-
Mo-Clamp 7400 Mo-Pro Gauge Package
MO-Clamp 7400 Mo-Pro Gauge Package Also referred to as ” Tool Package C” 9020023 – This package includes #7001 Universal Tram Gauge, #7200 Deluxe Centerline Gauge, #7300 Strut Tower Alignment Gauge, display board and hooks. Be sure to use your uni-body and chassis dimension and specification charts.
Replacement Parts: #710120 Board Only, #710126 Hook Set Only Made in the U.S.A.
$4,914.34$7,585.62Mo-Clamp 7400 Mo-Pro Gauge Package
$4,914.34$7,585.62 -
Mo-Clamp 5013 Deluxe #1 Tool Board with Tools
MO-Clamp 5013 Deluxe #1 Tool Board with Tools
The package includes: #5013 Deluxe Tool Board with Hooks #0045 Angle Bite¢â Clamp #0205 Dyna-Mo¢â Clamp #0300 Jr¢â Clamp #0307 Dyna-Mo¢â Corner Clamp #0400 W¢â Clamp #0450 Flash Clamp #0800 Tac-N-Pull¢â Clamp w/Pull Plates #1000 Handy Hook¢â #1100 Handy Link¢â #1250 Panel Puller #1320 Slim Line Sill Hook¢â #1360 Jr Versa Hook¢â #1450 Numerous Angle Puller (NAP)¢â #1700 Chain Locking Fork #1800 Track Hook¢â #1850 Inline Slider¢â #2400 3MA¢â Multi-Adapter Plate #3110 Small Flat Nose Sheet Metal Hook #3140 Large Round Nose Sheet Metal Hook #4054 3/8 ” Screw Pin Shackle w/Triangle #4055 7/16″ Screw Pin Shackle #4058 MAC II¢â Multi-Angle Clamp #4145 Double Grab Hook Assembly #5616 Door Post Puller/Twister #5800 G Clamp #6006 6′ of ¨ü” Mo-Clamp Frame Straightening Chain #6008 8′ of ¨ü” Mo-Clamp Frame Straightening Chain #6300 Nylon Sling #6317 “J” Hook w/¨ü” Chain #6350 Cable Sling #6400 Regular Deep Hook Set #5079 Toolboard Dimensions: 4’x4′ Tools are Heat Treated Steel and Made in the U.S.A. 140 lbs
$4,939.58$6,793.30Mo-Clamp 5013 Deluxe #1 Tool Board with Tools
$4,939.58$6,793.30 -
Aluminum Self-Piercing Rivet Gun – ACL-36061 – SPR-12
Product Description
SPR-12 Aluminum Self Piercing Rivet Gun / ACL-36061
Compare to Prospot PR-5
Aluminum Self Piercing Rivet Gun Kit- Rivet Gun Designed Specifically for work on aluminum alloy vehicle bodies
- Cordless 18V Technology is Safe and easy-to-handle
- High-quality lithium-ion battery to power the high-pressure hydraulic system and the control system.
- Efficient Light weight and portable.
- Micro-computer control system monitors pressure
- Automatically retracts the ram after the rivet installed.
- Adjustable Output Pressure. 4,400 to 11,200 Force pounds (20-50KN adjustable)
- Manual reset button halts the forward movement
- Automatically retracts it to starting position.
- 360 degree rotating arms , for easy access the hard difficult spots.
Kit Includes the Following Items:“C” Yoke 1 1/2 ” ( 35 X 55 mm)
- 1 Lithium-ion Battery (PRR-12)
- 1 18V Battery Charger 110V wall plug (36-PRR-22)
- 1 Handy Strap
- 1 Heavy duty blow molded case
- 1 Case includes multiple rivet storage placement slots
- Gun Weight 10.8 lbs with battery and small “C” yoke
- One Year MFG Warranty
$5,434.85$6,425.31Aluminum Self-Piercing Rivet Gun – ACL-36061 – SPR-12
$5,434.85$6,425.31 -
Dentfix DF-505/DXE The MAXI Extended Dent Removal Repair Station 220v
Dentfix DF-505/DXE The MAXI Extended Dent Removal Repair Station 220v
The DF-505/DXE Maxi Extended is the ultimate steel repair station! Every tool you need all in one station that can be rolled to different bays in the shop. A lockable cabinet with foam fitted inserts to keep the tools organized and accounted for.
