-
DentFix DF-EZN1 EZ Nitrogen Plastic Welder – Bottle
DentFix DF-EZN1 EZ Nitrogen Plastic Welder – The DF-EZN1 EZ NITRO PLASTIC WELDER is unique in its use of proprietary Flow Adjust Switch Technology (FAST). The FAST system makes the DF-EZN1 the easiest nitrogen welder to learn and use. It simplifies nitrogen welding and eliminates flow adjustments by the user. This significantly reduces the time to set up the welder and gets the work done FAST.
Equipped with two welders, the DF-EZN1 EZ NITRO incorporates both a nitrogen welding torch and an airless welding torch. The nitrogen torch is air cooled. It is essential to establish and maintain air flow before turning the welder on, and air flow must be maintained until the nitrogen torch cools down. (Usually 10 minutes to cool down after powering down)
The unit comes with plastic rod in various types and sizes to enable the user to weld different types of plastic and different types of damages. Also included is a roll of aluminum tape to hold parts together when welding. The hand seaming tool help shapes, flatten, and insure that repaired flanges and tabs are the correct thickness.
The cart is equipped with a tank regulator, tank brackets, tank chain, a heat gun holster, and a power strip for powering other tools.
$2,979.32$3,385.59DentFix DF-EZN1 EZ Nitrogen Plastic Welder – Bottle
$2,979.32$3,385.59 -
Zinko ZJJ-3525 35ton 10″ Stroke Journal Mechanical Jack
inko ZJJ-3525 35 Ton 10″ Stroke Journal Mechcanical Jack- Beveled ring gear interlocks with the precision forged pinion to provide shifted tooth actuation. Extremely strong, precise interlocking gears.
Unique ratcheting handle shaft design with nickel-chrome constructed wheel and plunger enables user to obtain powerful worry free pinion rotation, allowing for an easy and smooth operation. Buttress threads will not creep down under load. Operable vertically or laterally (lateral movement requires optional traversing bed). Unique ring gear bearing allows extremely long life and smooth rotational advance. Rigid lifting screw is made from Chrome-molybdenum steel to withstand excessive loads.
Made in Japan.$3,009.84$3,439.82Zinko ZJJ-3525 35ton 10″ Stroke Journal Mechanical Jack
$3,009.84$3,439.82 -
Zinko ZRDH-606 60ton 6″ Stroke Double Acting Hollow Plunger Cylinder
Zinko ZRDH-606 60 Ton 6″ Stroke Double Acting Hollow Plunger Cylinder- Design for use in a variety of applications where lifing, pushing, bending or holding may be required.
Double acting design for greater speed and positive control. Interfaces with automated operations. 3/8″ fast flow couplers included on all models. Threaded collar along with hollow plunger design allows for both pull and push forces. Baked enamel finish for increased corrosion control. Removable hardened saddles protect plunger during lifting and pressing. Built in safety valve prevents accidental over-pressurization. Plunger wiper seals reduce contamination, extending cylinder life.Country of Origin: Taiwan
$3,169.69$3,622.50Zinko ZRDH-606 60ton 6″ Stroke Double Acting Hollow Plunger Cylinder
$3,169.69$3,622.50 -
Zinko ZHC-15V 15/30ton Toe Jack
Overview
Use our safe, dependable toe jacks to safely lift a heavy load in a low clearance situation. Super low height (lowest in the industry) toe jacks ease operation under the most difficult situations. These are the best choice for lifting heavy machinery and cargo, especially when installing industrial machinery, relocating shipyard equipment, or during bridge and plant construction.
Special Features:
360° turn lever socket tor operation at any direction
Low toe height is ideal tor use where clearance is tight
Designed tor tine adjustments. Ideal tor delicate work such as installation of precision machines
Welded steel construction prevents oil leakage and a special heat treatment that reduces metal fatigue
More Information
Capacity (Tons) :15
Minimum Height – Toe (in) :1.26
Minimum Height – Head (in) :13.58
Maximum Height – Toe (in) :6.77
Maximum Height – Head (in) :19.09
Ram Lift (in) :5.51
Toe Area (in) :4.33 x 2.36
Base Area (in) :12.63 x 10.15
Weight (lbs) :117.000000$3,317.79$3,791.76Zinko ZHC-15V 15/30ton Toe Jack
$3,317.79$3,791.76 -
Replacement Chief Frame Machine Tall Anchoring Stands
Replacement Chief Frame Machine Tall Anchoring Stands: Elevate Your Vehicle Repair Capabilities
Upgrade your existing Chief Frame Machine with our cutting-edge Replacement Tall Anchoring Stands, designed to enhance your vehicle repair operations with precision and efficiency. These stands extend the height, providing you with an additional 4 inches, allowing easy access to high-lift vehicles and facilitating seamless repairs.
