-
Mo-Clamp 6319 Jumbo Sling
MO-Clamp 6319 Jumbo Sling – Biggest one we make. Designed for lower/ upper suspensions, door pillars and about anywhere you need a pull that conforms to odd shaped vehicle parts.
Overall Length: 60″ (762mm) Width: 3 ” (78mm) Made in the U.S.A.
$179.85$263.51Mo-Clamp 6319 Jumbo Sling
$179.85$263.51 -
Mo-Clamp 4018 Mercedes Anchoring Adapters
MO-Clamp 4018 Mercedes Anchoring Adapters – For holding vehicles with Mercedes-type jack tube holes. Jack pin adapters provided for early and late models (two different sizes).
Overall Length: 14″ (356 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #5249 Nut, Bolt & Washer, #401805 Small Pin, #401804 Large Pin Heat Treated Steel. Made in the U.S.A.
$1,351.92$2,027.63Mo-Clamp 4018 Mercedes Anchoring Adapters
$1,351.92$2,027.63 -
Mo-Clamp 4041 Male Clamp Jaw with Nut, Bolt, Spring, and Washer for MO-4025
MO-Clamp 4041 Male Clamp Jaw with Nut, Bolt, Spring, and Washer for MO-4025
$102.11$138.93 -
Mo-Clamp 0050 A Clamp
MO-Clamp The A Clamp 0050 grips narrow seams and ridges. Hardened steel cross-hatch teeth assure a secure pull. Excellent for use with slide hammer. Clamp has raised “bolt stoppers” to hold bolts stationary, for easy, one-handed tightening. Use only with ¼” chain.
$123.51$180.97Mo-Clamp 0050 A Clamp
$123.51$180.97 -
Mo-Clamp 210060 Replacement Horizontal Bracket
MO-Clamp 210060 Replacement Horizontal Bracket
$87.14$118.56Mo-Clamp 210060 Replacement Horizontal Bracket
$87.14$118.56 -
Mo-Clamp 5820 Pinch Weld Brackets – Set of 4
MO-Clamp 5820 Pinch Weld Brackets – Weld-on pinch weld brackets. 12″ brackets for welding to bottom of automobiles without pinch welds. Works with most pinch weld holding systems. Allows for hook-up to a frame rack or hold-down system.
Overall Length: 12″ (305mm) Capacity: 2 tons (1,814kg) Heat Treated Steel. Made in the U.S.A.
$108.08$158.36Mo-Clamp 5820 Pinch Weld Brackets – Set of 4
$108.08$158.36 -
Mo-Clamp 6260 3/8″ Alloy Clevis Slip Hook
MO-Clamp 6260 3/8″ Alloy Clevis Slip Hook
Working Load Limit: 5,500 lbs Capacity: 7 tons (6,350kg)
Replacement Parts: #62101 Clevis Pin, #62102 Rue Clip
Heat Treated Steel. Made in the U.S.A.
$35.38$44.93Mo-Clamp 6260 3/8″ Alloy Clevis Slip Hook
$35.38$44.93 -
Mo-Clamp 1450 Numerous Angle Puller
MO-Clamp 1450 Numerous Angle Puller – The NAP allows pulls from any angle. Just put the bolt through a 1/2″ hole and pull. Use with #2100 or #2400 Multi-Adapter Plates, or with back-up plates. Designed for use with 3/8″ chain.
Overall Length: 6″ (152 mm) Capacity: 4 tons (3,629 kg) Replacement Parts: #5245 Nut, Bolt, & Washer Heat Treated Steel. Made in the U.S.A.
$74.81$101.78Mo-Clamp 1450 Numerous Angle Puller
$74.81$101.78 -
Mo-Clamp 4042 Female Clamp Jaw with Nut, Bolt, Spring, and Washer for MO-4025
MO-Clamp 4042 Female Clamp Jaw with Nut, Bolt, Spring, and Washer for MO-4025
$102.11$138.93 -
Mo-Clamp 2100 2Ma Multi-Adapter Plate
MO-Clamp 2100 2MA Multi-Adapter Plate – Designed for most foreign and domestic vehicles with Mac-Pherson suspension, the 2MA fits approximately 95% of the various strut bolt patterns. The 2MA Plate also offers unlimited body and frame pulls with a variety of compatible accessories. Can be used on damage to door posts, frame horns, brackets, cowls, or rear axles. Use a #1450 Numerous Angle Puller (NAP) or #1500 Pull Ring for fast hook-ups and a variation of pulls. Includes three 4-way legs. Large-base legs give good support for pulling, with four hole sizes to accommodate most vehicles.
Overall Length: 9″ (229 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #5230 Bolt & Washer, #9450 Leg, Bolt & Washer Heat Treated Steel. Made in the U.S.A.
$459.03$688.46Mo-Clamp 2100 2Ma Multi-Adapter Plate
$459.03$688.46 -
Mo-Clamp 7300 Strut Tower Alignment Gauge
MO-Clamp 7300 Strut Tower Alignment Gauge – Measures strut tower height at both forward and aft locations. Determines centerline and locates lower control arm centerline position. Use in conjunction with the #7200 Deluxe Centerline Gauge. Measurements are in metric units. Includes 4″ (102mm) Reverse Cone Pointer, 8″ (203mm) Reverse Cone Pointer, 4″ (102mm) Tower Pointer, and 8″ (203mm) Tower Pointer.
Replacement Parts: #710106 4″ (102mm) Reverse Cone Pointer, #710107 8″ (203mm) Reverse Cone Pointer, #710109 4″ (102mm) Tower Pointer, #710108 8″ (203mm) Tower Pointer Made in the U.S.A.
$1,090.10$1,634.94Mo-Clamp 7300 Strut Tower Alignment Gauge
$1,090.10$1,634.94 -
Mo-Clamp 7000 Universal Tram Gauge with Storage Case
MO-Clamp 7000 Universal Tram Gauge with Storage Case – Tram Instruments are a versatile and indispensable tool for determining collision damage to uni-body cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mechanical components. The Tram Instrument makes it easy to establish dimensions around components and to check contours by comparing measurements from one side of the vehicle to the other. Measures from 2-1/2″ (65mm) to 11′ (3.3m). Level bubble installed in sliding head for accuracy in measurement. Includes hard plastic storage case. Made in the U.S.A.
$1,160.83$1,741.03Mo-Clamp 7000 Universal Tram Gauge with Storage Case
$1,160.83$1,741.03
