-
$260.91$298.18
Zinko ZHP-19 18 Cubic Inches Single Speed Hand Pump-
Works with a wide variety of rams including short, push, spreader and snap-set types. Extremely portable, great for on site use. Chrome-plated piston rods for long pump life. Polyurethane seals allow greater cycle counts reducing service requirements. Easy to mount design. Works with “quick-connect” couplers for fast set up. Heavy duty return springs provide consistent performance.
Country of Origin: Taiwan
Shop Now
-
$835.94$955.36
These lightweight aluminum service jacks are easy to maneuver and are a great choice for working on custom cars in the shop or on the race track.
Special Features:
Fast performance – 3 pumps to maximum height on model ZSJ-15A3, and 6 pumps to maximum height on model ZSJ-15A6.
Low profile – extremely low starting point designed specifically for race cars and low profile vehicles.
Roller front wheel, and rear wheel casters make these jacks easily maneuverable.
Durable – the highest grade die cast aluminum combined with our patented hydraulic system while meeting all of
Zinko’s high standards make this jack trouble-free.
Universal – 3,000 lbs. capacity, combined with a notched lift cup that has a removable rubber insert that allows for use on many types of vdhicles. No stop bracket required.
Features two piece handle that is strong and portable.
Standard model comes with dual carrying handles. Optional dirt track stabilizer for use on non-paved surfaces are available upon request.
More Information
Capacity (Tons) : 1.5
Minimum Height (in) : 3.50
Hydraulic Lift (in) : 14
Maximum Heights (in): 17.5
Chassis Length (in) : 23.63
Chassis Width (in) : 11.75
Height of Frame (in): 6.13
Weight (lbs) : 47.000000
Shop Now
-
$353.19$403.64
Zinko ZAR-106T 10 Ton 6″ Stroke Threaded Ram- Cylinder is threaded on both ends for use in many different frame machines, and anywhere a single acting cylinder is needed.
Threaded ends allow use of cylinder with many machines. Chrome-plated piston rods ensure long service life. Polyurethane seals promote high cycle life. Ram half fast flow “quick-connect” couplers included with all rams for fast, easy setup. Heavy duty return springs provide consistent performance.
Country of Origin: Taiwan
Min Ht. 13.5″ 1 – 1/4″ NPT female threads on the base and 1″ UNC thread on the top
Shop Now
-
$2,761.19$3,155.64
Zinko ZRH-606 60 Ton 6″ Stroke Single Acting Cylinder Hollow Plunger- Design for use in a variety of applications where lifting, pushing, bending or holding may be required.
High-strength alloy steel construction. Chrome-plated piston rods resist wear and corrosion. Special bearing design helps prevent galling for long life and trouble-free performance. Polyurethane seals and wipers to reduce contamination, extending cylinder life. Hardened saddles keep top bearing and plunger from jamming. Saddle grooves help prevent slipping. Heavy-duty spring enables consistent fast plunger retraction. All models come with fast-flow quick-connection coupler and dust cap. May be used in any position. Hollow plunger design allows for both pull and push forces.
Country of Origin: Taiwan
Min Ht. 12.75″
Shop Now
-
$1,742.64$1,991.59
Zinko ZJJ-2513 25 Ton 5″ Stroke Journal Mechcanical Jack- Beveled gear construction combines the precision forging pinion to provide shifted tooth form for strong interlocking.
Unique construction bearing makes for longer life and smooth horizontal advance. Rigidly designed screw made by Chrome-molybdenum steel to withstand excessive load. Special ratchet handle interior design with nickel-chrome made wheel and plunger enables to obtain strong rotation, easy and smooth operation.
Country of Origin: Japan
Shop Now
-
$1,800.08$2,057.23
Zinko ZRH-603 60 Ton 3″ Stroke Hollow Ram- Design for use in a variety of applications where lifting, pushing, bending or holding may be required.
High-strength alloy steel construction. Chrome-plated piston rods resist wear and corrosion. Special bearing design helps prevent galling for long life and trouble-free performance. Polyurethane seals and wipers to reduce contamination, extending cylinder life. Hardened saddles keep top bearing and plunger from jamming. Saddle grooves help prevent slipping. Heavy-duty spring enables consistent fast plunger retraction. All models come with fast-flow quick-connection coupler and dust cap. May be used in any position. Hollow plunger design allows for both pull and push forces.
Country of Origin: Taiwan
Min Ht. 9.75″
Shop Now
-
$1,157.19$1,322.50
Zinko ZRH-302 30 Ton 2.5″ Stroke Hollow Ram- Design for use in a variety of applications where lifting, pushing, bending or holding may be required.
High-strength alloy steel construction. Chrome-plated piston rods resist wear and corrosion. Special bearing design helps prevent galling for long life and trouble-free performance. Polyurethane seals and wipers to reduce contamination, extending cylinder life. Hardened saddles keep top bearing and plunger from jamming. Saddle grooves help prevent slipping. Heavy-duty spring enables consistent fast plunger retraction. All models come with fast-flow quick-connection coupler and dust cap. May be used in any position. Hollow plunger design allows for both pull and push forces.
