- “Zinko ZRDH-307 30ton 7" Cylinder” already exists in your wishlist
-
Zinko ZAR-1010T 10ton 10″ Stroke Threaded Ram
These industrial quality, general purpose cylinders are designed for use in a variety of applications where lifting, pushing, bending or holding may be required. Ideal for use in shop, agricultural, automotive/ truck service and construction maintenance.
All Models come with 3/8″ NPT fast-flow quick-connection coupler and dust cap. All cylinders designed with base mounting holes (5/16-18 UNC) Collar plunger threads and base mounting holes provides for easy fixture. Optional adapters make it super easy and cost efficient to convert our 10 ton ram to snap-type or threaded-type applications.
All models are designed for use in any position and feature base mounting holes for easy attachment to almost any fixture.Zinko ZAR-1010T 10 Ton 10″ Stroke Threaded Ram- Cylinder is threaded on both ends for use in many different frame machines, and anywhere a single acting cylinder is needed.
Threaded ends allow use of cylinder with many machines. Chrome-plated piston rods ensure long service life. Polyurethane seals promote high cycle life. Ram half fast flow “quick-connect” couplers included with all rams for fast, easy setup. Heavy duty return springs provide consistent performance.
Special Features:
All models come with either 1/4″ NPT or 3/8″ NPT regular-flow quick-connection couplers and dust caps
10 ton models designed with internal threads on rod end, which can be easily converted for threaded or snap-type application.
Matching base is available upon request
4 ton models come with snap-type inner base
2 ton model comes with flat-type base and screw extension on top$629.09$718.96Zinko ZAR-1010T 10ton 10″ Stroke Threaded Ram
$629.09$718.96 -
Zinko ZRH-204 20ton 4″ Stroke Hollow Ram
Zinko ZRH-204 20 Ton 4″ Stroke Hollow Ram- Design for use in a variety of applications where lifing, pushing, bending or holding may be required.
High-strength alloy steel construction. Chrome-plated piston rods resist wear and corrosion. Special bearing design helps prevent galling for long life and trouble-free performance. Polyurethane seals and wipers to reduce contamination, extending cylinder life. Hardened saddles keep top bearing and plunger from jamming. Saddle grooves help prevent slipping. Heavy-duty spring enables consistent fast plunger retraction. All models come with fast-flow quick-connection coupler and dust cap. May be used in any position. Hollow plunger design allows for both pull and push forces.Country of Origin: Taiwan
$1,166.84$1,333.53Zinko ZRH-204 20ton 4″ Stroke Hollow Ram
$1,166.84$1,333.53 -
Zinko ZAP-40 40 Cubic inch Air Pump
Zinko ZAP-40 40 Cubic Inch Air Pump- Single speed pump, operating at up to 10,000 psi. Operate on ship air to drive a variety of single acting rams, presses and hydraulic pullers.
Operates in any position for ease of use and flexibility. Convenient 360 degree swivel design for better hose control. Exclusive, “air-thrust” design rapidly takes up slack, putting the cylinder rod or tool in work position in seconds. Two models: ZAP-40 for tools and smaller cylinders; ZAP-62 for cylinders as large as 55-Ton capacity. Heavy duty anodized aluminum housing is extremely durable. Portable to any job site equipped with compressed air. Takes the place of manual pumps. Less operator fatigue, more productivity. Compact, light-weight design for easy handling and storage. All-metal air motor for reliability and easy maintenance. Internal relief valve protects system components.
Country of Origin: Taiwan$389.28$444.89Zinko ZAP-40 40 Cubic inch Air Pump
$389.28$444.89 -
Zinko 195212-6 3/8″ Hose 6′
Zinko 195212-6 3/8″ Hose 6′ – 6 Foot Length Hydraulic Hose with 3/8″ NPT Male Ends – 10,000 psi Working Pressure 20,000 psi Burst. Fits all Zinko 3/8″ Couplers.