Complete kit includes
220V The Maxi Single Phase Unit Welder
Lockable 5-Drawer Cart
5-Piece Hammer Set
6-Piece Dolly Set
Body File & Blade
Bridge Puller (DF-505BP)
Maxi Massager (DF-505DM)
9-Finger Bear Claw (DF-506)
4-Finger Bear Claw (DF-504)
Leverage Puller (DF-503L)
Magnetic Key Electrode (DF-503KEM)
Wiggle Wire Sample
Stud Pin Samples
Weld Key Samples
Right Angle Undercoat Remover (DF-701) with brush and eraser wheels
Flexible Fender Puller (DF-HD0140)
Finger Belt Sander (DF-FBS16)
Door Prop Stick (DF-DSP1)
Suction Gun (DF-SG70)
Ring Hammer (DF-903)
Plastic Scrapper (DF-WK20)
Wedge Scrapper Set (DF-609)
Multi-Clip Pliers (DF-625)
Bodyline Marker Tool (DF-BL10A)
Surge Protector (DF-601A)
Safety Glasses (DF-901SG)
Dust Cover (DF-505DXEDC)$5,887.81$6,690.65Dentfix DF-505/DXE The MAXI Extended Dent Removal Repair Station 220v
$5,887.81$6,690.65 -
Hedson IRT 3-2 PCD 800458 Curing Lamp
- SKU:
- IRT-3-2PcD
- UPC:
- 687927265561
- Availability:
- Usually Ships in 2 to 3 Weeks
Cure area – 79″ x 55″ Minimum Distance from Panel – 600mm (24″) Power Rating – 3 kW each cassette Electrical specifications – 220 Volts, 60Hz, Single Phase, 26A
$5,895.00$6,167.70Hedson IRT 3-2 PCD 800458 Curing Lamp
$5,895.00$6,167.70 -
Replacement Chief S21 Frame Machine Hydraulic Pump – S21
Replacement Chief S21 Frame Machine Hydraulic Pump – S21, Compare this to Chief pump # 605843, works with original Chief S21 Frame machines, Please note, this pump will not work with S21M type machines. Please contact us if you have any questions.
- Compare to Chief part # 605843
- Works on Chief S21 & standard frame machines
- Manufactured by Power Team / SPX
- 10,000 psi ump pressure for 10 ton frame machines
- 110/115V – 20 amp
- Includes up & down switch w/ 25′ cord
- Oil does not ship with this item (use AW46 hydraulic oil from your local vendor)
- Please verify availability before purchasing – may lead time for delivery
- Free shipping
Please contact us if you have any questions
Note: This pump will not work with Chief EZ-liner II or classic frame machines with 5 ton pulling. Also, this pump will not work with the S21M (dual acting) models. If you’re not sure that this pump will work with your frame machine, please contact us prior to purchase.
NOTE: Do not use tractor hydraulic oil. Use hydraulic jack oil only!
$5,900.00$7,965.00Replacement Chief S21 Frame Machine Hydraulic Pump – S21
$5,900.00$7,965.00 -
Replacement Blackhawk Frame Machine Power Pro SL 3000 HD Hydraulic Pump
Replacement Blackhawk Frame machine power pro SL 3000 HD hydraulic pump, this is the original pump that was used by the manufacture and is a plug and play with no modifications required. This is for machines that have 12,000 lbs. lifting capacity, 110/115-volt.
- Replacement Blackhawk SL 3000 HD hydraulic pump
- This pump is for 12,000 lbs. lifting machines only!
- Pump is original pump used by the manufacture
- Manufactured by SPX / Power Team and is made in USA
- 10,000 psi ump pressure for 10-ton frame machines
- 110/115V – 20 amp
- Includes up & down switch w/ 25′ cord
- Oil does not ship with this item (use AW46 hydraulic oil from your local vendor)
- Please verify availability before purchasing – may have lead time for delivery
- Pump uses AW46 hydraulic oil
- Draws 25 amps at full load
- 110/115 VAC 50/60 Hz; Single Phase
- Free shipping
NOTE #1: Do not use tractor hydraulic oil. Use hydraulic jack oil AW46 only!
