$399.71Zinko ZR-104 10 Ton 4″ Stroke Ram
$349.75$399.71 -
Zinko ZR-106 10 ton 6″ Stroke Ram
Overview
The 10 ton 6″ stroke hydraulic cylinders of our store are designed for use in a variety of applications where lifting, pushing, bending or holding may be required. Ideal for use in shop, agricultural, automotive/truck service, and construction maintenance.
Special Features:Designed with base mounting holes (4/16-18 UNC) for easy mounting on almost any fixture.
Can be used in any positions.
Harden saddles keep top bearing and plunger from jamming while the saddle grooves help prevent slipping.
Baked enamel finish for outstanding corrosion prevention.
Threaded collar and internal threads withstand full loads for maximum flexibility in fixturing.
Come with a 3/8″ NPT fast flow quick connection coupler and dust cap.
Collar Plunger thread and base mounting hole provide for easy fixture.
Optional adapters make it easy and cost efficient to convert our cylinders from snap-type to threaded-type for your application.
With appropriated accessories, These Industrial Quality Cylinders can be paired with either hand pumps, air pumps, or electric pumps
More Information
Capacity (Tons) :10
Stroke (in) :6.14
Oil Capacity (in³) :13.79
Cylinder Effective Area (in²) :2.24
Minimum Height (in) :9.72
Maximum Heights (in) :15.86
Outside Diameter (in) :2.24
Weight (lbs) :11.000000$386.63$441.86Zinko ZR-106 10 ton 6″ Stroke Ram
$386.63$441.86