Country of Origin: Taiwan
$80.24$91.69Zinko 195212-6 3/8″ Hose 6′
$80.24$91.69 -
Zinko ZML-501J 1/2ton Telescopic Transmission Jack
Zinko ZML-501J 1/2 Ton Telescopic Transmission Jack – Designed for transmission removal or installation of passenger cars, vans and light trucks that are raised by an in ground or above ground lift.
Two stage cylinder that provides a lower pick-up point with high lifting capability.
Universal saddle and corner brackets that are fully adjustable with a safety constraint belt to secure the load.
Foot operated two-stage hydraulics allow for precise load control as well as rapid lifting abilities.
Safety bypass system prevents damage to the cylinder.
Equipped with two release pedals, one for fast lowering without a load and the other for slow lowering with a load.
Ram, pump, and piston are specially finished to prevent oil leakage.
Four-wheel base with locking swivel urethane casters to ensure stability and effortless positioning.Capacity (Tons)0.5
Minimum Height (in)38.78
Maximum Heights (in)75.20
Power Lift (in)36.42
Chassis Length (in)28.70
Chassis Width (in)23.54
Saddle Cradle (degree)42° / 46°Side Title (degree)15°
Weight (lbs)180.000000
Country of Origin: Taiwan$1,194.87$1,365.57Zinko ZML-501J 1/2ton Telescopic Transmission Jack
$1,194.87$1,365.57 -
Booster Pac HT1224AGM Commercial Jump Starter/Charger
Booster PAC HT1224AGM Commercial Jump Starter/Charger -Truck Ship Only. HazMat.
The “Big Boy” of wheeled jump starting units has gotten an upgrade: features installed AGM batteries to increase unit longevity and eliminate spill hazards
Specifically designed for over-the-road transportation and heavy-duty implements starting applications
It exceeds the challenges of frigid weather and delivers the instant raw power of 1400 cold cranking amps in 12 Volt mode and 800 cold cranking amps in 24 Volt mode
Features 10 ft. cable leads made of 1/0 cable to reaching the starting points on vehicles of all shapes and sizes
Automatic 7 Amp x 2 Channel Battery Charging System
Ships with (2) Group 31 AGM Batteries Installed
1 Year Limited Warranty$2,551.42$2,934.14Booster Pac HT1224AGM Commercial Jump Starter/Charger
$2,551.42$2,934.14 -
2500 Piece Self Piercing Rivet Kit
Quality Self Piercing rivets made for use with most SPR aluminum Rivet Guns. The rivets are perfect for many types of collision repairs such as Ford, BMW, GM, Audi, Jaguar, Land Rover, Mercedes Benz and many more foreign and domestic vehicles. This product is used when riveting aluminum, steel bonding applications. See our rivet Installation Gun that is used to install this type of Rivets SPR12 Rivet Gun. Rivets are coated to prevent cross contamination.
Use with most self Piercing rivet (SPR) guns, Including, SPR-12, Pro-Spot, Car-O-Liner, Chief, Henrob, TKR, Weilander Schill, Spanesi, CMO, Dent Fix, GYS, and many others
$1,050.002500 Piece Self Piercing Rivet Kit
$1,050.00 -
SPR-12 Aluminum Self Piercing Rivet Gun – Combo Kit 36061
Self Piercing Rivet Gun SPR-12 Aluminum / ACL-36061 and Long Reach “C” Yoke comes with 24 Rivet dies and adapters
Compare to Prospot PR-5
Aluminum Self Piercing Rivet Gun Kit
- Rivet Gun Designed Specifically for work on aluminum alloy vehicle bodies
- Adjustable Output Pressure. 4,400 to 11,200 Force pounds (20-50KN adjustable)
- Cordless 18V Technology is Safe and easy-to-handle
- High-quality lithium-ion battery to power the high-pressure hydraulic system and the control system.
- Efficient Light weight and portable.
- Micro-computer control system monitors pressure
- Automatically retracts the ram after the rivet installed.
- Adjustable Output Pressure.
