-
Zinko ZRH-306 30ton 6.13″ Stroke Hollow Ram
Overview
These General Purpose Hollow type Cylinders of our store are designed for use in a variety of applications where lifting, pushing, bending or holding may be required.Ideal for use in shop, agricultural, automotive/truck service, and construction maintenance.
Special Features:
High-strength alloy steel construction.
Chrome-plated piston rods resist wear and corrosion.
Special bearing design helps prevent galling for long life and trouble-free performance.
Polyurethane seals and wipers to reduce contamination, extending cylinder life.
Hardened saddles keep top bearing and plunger from jamming.
Saddle grooves help prevent slipping.
Heavy-duty spring enables consistent fast plunger retraction.
All models come with fast-flow quick-connection coupler and dust cap.
May be used in any position.
Hollow plunger design allows for both pull and push forces.
More Information
Capacity (Tons) :30
Stroke (in) :6.10
Oil Capacity (in³) :44.06
Cylinder Effective Area (in²) :7.22
Minimum Height (in) :13.00
Maximum Heights (in) :19.10
Outside Diameter (in) :4.50
Weight (lbs) ;45.000000$1,503.88$1,718.71Zinko ZRH-306 30ton 6.13″ Stroke Hollow Ram
$1,503.88$1,718.71 -
Body Buggy Chassis Roller – 5′
Body Buggy Chassis Roller – 5′ – Quick and safe method to transport disabled vehicles on and off a rack and around the shop or into a paint booth. MADE IN THE USA!
After a simple five minute installation, the unit becomes “part of the vehicle”, negating the need to employ any unstable or dangerous lift points. The included spacer kit allows for the use of original fasteners, alleviating the need for any additional fastener inventory. When installed, the vehicle is easily rolled onto a frame rack, into a paint booth or to storage, out of the way of production. The device can be installed on the front or rear of most any vehicle using the cradle or sub-frame mounting points and hardware. The Body Buggy has a max weight rating of 4,500 lbs and includes a 5 year warranty.
INCLUDED: Main Beam (5 Foot), Wheel Assemblies, Sliding Lock Collars, Mounting Brackets (2 Pairs of different heights), Hitch Pins & Clips, Fitment Pin Spacer, Storage Crate, and 10 pc Spacer Kit.
Free up Rack Space with the patented Body Buggy DF-BB105
$1,501.86$1,706.65Body Buggy Chassis Roller – 5′
$1,501.86$1,706.65 -
Replacement Chief Style Frame Anchoring Stands – Generation 4
Replacement Chief Style Frame Anchoring Stand – Single: Precision and Versatility Redefined
Upgrade your frame repair capabilities with our high-performance Replacement Chief Style Frame Anchoring Stand – Single, designed to deliver precision and reliability on par with Chief 4th Generation clamps 702082 & CK110017. This stand is compatible with a wide range of frame machines, including S21, S21M, EZ liner, Classic, Impulse, Goliath, Titan, and more, ensuring seamless integration into your setup.
Key Features:
- Unrivaled Performance: Our Replacement Chief Style Frame Anchoring Stand – Single is engineered to meet the highest standards of frame repair. Comparable to Chief 4th Generation clamps 702082 & CK110017, this stand provides exceptional gripping power and reliable holding, ensuring precise and efficient frame repairs.
- Versatile Compatibility: Enjoy seamless compatibility with various Chief Frame Machine models, including S-21 & S-21M, EZ-Liner II, Classic & EZ 25, Goliath, Impulse, Impulse E-VHT, Stream Liner, Excelerator, Chisum, Freedom, Signature, and Proline Frame systems. Embrace the flexibility to work with multiple frame machines.
- Seamless Replacement: Our Replacement Chief Style Frame Anchoring Stand – Single efficiently replaces Chief p/n 702082 & CK110017, ensuring consistent performance and effortless integration into your existing setup.
- Comprehensive Single Package: The single anchoring stand assembly includes a new bolts kit, one 5 1/4 inch Metric bolt, and one Metric fastener bar, providing you with all the necessary components for a hassle-free installation.
- Durable Construction: With a powder coat finish, our stand boasts excellent resistance to wear and tear, ensuring longevity and optimal performance in demanding repair applications.
- Non-OEM Aftermarket Excellence: As a non-OEM aftermarket replacement part, our stand is engineered to deliver the same level of quality and performance as the original Chief 4th Generation clamps 702082 & CK110017, making it a reliable and cost-effective choice for your frame repair needs.
