-
Zinko ZMJ-50Y 50ton Mini Jack
Zinko ZMJ-50Y 50 Ton Mini Jack- A Compact, powerful jack with a very low profile. Small size jack is ideal for centering heavy equipment or making fine adjustments.
Can be used in conjunction with a mechanical gear puller to create a hydraulic puller with over 5 ton capacity. Can also be used as a spreader to apply force with just over 2-1/2″ of clearance needed. Use in upright, and horizontal position. Country of Origin: JapanMin Ht. 4-5/8″, Max Ht. 6-3/4′
$1,767.94$2,020.50Zinko ZMJ-50Y 50ton Mini Jack
$1,767.94$2,020.50 -
Zinko ZPE-35RH-1M Pump 1/3hp Electric 100V 60 Cubicinch Oil Tank
Zinko ZPE-35RH-1M Pump1/3 Hp Electric 100V 60 Cubic Inch Oil Tank- Two way manual screw type standard valve. Ideal for general industrial electric installations, the construction industry, ship yards, automotive service shops, material handling situations, laboratories and educational institutions. Capable of up to 10,000 psi (70 Mpa) output| Powered by a 1/3 HP, 2000 rpm commutator motor.
Works with standard 110 V AC current. Comes with remote pendant switch, two way manual release valve and shoulder strap for easy handling and operation. Sixty cubic inch oil reservoir allows pump to be used with a wide range of hydraulic components. Super light weight, compact, and powerful 1/3 HP motor. Easily transported to any job site. The fully sealed reservoir allows for operation in any position. With a fully enclosed motor and pump, it is ideal for outside use. Optional battery-operated 12V & 24V DC models are available upon request. Optional solenoid 2 way and 4 way manual control valves also available upon request
Country of Origin: Japan$1,746.63$1,995.00Zinko ZPE-35RH-1M Pump 1/3hp Electric 100V 60 Cubicinch Oil Tank
$1,746.63$1,995.00 -
Zinko ZJJ-2513 25ton 5″ Stroke Journal Mechanical Jack
Zinko ZJJ-2513 25 Ton 5″ Stroke Journal Mechcanical Jack- Beveled gear construction combines the precision forging pinion to provide shifted tooth form for strong interlocking.
Unique construction bearing makes for longer life and smooth horizontal advance. Rigidly designed screw made by Chrome-molybdenum steel to withstand excessive load. Special ratchet handle interior design with nickel-chrome made wheel and plunger enables to obtain strong rotation, easy and smooth operation.
Country of Origin: Japan$1,742.64$1,991.59Zinko ZJJ-2513 25ton 5″ Stroke Journal Mechanical Jack
$1,742.64$1,991.59 -
Mo-Clamp 4015 Frame Rack Jaws with Angle Bracket
MO-Clamp 4015 Frame Rack Jaws with Angle Bracket – Will hold down cars with horizontal pinch welds including Honda 1990 and up. Angles can be drilled to fit frame racks, benches, etc. Includes two #4044 1/2 ” Shackles.
Gripping Surface: 13″ wide (330mm) Overall Length: 6″ (406mm) Capacity: 6 tons (5,443kg) Replacement Parts: #5200 Nut, Bolt and washer, 840076 spring #4016 Frame rail angle bracket (1 only) Heat Treated Steel. Made in the U.S.A.
$1,672.60$2,508.58Mo-Clamp 4015 Frame Rack Jaws with Angle Bracket
$1,672.60$2,508.58 -
Zinko ZAJ-1008 10ton 3″ Stroke Journal Mechanical Aluminum Jack
10 Ton Aluminum Mechanical Journal Jack, 3 inch stoke. Beveled ring gear interlocks with the precision forged pinion to provide shifted tooth actuation. Extremely strong, precise interlocking gears. Used in structural steel work, bridges, shop building and other industry where powerful, all position jacks are required. Ideal for applications where electric power or air power is inconvenient or dangerous.
Special Features:
Unique construction bearing is made for longer life and smooth horizontal advance.
Rigidly designed screw made by chrome -molybdenum steel to withstand excessive load.