Country of Origin: Taiwan
Min Ht. 7.03″
Shop Now
-
$1,361.54$1,556.04
Zinko ZR-306A 30 Ton 6″ Stroke Aluminum Cylinder
Light weight and rugged. Built for power & mobility. Designed for use in all positions. Equipped standard with grooved saddles. Steel base-plated for increased durability. All body, base and plunger are hard coat anodized. The highest strengths of aluminum alloys are used and heat treated to provide the maximize combination of strength and fracture resistance.
Country of Origin: Taiwan
Min Ht. 10.79″ MAXIMUM OPERATION: 10,000 PSI
Shop Now
-
$629.09$718.96
These industrial quality, general purpose cylinders are designed for use in a variety of applications where lifting, pushing, bending or holding may be required. Ideal for use in shop, agricultural, automotive/ truck service and construction maintenance.
All Models come with 3/8″ NPT fast-flow quick-connection coupler and dust cap. All cylinders designed with base mounting holes (5/16-18 UNC) Collar plunger threads and base mounting holes provides for easy fixture. Optional adapters make it super easy and cost efficient to convert our 10 ton ram to snap-type or threaded-type applications.
All models are designed for use in any position and feature base mounting holes for easy attachment to almost any fixture.Zinko ZAR-1010T 10 Ton 10″ Stroke Threaded Ram- Cylinder is threaded on both ends for use in many different frame machines, and anywhere a single acting cylinder is needed.
Threaded ends allow use of cylinder with many machines. Chrome-plated piston rods ensure long service life. Polyurethane seals promote high cycle life. Ram half fast flow “quick-connect” couplers included with all rams for fast, easy setup. Heavy duty return springs provide consistent performance.
Special Features:
All models come with either 1/4″ NPT or 3/8″ NPT regular-flow quick-connection couplers and dust caps
10 ton models designed with internal threads on rod end, which can be easily converted for threaded or snap-type application.
Matching base is available upon request
4 ton models come with snap-type inner base
2 ton model comes with flat-type base and screw extension on top
Shop Now
-
$1,166.84$1,333.53
Zinko ZRH-204 20 Ton 4″ Stroke Hollow Ram- Design for use in a variety of applications where lifing, pushing, bending or holding may be required.
High-strength alloy steel construction. Chrome-plated piston rods resist wear and corrosion. Special bearing design helps prevent galling for long life and trouble-free performance. Polyurethane seals and wipers to reduce contamination, extending cylinder life. Hardened saddles keep top bearing and plunger from jamming. Saddle grooves help prevent slipping. Heavy-duty spring enables consistent fast plunger retraction. All models come with fast-flow quick-connection coupler and dust cap. May be used in any position. Hollow plunger design allows for both pull and push forces.
Country of Origin: Taiwan
Shop Now
-
$389.28$444.89
Zinko ZAP-40 40 Cubic Inch Air Pump- Single speed pump, operating at up to 10,000 psi. Operate on ship air to drive a variety of single acting rams, presses and hydraulic pullers.
Operates in any position for ease of use and flexibility. Convenient 360 degree swivel design for better hose control. Exclusive, “air-thrust” design rapidly takes up slack, putting the cylinder rod or tool in work position in seconds. Two models: ZAP-40 for tools and smaller cylinders; ZAP-62 for cylinders as large as 55-Ton capacity. Heavy duty anodized aluminum housing is extremely durable. Portable to any job site equipped with compressed air. Takes the place of manual pumps. Less operator fatigue, more productivity. Compact, light-weight design for easy handling and storage. All-metal air motor for reliability and easy maintenance. Internal relief valve protects system components.
Country of Origin: Taiwan
Shop Now
-
$80.24$91.69
Zinko 195212-6 3/8″ Hose 6′ – 6 Foot Length Hydraulic Hose with 3/8″ NPT Male Ends – 10,000 psi Working Pressure 20,000 psi Burst. Fits all Zinko 3/8″ Couplers.
Country of Origin: Taiwan
Shop Now
High-Performance Tools for Body Shops & Auto Repair Professionals
At KGM Equipment, our mission is to support automotive professionals with tools and equipment that make a real difference in daily shop performance. We understand the demands of a fast-paced shop environment, where efficiency, accuracy, and durability are non-negotiable. That’s why every product in our catalog is carefully selected for its ability to help you work faster, smarter, and with greater precision.
Whether you're engaged in metal fabrication, detailed paintwork, or complex collision repair, we provide the right tools to keep your workflow running smoothly. Our selection includes everything from high-quality specialty accessories to heavy-duty cleaning equipment designed to handle tough jobs. Every item we offer is backed by performance, reliability, and practical value—because we know that in the shop, your tools need to work just as hard as you do. At KGM Equipment, we don’t just supply tools—we deliver dependable solutions that help you achieve better results every time.