- Convenient Free Shipping: We value your satisfaction and convenience, offering free shipping on this product to ensure a seamless and timely delivery to your desired location.
Experience Precision and Versatility Redefined!
Elevate your frame repair capabilities with our Replacement Chief Style Frame Anchoring Stand – Single and experience the excellence of Chief 4th Generation clamps 702082 & CK110017. With unmatched gripping power and seamless compatibility, this stand is your ticket to flawless frame repairs.
Unlock the potential of our Replacement Chief Style Frame Anchoring Stand – Single and take your frame repairs to a new level of precision and efficiency!
- Single Anchoring stand assembly
- Compare To and Replaces Chief p/n 702082 & CK110017
- Works on Chief S-21 & S-21M
- Works on Chief EZ-Liner II, Classic & EZ 25
- Works on Chief Goliath, Impulse, Impulse E-VHT
- Works on Chief Stream Liner, Excelerator
- Works on Chisum, Freedom, Signature, Proline Frame system
- Includes New Bolts Kit
- Includes (1) 5 1/4 inch Metric Bolts
- Includes (1) Metric Fastener Bars
- Powder Coat Finish
- Includes Free Shipping
- Shipping Weight 90 lbs
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
$1,440.75$1,945.01Replacement Chief Style Frame Anchoring Stands – Generation 4
$1,440.75$1,945.01 -
Mo-Clamp 5010 #1 Tool Board
MO-Clamp 5010 #1 Tool Board with Tools Including:
- #0100 B Clamp
- #0200 C Clamp
- #0300 JR Clamp
- #0400 W Clamp
- 2- #1200 Twin Pull
- #1300 Sill Hook
- #1800 Track Hook
- #5011 Tool Board with Hooks
#5011 Toolboard Dimensions: 2’x2′ Tools are Heat Treated Steel and Made in the U.S.A
$1,418.79$2,127.92Mo-Clamp 5010 #1 Tool Board
$1,418.79$2,127.92 -
Body Buggy Chassis Roller – 4′
Body Buggy Chassis Roller – 4′ – Quick and safe method to transport disabled vehicles on and off a rack and around the shop or into a paint booth. MADE IN THE USA!
After a simple five minute installation, the unit becomes “part of the vehicle”, negating the need to employ any unstable or dangerous lift points. The included spacer kit allows for the use of original fasteners, alleviating the need for any additional fastener inventory. When installed, the vehicle is easily rolled onto a frame rack, into a paint booth or to storage, out of the way of production. The device can be installed on the front or rear of most any vehicle using the cradle or sub-frame mounting points and hardware. The Body Buggy has a max weight rating of 4,500 lbs and includes a 5 year warranty.
INCLUDED: Main Beam (4 Foot), Wheel Assemblies, Sliding Lock Collars, Mounting Brackets (2 Pairs of different heights), Hitch Pins & Clips, Fitment Pin Spacer, Storage Crate, and 10 pc Spacer Kit.
Free up Rack Space with the patented Body Buggy DF-BB104
$1,407.69$1,599.65Body Buggy Chassis Roller – 4′
$1,407.69$1,599.65 -
Zinko ZSJ-50H 5ton Heavy Duty Service Jack
These heavy-duty service jacks are compact and designed for use on a wide range of automobiles. From sedans to light trucks and vans, the ZSJ Series is the professional’s choice for quick, efficient chassis lifting.
Special Features:
Overall construction from selected steel frame, full swivel rear caster wheels.
Extra long chassis reaches under low overhangs.
Ductile steel saddle for better grip and vehicle frame protection.
Overload safety valve
More Information
Capacity (Tons) :5
Minimum Height (in) :5.90
Hydraulic Lift (in) :16.14
Maximum Heights (in) :22.04
Chassis Length (in) :55.70
Chassis Width (in) :14.37
Height of Frame (in) :7.87
Weight (lbs) :241.000000$1,400.70$1,600.80Zinko ZSJ-50H 5ton Heavy Duty Service Jack
$1,400.70$1,600.80 -
Dentfix DF-595II Hammer Head Removal System
Dent Fix DF-595II Hammer Head Dent Removal System –
Replace your stud welder with the 110 volt DF-595ii HammerHead. Same great quality, same essential accessories that provides the technician with the means to higher productivity and better results. It’s like having sticky fingers and being able to pull dent with your hand.
110 Volt
1 year warranty.