Beveled ring gear interlocks with the precision forged pinion to provide shifted tooth form for strong and excellent interlocking.
Special ratchet handle interior design with nickel-chrome wheel and plunger enables strong rotation for an easy , smooth operation.
Buttress threads will not creep down under load.
Operable vertically or laterally (lateral movement requires optional traversing bed).
Constructed of aluminum alloy, reducing overall weight.Country of Origin: Japan
More Information
Capacity (Tons) :10
Stroke (in) :3.15
Operation Force (Ft. / lb.) :185
Minimum Height (in) :6.88
Maximum Heights (in) :10.03
Saddle Diameter (in) :2.28
Base Diameter (in) :4.01
Weight (lbs) :18.000000Minimum Height 6 15/16 inches
$1,611.76$1,842.01Zinko ZAJ-1008 10ton 3″ Stroke Journal Mechanical Aluminum Jack
$1,611.76$1,842.01 -
Zinko ZAml-502 1/2ton Air Hydraulic High Lift Transmission Jack
1/2 ton air hydraulic high lift transmission jack with 2 stage. Designed for transmission removal or installation of passenger cars, vans and light trucks that are raised by an in ground or above ground lift.
Special Features:
Dual Performance – Can be used manually or by air actuated operation.
Safety bypass and overload system prevents jack from being used beyond its rated capacity.
Foot operated release valve frees operator’s hands to guide the load.
Special 2-stage design enables work from lower pickup point with higher reach capacity.
Fully adjustable universal saddle with adjustable corner brackets and safety chain.
Equipped with handle, easy to move in all directions.
Swivel caster wheels are for easy moving and positioning.
Chromed telescopic rams and the strong leg design provides maximum stability.
Adjustable head available at additional charge, please email or call for more information.More Information
Capacity (Tons) 0.5
Minimum Height (in) 33.25
Maximum Heights (in) 71
Power Lift (in) 37.75
Chassis Length (in) 31 x 37
Chassis Width (in) —
Saddle Cradle (degree) 30°
Side Title (degree) 15°
Weight (lbs) 180.000000$1,600.20$1,828.80Zinko ZAml-502 1/2ton Air Hydraulic High Lift Transmission Jack
$1,600.20$1,828.80 -
Zinko ZRDH-307 30ton 7″ Cylinder
Zinko ZRDH-307 30 Ton 7″ Cylinder- Design for use in a variety of applications where lifing, pushing, bending or holding may be required.
Double acting design for greater speed and positive control. Interfaces with automated operations. 3/8″ fast flow couplers included on all models. Threaded collar along with hollow plunger design allows for both pull and push forces. Baked enamel finish for increased corrosion control. Removable hardened saddles protect plunger during lifting and pressing. Built in safety valve prevents accidental over-pressurization. Plunger wiper seals reduce contamination, extending cylinder life.
Country of Origin: Taiwan$1,599.81$1,828.36Zinko ZRDH-307 30ton 7″ Cylinder
$1,599.81$1,828.36 -
OTC 4022 Air/ Hydraulic Pump
OTC 4022 Air/ Hydraulic Pump -Air / Hydraulic Pump With shop air as the energy source, this pump has the power and oil capacity (80 cu. in. usable oil) to drive even the large 55-ton rams. It’s an ideal all-around power source for dozens of body, frame, and alignment applications. It can be used with a variety of rams, presses, and hydraulic pullers operating at up to 10,000 PSI. An internal relief valve protects the hydraulic components regardless of hydraulic pressure. In addition, a two-stage release mechanism gives fast or metered ram return while reducing hydraulic shock. The 4022 is equipped with a 2-gal. reservoir. This pump requires 9 cfm at 100 PSI air pressure at the pump. No. 4022 Air/ hydraulic pump with a 2-gallon (442 cu. in.) plastic reservoir. Performance @ 100 PSI Hydraulic Pressure* Oil Delivery 0 PSI…………………………59 cu. in./min. 5,000 PSI…………………..30 cu. in./min. 10,000 PSI…………………..4 cu. in./min. * Oil delivery based on 20 cfm air supply at the pump. Special order item only, please call customer service.