Key Features:
- Height Extension: Our Replacement Chief Frame Machine Tall Anchoring Stands effectively elevate the height of your existing stands, empowering you to handle high lift vehicles with ease. Say goodbye to accessibility challenges and welcome a new level of versatility to your repair process.
- Superior Compatibility: Engineered as a perfect replacement for Chief part # 702066, our stands are fully compatible with a range of Chief Frame Machine models, including S-21 & S-21M, EZ-Liner II, Classic & EZ 25, Goliath, Impulse, Impulse E-VHT, Stream Liner, Excelerator, Tital, Fuzion, Signature, Freedom, Grabber ProLiner, Maxima, and Chisum.
- Non-OEM Aftermarket Solution: Our Replacement Chief Frame Machine Tall Anchoring Stands are expertly crafted as a non-OEM aftermarket alternative, guaranteeing the same high-quality performance as the original part. This makes it a reliable and cost-effective choice for your repair needs.
- Interchangeable Replacement Parts: Every detail matters in vehicle repair, and our stands feature interchangeable parts that align perfectly with Chief p/n 702066, ensuring seamless integration into your existing setup.
- Free Shipping: To make your experience even more rewarding, we offer free shipping on this product, delivering it straight to your commercial address via LTL (Truck Liner). Please note that residential delivery is not available.
Upgrade Your Repair Capabilities Today!
Experience unmatched precision, reach, and compatibility with our Replacement Chief Frame Machine Tall Anchoring Stands. Take your vehicle repair capabilities to new heights and tackle high lift vehicles with confidence.
Replacement Chief Frame Machine Tall Anchoring Stands, sands extend the height to your existing Stands and will allow you to reach high lift vehicles, these stands will give you 4 additional inches, Compare to Chief part # 702066
- Compare To and Replaces Chief p/n 702066 (set of 4 )
- Works on Chief S-21 & S-21M
- Works on Chief EZ-Liner II, Classic & EZ 25
- Works on Chief Goliath, Impulse, Impulse E-VHT
- Works on Chief Stream Liner, Excelerator
- Works on Chief Tital, Fuzion
- Works on Signature , Freedom
- Works on Grabber ProLiner,
- Works on Maxima and Chisum
- Replacement Parts Interchangeable with Chief p/n 702066
- FREE SHIPPING
$3,420.00$4,617.00Replacement Chief Frame Machine Tall Anchoring Stands
$3,420.00$4,617.00 -
Lift Ikotec 3000
PORTABLE AND LIGHTWEIGHT
Our electromechanical ONE-column jack is portable, lightweight and easy to use, making it a really useful tool, either for large or small workshops.
$3,500.00Lift Ikotec 3000
$3,500.00 -
Replacement Chief Pump Power Team Ten Ton Hydraulic Pump (USED)
- SKU:
- CJ-BHK-PUMP-SL-01
- UPC:
- 3503634122362
- Shipping:
- FREE
$3,500.00 -
Replacement Chief EZ Liner II pump – 5 Ton Pull Power
Chief EZ Liner II pump – Replacement
This is the replacement EZ Liner II Frame machine 5 Ton hydraulic pump.We have this pump configured to replace the OEM pump and designed to provide for a seamless hook up and implementation.
- Compare to Chief Part # 690515
- Works On Chief Ez Liner II and Classic Frame machine
- Pump is Manufactured by Power Team / SPX
- 10,000 Psi Pump Pressure for 5 Ton Frame Machines
- If you have questions please contact us before placing your order.
- Includes Up & Down Switch
- Oil Does not Ship with these units (use AW46 Hydraulic oil from you local vendor)
- Free Shipping
Please note that this pump will not fit inside the the center Pedestal.
The original pump for this machine is no longer made and there is
no other pump produced at this time that will fit in that space that meets
the specifications necessary to operate the EZ liner II machine.NOTE: This pump will NOT work on LARGE S-21 Frame machines
Please contact us if you have any question.
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original.