NOTE #2: This pump is not recommended for the 9,000 lbs. lifting blackhawk machines
NOTE #3: If you have any questions contact prior to purchase
$5,900.00$6,785.00Replacement Blackhawk Frame Machine Power Pro SL 3000 HD Hydraulic Pump
$5,900.00$6,785.00 -
Replacement American Freedom MAXX Frame Machine Hydraulic pump
Replacement American Freedom MAXX frame machine hydraulic pump, this is the original pump that was used by the manufacture and is a plug and play with no modifications required. This is for machines that have 12,000 lbs. lifting capacity. (will not recommended for 9,000 lbs lift machines).
- Replacement American Freedom MAXX frame machine
- Pump is for machines with 12,000 lbs. lift capacity
- Pump is original pump used by the manufacture
- Manufactured by SPX / Power Team and is made in USA
- 10,000 psi ump pressure for 10-ton frame machines
- 110/115V – 20 amp
- Includes up & down switch w/ 25′ cord
- Oil does not ship with this item (use AW46 hydraulic oil from your local vendor)
- Please verify availability before purchasing – may have lead time for delivery
- Pump uses AW46 hydraulic oil
- Draws 25 amps at full load
- 110/115 VAC 50/60 Hz; Single Phase
NOTE #1: Do not use tractor hydraulic oil. Use hydraulic jack oil AW46 only!
NOTE #2: This pump is for 12,000 lbs. lifting machines only ( not recommended for 9,000 lbs machines)
NOTE #3: If you have any questions contact prior to purchase
$5,900.00$6,785.00Replacement American Freedom MAXX Frame Machine Hydraulic pump
$5,900.00$6,785.00 -
Replacement American Freedom Frame Machine Hydraulic pump
Replacement American Freedom frame machine hydraulic pump, this is the original pump that was used by the manufacture and is a plug and play with no modifications required. This is for machines that have 9,000 lbs. lifting capacity, and comes with a pre-wired 120-volt plug. (will not work with MAXX machines w/12,000 lift capacity).
- Replacement American Freedom frame machine hydraulic pump for 9,000 lbs. lifting machines
- Works American freedom Frame machine
- Works American freedom GT Frame machine
- Pump is original pump used by the manufacture
- Manufactured by SPX / Power Team and is made in USA
- 10,000 psi ump pressure for 10-ton frame machines
- 110/115V – 20 amp
- Includes up & down switch w/ 25′ cord
- Oil does not ship with this item (use AW46 hydraulic oil from your local vendor)
- Please verify availability before purchasing – may have lead time for delivery
- Pump uses AW46 hydraulic oil
- Free shipping
NOTE #1: Do not use tractor hydraulic oil. Use hydraulic jack oil AW46 only!
NOTE #2: This pump will not work with work with the American Freedom MAXXD (w/12,000 lbs. lifting)
NOTE #3: If you have any questions contact prior to purchase
$5,900.00$6,785.00Replacement American Freedom Frame Machine Hydraulic pump
$5,900.00$6,785.00 -
DentFix DF-EZN1G/DXE EZ Nitro Plastic Repair Station – Extended
The EZ Nitro Plastic Repair Station – Extended: Engineered to meet the needs of Premier Auto Body Shops everywhere. Utilizing an Award Winning Nitrogen Plastic Welder with a Dual Chamber Nitrogen Generator, the DF-EZN1G/DXE converts shop air into nitrogen and there is no need to refill nitrogen bottles! The easiest to use and most capable plastic welder station EVER, by Dent Fix!
The proprietary Flow Adjust Switch Technology (FAST) system makes the DF-EZN1G/DXE the easiest nitrogen welder to learn and use. It simplifies nitrogen welding and eliminates flow adjustments by the user. This significantly reduces the time to set up the welder and gets the work done FAST.
In addition to a nitrogen welder the kit also includes a thermoplastic hot stapler kit, complete with 7 variety of staples, three mini die grinders with 3 different bits, hand seamer, heat gun, ring hammer, multi-clip pliers, shaping tools, trim removal tools, and a variety of plastic welding rods (ABS, Polypropylene, Polycarbonate, Polyethylene, and Polyurethane).