$1,576.19$1,812.61OTC 4022 Air/ Hydraulic Pump
$1,576.19$1,812.61 -
Zinko ZRM-100 100ton 0.63″ Stroke Super Low Cylinder
ZRM Series Single-Acting Low Height Cylinders. These low height cylinders have a flat and compact design for use where other cylinders will not fit. Designed for use where other cylinders will not fit. All models are designed for use in any position and feature base mounting holes for easy attachment to almost any fixture.
Special Features:
Light weight and rugged.
Built for power & mobility.
Designed for use in all positions.
Come with a 3/8″ NPT fast flow coupler.
Mounting holes allow easy mounting on to almost any fixture.
Grooved plunger ends do not require saddle.Country of Origin: Taiwan
More Information
Capacity (Tons) :100
Stroke (in) :0.63
Oil Capacity (in³) :12.39
Cylinder Effective Area (in²) :19.63
Minimum Height (in) :3.34
Maximum Heights (in) :3.97
Outside Diameter (in) :7.00 x 6.00
Weight (lbs) :34.000000$1,546.14$1,767.01Zinko ZRM-100 100ton 0.63″ Stroke Super Low Cylinder
$1,546.14$1,767.01 -
Zinko ZASJ-50M 5ton Air Hydraulic Service Jack
Easy to operate push-button floor jack with an air pump. Ideal for use in tight spaces including on trucks, automotive and agricultural equipment.
Special Features:
The jack can be operated either manually or pneumatically.
Overall construction of selected steel frame, full swivel rear caster wheels and large lifting saddle provide easy positioning and enable these jacks to safely lift to their rated capacities.
Quick lift foot pump can easily lift the jack saddle to the loading point.
Pneumatic operation requires air pressure ranges from 90 to 140 psi operated by a push button for quick lift.
Push button control unit can be easily removed from the handle enabling operator to view the load from various angles.
Large release knob provides metered release control.
Extra long low chassis reaches under low overhangs for easy load positioning.Country of Origin: Japan
More Information
Capacity (Tons) :5
Minimum Height (in) :5.90
Hydraulic Lift (in) :16.14
Maximum Heights (in) :22.04
Chassis Length (in) :55.70
Chassis Width (in) :15.15
Height of Frame (in) :7.87
Operating (psi) :116-145
Weight (lbs) :280.000000$1,531.95$1,750.80Zinko ZASJ-50M 5ton Air Hydraulic Service Jack
$1,531.95$1,750.80 -
Mo-Clamp 4028 BMW Hold Down
MO-Clamp 4028 BMW Hold Down – For holding BMW vehicles with oblong or round jack tube holes.
Overall Length: 14″ (356 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #5249 Nut, Bolt & Washer, #402801 Rocker Pin Heat Treated Steel. Made in the U.S.A.
$1,515.76$2,273.36Mo-Clamp 4028 BMW Hold Down
$1,515.76$2,273.36 -
Zinko ZJJ-1513 15ton 5″ Stroke Journal Mechanical Jack
15 Ton 4.92″ Stroke Journal Mechcanical Jack- Beveled gear construction combines the precision forging pinion to provide shifted tooth form, strong and excellent interlocking.
Special Features:
Unique construction bearing is made for longer life and smooth horizontal advance.
Rigidly designed screw made by chrome -molybdenum steel to withstand excessive load.
Beveled ring gear interlocks with the precision forged pinion to provide shifted tooth form for strong and excellent interlocking.
Special ratchet handle interior design with nickel-chrome wheel and plunger enables strong rotation for an easy , smooth operation.
Buttress threads will not creep down under load.
Operable vertically or laterally (lateral movement requires optional traversing bed).Country of Origin: Japan
More Information
Capacity (Tons) :15
Stroke (in) :4.92
Operation Force (Ft. / lb.) :310
Minimum Height (in) :10.04
Maximum Heights (in) :14.96
Saddle Diameter (in) :2.48
Base Diameter (in) :3.03
Weight (lbs) :40.000000$1,505.23$1,720.26Zinko ZJJ-1513 15ton 5″ Stroke Journal Mechanical Jack
$1,505.23$1,720.26
