-
$9,000.00used pro spot i4s- Spot welder
What’s Included:
- Brand new stitch electrode (replaced missing part)
- Two-pack wheelhouse electrodes for long-term use
- New electrode pliers
- Locking wrench
- Spot hammer tips
- Extra caps
- Full set of maintenance tools
We can ship this unit anywhere in the United States.
Give us a call at 508-397-6284 to speak with a team member about purchasing this unit and reviewing shipping options. We can pallet, strap, and prepare this welder for transport to any location.
Visit us online at WWW.KGMEQUIPMENT.COM for more equipment and information.
-
$34,900.00TITANUM PANTHER EXPRESS
-
$45,000.00
$65,000.00EURO-LINER FRAME MACHINE-INDUSTRY LEADING 10,000 LB LIFTING CAPACITY
Specifications:
• Minimum Height: 15 inches
• Maximum Height: 48 inches
• Overall maximum height with towers attached: 108 inches (9 ft.)
• Tower Height: 60 inches plus (height extensions included)
• Tower Length: 52 inches (4.3 ft.)
• Tower Height with Extension: 90 inches
• Rack Length: (w/o tower & ramps): 18 ft.
• Rack Length (w/tower & ramps): 24.4 ft.
• Rack Width (w/o ramps): 46 inches
• Rack Width (w/ramps): 82 inches
• Ramp Width: 17.75 inches
• Weight of Rack: 3000lbs.
• Maximum Lift Capacity: 10,500 lbs.
• Power required: 110v single phase 25-30 amp dedicated service
• Minimum Compressed Air: 110 psi
• Maximum Compressed Air: 145 psi
• Hydraulics for Lift: TITANIUM Electric Hydraulic System
• Hydraulics for Towers: SPX Power Team 10 ton foot pump
• Hydraulics for Towers: TITANIUM 10 ton 10 inch stroke ram
• Tower Pulling Force: 10 Ton
• 360 Degree Pulling Capacity: Yes
• Above Ground or In Ground Installation: Yes
• Designed for In Ground Pit InstallationPackage includes:
• TITANIUM Euro-Liner 18 ft. Bench Rack
• TITANIUM electric hydraulic system, control cabinet including hand pendant (for raise & lower)
• (2) SPX Power Team 10 Ton foot pumps (for towers)
• (2) Ten ton towers loaded with TITANIUM 10 ton 10 inch rams
• (2) Grade 100 high alloy pull chains w/forged slip hooks
• (10) Floor anchor bolts
• (5) Down pull assemblies
• (2) Removable zinc coated drive on ramps
• (4) Heavy duty forged pinch weld clamp assemblies
• (4) Truck anchor clamps
• (2) Pillar jacks w/mounting adapters -
$2,739.00EZ Roller Spinner Heavy Duty Mobility Package – (4) 22″ & 25″ wheels
Each Wheel Features
- Heavy duty wheels equipped with pre-installed roller bearing (see photos)
- Each heavy-duty wheel has a 3,300 lbs. rating
- 2 in 1 Roller wheel transforms into a spinner and stationary Wheel by removing the bolts holding the center.
- 10 Wedge Nuts – serviceable and easy to install
- Super strong spinner ring allows for spinner functionality
- Easy “install and go” feature
- Installation uses OEM bolts and nuts, no need to stock special parts
- Easy to move vehicles without wheels from outside lot into shop
- Lightweight thermoplastic material, makes it easy to pick up and install
- The heavy duty 10 mm steel center hub was designed to handle high impact wrenches, thus preventing over-torqueing
- Wheels have built in spacer, clears all brake calipers.
- 22″ wheels are not recommended for use with vehicles under 6″ Clearance
- 25″ Wheels are recommended for use on vehicles under 6″ Under body clearance
- Works in conjunction with the vehicle’s braking system
- EZ Roller wheel works independent of the braking system when using in the Spinner mode
- All wheels are limited to 5 mph and in shop or storage lot and 2 mph when pushing the vehicle while in Spinner mode.
- Ok to use electric pushers at low speed
- Wheel are not for road use
- 2-year warranty on Roller, 1-year warranty on Spinner ring.
-
$85.00
$95.00Interchangeable Hub Center for Truck – 5T
- SKU:
- EZR-40065
- UPC:
- 3503634142322
- Availability:
- Usually Ships in 24 to 48 Hours
- Manufactured by:
- EZ Roller – Spinner
- Manufactures part #:
- 40065