- Manual reset button halts the forward movement
- Automatically retracts it to starting position.
- 360 degree rotating arms , for easy access the hard difficult spots.
- comes with 24 Rivet dies and adapters
$7,161.25$7,519.00SPR-12 Aluminum Self Piercing Rivet Gun – Combo Kit 36061
$7,161.25$7,519.00 -
Solid Rivet Hand Squeeze Installation Kit
Set is used for solid rivets used in manufacturing and repairs of automobiles that have be in a collision, works with Ford, GM and other manufactures, the set Includes the following:
Stainless Steel Texas hand squeeze with 1 1/2″ and 3″ Yoke
Squeeze sets – 3/32″, 1/8″, 5/32″ & 3/16″ AN470 sets.
Squeeze sets – 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″ & 1/2″ Thick flush sets.
3 Quick Change Yoke Pins
Plastic Carrying Case
manufactured by air capital$391.78$450.54Solid Rivet Hand Squeeze Installation Kit
$391.78$450.54 -
BRG-300 Blind Rivet Gun
This blind rivet gun was designed for the collision repair industry work environment and has a compact lightweight design featuring a pull force of 4,100 lbs and will install rivets from 3/16”(4.5mm) to 1/4” (6.4mm) blind rivets and gives you a full 1” (26mm) pulling stroke. The riveter also features a quick head release that will allow you to replace and or service Jaw and grips with out the use of any tools and will make selecting and changing nozzles quick and easy.
$799.00$1,100.00BRG-300 Blind Rivet Gun
$799.00$1,100.00 -
OTC 6508 Master Disconnect Tool Set
OTC 6508 Master Disconnect Tool Set – 3/8″ and 1/2″ disconnect tools for Ford fuel lines, 5/8″ disconnect tool for Ford heater hoses, 5/16″ and 3/8″ fuel line disconnect tools for GM and Chrysler, Transmission oil cooler line disconnect for Ford and GM vehicles, Fuel line disconnect tool for 1990-1994 Ford Ranger, Explorer, Bronco II, Heater hose disconnect tool for Ford Aerostar vans and Econoline vans and Chrysler vehicles, Oil cooler disconnect tool for Ford vehicles, Clutch coupling release tool for Ford trucks and Cougar/Thunderbird, Fuel line disconnect tool for Chrysler vehicles, Heater hose disconnect tool for GM vehicles, Long-handle disconnect tools for Ford and GM fuel lines, Scissors-style fuel line disconnect tools 5/16″, 3/8″, and 1/2″ for Ford and GM vehicles, Toyota A/C line disconnect tool, GM hydraulic clutch line disconnect tool, GM oil cooler disconnect tool, 1/4″, 5/16″, and 3/8″ universal disconnect tools, Universal transmission line disconnect tool.
$249.93$287.41OTC 6508 Master Disconnect Tool Set
$249.93$287.41 -
CPS Products LDA1000H Pro-Set Refrigerant Leak Detector
CPS Products LDA1000H Pro-Set® Refrigerant Leak Detector
Microprocessor controlled sensor electronics utilizing a multi channel signal detection method improves sensitivity while reducing false alarms.
New E_MOS® sensor technology incorporates a proprietary pulse modulation design to increase both battery and sensor life.
Software managed sensor rejuvenation mode, initiated at each start up ensures the highest level of sensitivity every use,for up to 500 hours of detecting leaks of less than .1 oz per year.
Sensitivity remains constant over the life of the sensor.
The LDA1000H is ETL Certified to meet SAEJ2791 for R-134a, as well meeting all US and International standards for automotive use for SAE J2913 for HFO-1234yf, and Euro Standard EN 14624
50 hour battery life (3 “C” batteries) Auto Off after 10 minutes. Green LED low battery indicator.
500 hours sensor life
2 year warranty excluding batteries and sensor
Both visual and audible leak indicators
Patent Pending$498.76$573.58CPS Products LDA1000H Pro-Set Refrigerant Leak Detector
$498.76$573.58