60Lbs
Formerly Know as Shark 2 Dent remover (Name changed by Manufacturer)
Included Items:
Weld pin Tip (1), Washer Tip (1), Shrink Tip (1), Wiggle Wire Tip (1), Short Pull Rod (1), Slide Hammer With Rod and Weight (1), Leverage Rod (1), Ground Magnet (1), # Finger Claw, & 1Pound of Wiggle WireMade in China. 1 year warranty. Use with a 30 amp breaker.
$1,396.34$1,586.75Dentfix DF-595II Hammer Head Removal System
$1,396.34$1,586.75 -
Replacement Chief EZ Extra 25 Frame Machine Lift Ram
Replacement Chief EZ Extra 25 Frame Machine Lift Ram
This is the lift ram for a Chief EZ-Liner Extra 25 frame machine, this is a bolt on and go ram, this ram ships same day.
- Compare to and replaces Chief p/n 649280
- Works with Chief EZ Extra 25 Frame Machine
- 15.7 Ton – 14-1/8″ Stroke
- Made In USA
- 1 Year Warranty
- 100% money back guarantee
- FREE SHIPPING
This is a Non-OEM, Aftermarket, Replacement part that replaces the original.
Please call if you have any Questions.$1,381.25$1,864.69Replacement Chief EZ Extra 25 Frame Machine Lift Ram
$1,381.25$1,864.69 -
Zinko Zml-500 1/2ton Transmission Jack
Designed for transmission removal, transport, and installation in passenger cars, vans, and light trucks that are lifted by an in-ground or above-ground lift.
Special Features:Two stage cylinder that provides a low pick-up point with high lifting capability.
Universal saddle and corner brackets that are fully adjustable with a safety constraint belt to secure your load.
Foot operated two-stage hydraulics allow for precise load control as well as rapid lifting abilities.
Safety bypass system that prevents damage to the cylinder.
Equipped with two release pedals, one for fast lowering without a load and the other provides slow lowering with a load.
Ram, pump, and piston are specially finished to prevent oil leakage.
Four-wheel base with locking swivel urethane casters to ensure stability and effortless positioning.
More Information
Capacity (Tons) :0.5
Minimum Height (in) :39.88
Maximum Heights (in) :68.89
Power Lift (in) :29.01
Chassis Length (in) :33.26
Chassis Width (in) :33.26
Saddle Cradle (degree) :30° / 15°
Side Title (degree) :15°
Weight (lbs) :193.000000$1,365.41$1,560.47Zinko Zml-500 1/2ton Transmission Jack
$1,365.41$1,560.47 -
Zinko ZR-306A 30ton 6″ Stroke Aluminum Cylinder
Zinko ZR-306A 30 Ton 6″ Stroke Aluminum Cylinder
Light weight and rugged. Built for power & mobility. Designed for use in all positions. Equipped standard with grooved saddles. Steel base-plated for increased durability. All body, base and plunger are hard coat anodized. The highest strengths of aluminum alloys are used and heat treated to provide the maximize combination of strength and fracture resistance.
Country of Origin: Taiwan
Min Ht. 10.79″ MAXIMUM OPERATION: 10,000 PSI$1,361.54$1,556.04Zinko ZR-306A 30ton 6″ Stroke Aluminum Cylinder
$1,361.54$1,556.04 -
Mo-Clamp 4018 Mercedes Anchoring Adapters
MO-Clamp 4018 Mercedes Anchoring Adapters – For holding vehicles with Mercedes-type jack tube holes. Jack pin adapters provided for early and late models (two different sizes).
Overall Length: 14″ (356 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #5249 Nut, Bolt & Washer, #401805 Small Pin, #401804 Large Pin Heat Treated Steel. Made in the U.S.A.
$1,351.92$2,027.63Mo-Clamp 4018 Mercedes Anchoring Adapters
$1,351.92$2,027.63 -
Replacement Chief Phoenix Frame Machine Lift Ram – Hydraulic Cylinder
Replacement Chief Phoenix Frame Machine Lift Ram, This hydraulic is made in the USA and bolts to your machine with no modification.
- Compare to and replaces Chief Phoenix lift Ram Part # 451018
- Picture accurately represents what you will receive
- Made In USA
- 100% Guarantee
- Free Shipping
Note: We are not a chief distributor, This ram replaces the Goliath lift ram. If you want to pay
retail pricing please contact your local chief distributorNote: this is the same ram that is used for the chief goliath lift ram
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
$1,322.50$1,785.38Replacement Chief Phoenix Frame Machine Lift Ram – Hydraulic Cylinder
$1,322.50$1,785.38