Precision Work Made Simple with the Bumper Perfect Hole Punch
One of the most time-saving tools in our catalog is the bumper perfect hole punch. This compact tool is designed to deliver clean, accurate holes in plastic bumpers with minimal effort. Whether you're installing sensors, clips, or mounts, you’ll appreciate the speed and consistency this tool offers.
The bumper perfect hole punch takes the guesswork out of modifying bumpers. It’s ideal for both OEM work and aftermarket installations. Used by body shops nationwide, this tool improves workflow, reduces mistakes, and ensures a professional finish every time. If you're still cutting by hand, this is the upgrade your team will thank you for.
Mobility Matters: The Innovative Truck Bed Dolly
Working on truck beds or large panels? You need a mobile solution that makes handling easier and safer. That’s where the innovative truck bed dolly comes in. Built for strength and maneuverability, it supports heavy components while allowing full access for sanding, painting, or welding.
When it comes to working on truck beds, oversized panels, or heavy vehicle components, mobility can make all the difference. That’s why the innovative truck bed dolly has become an essential piece of equipment in many modern body shops. Designed with both strength and maneuverability in mind, this dolly allows technicians to safely support and move large parts with ease, without compromising stability or access.
Whether you're preparing a surface for paint, performing structural repairs, or welding, the truck bed dolly gives you 360-degree access to the component. This enables a more thorough, efficient, and comfortable workflow. No more bending awkwardly or repositioning heavy parts multiple times. The dolly holds everything securely while letting you focus on precision work.
This tool is especially valuable in collision repair centers, restoration shops, and custom build facilities, where large panels are frequently removed and refinished. By making transport and positioning easier, the truck bed dolly not only increases productivity but also significantly reduces the risk of accidents, strain injuries, and costly damage to freshly painted or prepped surfaces.
With rugged wheels, height adjustability, and a heavy-duty frame, it’s built to handle real shop environments and repeated daily use. When mobility matters and efficiency counts, the truck bed dolly is the tool that helps your team work faster, smarter, and safer.
Hustle Smarter with the Hustler Stick
Every shop needs tools that help technicians move quickly and with precision. The hustler stick is a simple but essential item for guiding panels, adjusting alignment, or maneuvering parts during assembly. Whether you’re doing bodywork or prepping a vehicle for paint, the hustler stick helps you keep control without putting your hands at risk. Its compact size and durable design make it a go-to in any bay where speed and accuracy are key.
Deep Cleaning Power with Steam Jenny Pressure Washers
Cleanliness is a critical part of any auto repair or detailing job. That’s why we stock Steam Jenny pressure washers—trusted for their powerful performance and reliability. Whether you're removing grease, prepping surfaces, or detailing a finished vehicle, these machines deliver serious cleaning capability.
It combines heat and high pressure to tackle the toughest grime without harsh chemicals. They’re ideal for shop use, fleet maintenance, and equipment cleaning, offering the performance professionals need day in and day out.
Equip Your Shop with Tools That Work
At KGM Equipment, we understand the importance of using the right tool for the job. Whether you're investing in a bumper perfect hole punch, rolling in a truck bed dolly, or deep-cleaning with a Steam Jenny pressure washer, you can count on quality, durability, and performance. Explore our collection today and take your shop workflow to the next level—with tools that make every task easier, safer, and more precise.
Frequently Asked Questions
What types of shops benefit from your specialty tools?
Our tools are designed for collision repair centers, auto body shops, restoration facilities, and mobile technicians. Whether you're doing fabrication, paintwork, or detailing, our equipment is built to meet the real demands of professional automotive environments.
What is the bumper perfect hole punch used for?
The bumper perfect hole punch creates precise, clean holes in plastic bumpers—ideal for installing sensors, clips, and mounts. It's a fast, reliable alternative to manual cutting and helps ensure professional, repeatable results every time.
Is the truck bed dolly adjustable or suitable for all truck models?
Yes. Our truck bed dolly is designed for universal compatibility with most truck beds and large body panels. It offers height adjustability and a heavy-duty frame to safely support and move components during repairs, paintwork, or fabrication.
What does the Hustler Stick do?
The Hustler Stick is a lightweight alignment tool used to guide panels, adjust positioning, and maneuver parts during assembly or repairs. It gives technicians better control while keeping hands safe, making it perfect for fast-paced work.
Are Steam Jenny pressure washers safe for auto detailing?
Absolutely. Steam Jenny pressure washers combine heat and high pressure to remove dirt, grease, and debris without using harsh chemicals. They're widely used for auto detailing, fleet cleaning, and shop maintenance due to their effectiveness and reliability.
Can your support team help me choose the right tool for my shop?
Yes. Our experienced team is available to help you choose tools that match your workflow, budget, and shop needs. Whether you're expanding or upgrading, we’ll guide you to equipment that delivers real value and performance.