As added bonus, a high pressure N2 Outlet gives you the ability to attach air-powered tools to the side of the unit and run on nitrogen! Nitrogen is beneficial because it has a lower moisture content, compared to shop air, which helps safeguard the internals from corrosion.
The DF-EZN1G/DXE EZ Nitro Plastic Repair Station by Dent Fix Equipment is everything you need your plastic repair station to be and more.
Kit Includes:EZ Nitro Plastic Welder with Nitrogen and Airless Plastic Welding capabilities
On-board Nitrogen Generator – Creates nitrogen from the atmosphere eliminating the need to refill bottles!
Hot Stapler – Deluxe Kit with 7 varieties of StapleClips (DF-800BR)
Assortment of Plastic Welding Rods (ABS, Polypropylene, Polycarbonate, Polyethylene, and Polyurethane)
Three (3) Mini Die grinders with 3 Unique Bits
Electronic-Controlled Heat Gun (DF-900HG)
Double End Nylon Dolley (DF-900DEND)
Round Head Nylon Chisel (DF-900RHND)
Aluminum Tape (DF-EZN1-AT150)
Multi-Clip Pliers (DF-625)
Plastic Clip Pliers (DF-624CP)
Clip Lifter (DF-618CL)
Hand Seamer (DF-EZN1HS)
Ring Hammer (DF-903)
Dust Cover
Utility Wedge Set (DF-609)
Plastic Lever Scraper (DF-WK20)
Heat Gun Holster
Lockable Cabinet with Keys
5 Year Manufacturer Warranty$6,482.64$7,366.63DentFix DF-EZN1G/DXE EZ Nitro Plastic Repair Station – Extended
$6,482.64$7,366.63 -
Lift King Light Duty Works Package Bed lift and Accessory Package Lift King
Product Description
The Lift King Light Duty WORKS packages bed removal system comes with everything needed for one technician of any size to remove or install OEM pickup boxes of all sizes, including up to 8’ dually boxes. This package includes bed dolly, bed stabilizer, door, hood, hitch bumper attachment and busing holder and the Lift King Main Component quickly converts from the stored position to the working position without needing any tools. Bed box can be removed in as little as five minutes including the original set up time. After removal, the box can easily be moved around the shop and stored as needed. This will also remove beds w/o removing rear bumper. Safely store this in a 3′ X 3′ area
- Plus Package includes our preminum bed dolly
- Plus Package includes bushing holder
- 1 Technician required to remove bed
- Improves productivity (multiple technicans not required)
- Works with little or limited cab to bed clearance
- Lift bed to desired height when repairs are required
- Increases productivity when performing fuel pump replacements
- Mitigates and limits risk of damages
- Lowers risk of employee fatigue, strain and injury
- safest and most efficient way to remove or install a pickup box
- Compact design allows storage in a 3′ X 3′ area
- Ships LTL (large truck)
$6,900.00 -
SPR-12 Aluminum Self Piercing Rivet Gun – Combo Kit 36061
Self Piercing Rivet Gun SPR-12 Aluminum / ACL-36061 and Long Reach “C” Yoke comes with 24 Rivet dies and adapters
Compare to Prospot PR-5
Aluminum Self Piercing Rivet Gun Kit
- Rivet Gun Designed Specifically for work on aluminum alloy vehicle bodies
- Adjustable Output Pressure. 4,400 to 11,200 Force pounds (20-50KN adjustable)
- Cordless 18V Technology is Safe and easy-to-handle
- High-quality lithium-ion battery to power the high-pressure hydraulic system and the control system.
- Efficient Light weight and portable.
- Micro-computer control system monitors pressure
- Automatically retracts the ram after the rivet installed.
- Adjustable Output Pressure.
- Manual reset button halts the forward movement
- Automatically retracts it to starting position.
- 360 degree rotating arms , for easy access the hard difficult spots.
- comes with 24 Rivet dies and adapters
$7,161.25$7,519.00SPR-12 Aluminum Self Piercing Rivet Gun – Combo Kit 36061
$7,161.25$7,519.00