NOTE: Original pump is no longer manufactured.
Specifications
- 1/2 HP for single acting Cylinders
- 110/115V – 50/60 HZ
- 10A – 1 Phase
- Max 3450 rpm – with Solenoid
- 2 Gallon Thermoplastic Reservoir or (462in3)
- 18.5 H X 11.375 L X 9.25 W
- Shipping weight 72 lbs
- Max 10,000 psi
- AW-46 Hydraulic Oil
NOTE: Do not use tractor hydraulic oil
$3,535.00$4,772.25Replacement Chief EZ Liner II pump – 5 Ton Pull Power
$3,535.00$4,772.25 -
Hedson IRT 4 PrepCure 800615 Vertical and Horizontal Surface Infrared Dryer
- SKU:
- IRT-4 PrepCure
- UPC:
- 687927265578
- Availability:
- Usually Ships in 3 to 5 Business Days
Power Rating – 3 kW 220 Volts, 60Hz, Single Phase Cure area – 39″ x 55″ Minimum Distance from Panel – 600mm (24″)
$3,595.00$3,662.40Hedson IRT 4 PrepCure 800615 Vertical and Horizontal Surface Infrared Dryer
$3,595.00$3,662.40 -
HeatMAX Deluxe Induction System by Dentfix
The DF-HM90DX HeatMAX Induction System has five interchangeable inductors to transform how body shops approach Paintless Dent, Repair, Glass /Panel Removal, and Disassembly.
Paintless Dent Repair – Hail damage repair work can be slow, tedious, and often come in huge waves that will overrun a shop, if they are not prepared. Induction is the quickest way to save the factory paint (and your precious time) when performing minor PDR repairs, in multiple areas, on a damaged vehicle.
Glass & Bed Liner – Gently removes bonded glass, windshields, panoramic roof, and rear quarter light without damaging the trim. In addition to glass, the glass inductor can remove Spray-On Bedliner, Metal Bond Adhesives, and Sheet Molding Compound
(SMC) panels.
Dissasembly – Gently Warm it Up or get the metal part Red Hot, Quickly!
Pad : Vinyl Graphics, Sound Pads,Vapor Barriers, Moldings, Emblems, & Decals.
Bolt : Nuts/Bolts, Body Caulking, & Seam Sealers.
Spiral : Bearings, Gears, Pulleys,Oxygen Sensors, & Nuts/Bolts.
Tough jobs get done with induction heating. Make your life easier with the HeatMAX Induction System!Application
A powerful, instantaneous induction heating system ideal for bodywork, mechanics and maintenance.
Feature & BenefitsAuto or Manuel Mode – No need to memorize different settings. Just turn it on and go.
No Flame Max Heat – Safely isolate the heat to accurately target the desired part.
Glue Destroyer – Easily eliminate adhesion without damage to surrounding parts.
IncludesHeatMAX Induction Unit
PDR Inductor
Glass Inductor
Pad Inductor
Bolt Inductor
5 Piece Spiral Inductor with Case
Foot Activated Pedal Trigger
3 Piece Trim Wedge Set
Mobility Cart
StorageIncludes Mobility Cart and a Rugged storage case for the Spiral Inductor Set.
$3,750.00$3,800.00HeatMAX Deluxe Induction System by Dentfix
$3,750.00$3,800.00 -
$3,783.99
$4,324.55Zinko ZN-100 100ton Standard Bottle Jack
$3,783.99$4,324.55 -
Zinko ZJJ-5025 50ton 10″ Stroke Journal Mechanical Jack
Zinko ZJJ-5025 50 Ton 10″ Stroke Journal Mechcanical Jack- Beveled ring gear interlocks with the precision forged pinion to provide shifted tooth actuation. Extremely strong, precise interlocking gears.
Unique ratcheting handle shaft design with nickel-chrome constructed wheel and plunger enables user to obtain powerful worry free pinion rotation, allowing for an easy and smooth operation. Buttress threads will not creep down under load. Operable vertically or laterally (lateral movement requires optional traversing bed). Unique ring gear bearing allows extremely long life and smooth rotational advance. Rigid lifting screw is made from Chrome-molybdenum steel to withstand excessive loads.
Made in Japan.Minimum Height 17.50 inches.
$3,984.47$4,553.68Zinko ZJJ-5025 50ton 10″ Stroke Journal Mechanical Jack
$3,984.47$4,553.68
