-
-
$817.53
$940.16OTC 4105A 10ton Single-Acting Cylinder Ram Assembly 10-1/8″
OTC 4105A 10ton Single-Acting Cylinder Ram Assembly 10-1/8″ – OTC’s design ensures positive, leak-resistant sealing throughout all pressure ranges, yet full piston return characteristics are maintained. Additional bearing surface has been designed into these units to effectively resist the punishing stress exerted by off-center loads. Depending on capacity, this ram can handle a variety of bending and straightening jobs, construction maintenance applications, pressing operations, body and frame straightening, and rear housing and axle correction.
Capacity in Tons: 10 Stroke: 10-1/8″ Oil Capacity (cu. in.): 22.9 Effective Ram Area (sq. in.): 2.236 Tons at 10,000 PSI: 11.2 Spring Return: Yes Height Collapsed: 15 1/2″ Height Extended: 25 7/8″ Piston Protrusion at Collapsed Height: 1 1/16″ Diameter: 2 1/4″ Diameter: 1 5/8″ Piston Thread (N.P.T.): 1 1/4″ Collar Thread (Straight): 2 1/4″-14 Internal Base Thread (N.P.S.M.): 1 1/4″-11 1/2
-
$848.16
$975.38OTC 4082A Ram with Half Coupler
OTC 4082A Ram with Half Coupler
- 4-Ton Hydraulic Ram w/5in. Stroke
- for Collision Repair Sets
- Made in USA One Year Warranty
- Capacity 4Tons- 5″ Stroke.
- Spring Return:
- Height Collapsed: 10-7/8in.
- Height Extended: 15-7/8in.
- Max Operating Pressure: 8950 psi
- Special Order Item
-
$871.80
$1,133.07Dentfix DF-3 Telescopic Measuring Tram 3 to 10.5′ – Made in Switzerland
DentFix DF-3 Swiss Telescopic Tram 3 to 10.5 Feet – For Telescopic Vehicle Dimensioning – Manufactured in Switzerland, this extruded aluminum tram gauge is lightweight yet remains rigid when fully extended. The telescoping design allows for confident one-person operation. Simply extend the tram gauge as much as you need with an instant read out of the measurement through the view window. Standard and metric measurements are read easily through a large display window. Take point-to-point measurement. Tape reads in both metric and NCSCI, American National Standard. Measuring accuracy is +- 1.0 mm. No sections to add up or put together. Includes 2 bullet pointers, 2 right angle pointers, 2-350 mm pointers, and 2 cones for zeroing out larger openings, and a nylon storage bag for both the tram and the accessory pointers. This is a solid tram gauge suitable for multi-person shop use.
-
$875.00
$1,006.25Replacement Chief Frame Machine Pendant Switch assembly – Up & Down
Replacement chief frame machine pendant switch assembly with 30′ Cord for chief phoenix frame machine, this the exact switch used in your chief frame machine and this same as chief part # CK130105 and is a plug and play component, no modifications necessary. This is for the assembly
- Chief frame machine pendant switch assembly for chief phoenix frame machine
- Comes with a 30′ Cord and is pre-wired
- For phoenix frame machine only
- Same switch manufacture
- Works on the chief pendant switch part # CK130105
- Item is plug and play
- No modifications required
- Free ground shipping
-
$895.00
$1,208.25Replacement Chief Frame Machine Tall Anchoring Stands – Single
Replacement Chief Frame Machine Tall Anchoring Stand: Reach New Heights in Vehicle Repairs
Upgrade your existing Chief Frame Machine with our high-performance Replacement Tall Anchoring Stand – engineered to provide you with an additional 4 inches of height, allowing easy access to high-lift vehicles. Comparable to Chief part # 702066, this stand is meticulously designed to deliver precise and efficient performance, enabling you to tackle a wide range of frame repair challenges with ease.
Key Features:
- Enhanced Height Extension: The Replacement Chief Frame Machine Tall Anchoring Stand extends the height of your existing stands by 4 inches, granting you the ability to effortlessly reach high-lift vehicles. Embrace the newfound accessibility and enhance your repair capabilities.
- Seamless Compatibility: This single anchoring stand assembly is designed to work flawlessly with various Chief Frame Machine models, including S-21 & S-21M, EZ-Liner II, Classic & EZ 25, Goliath, Impulse, Impulse E-VHT, Stream Liner, Excelerator, Tital, Fuzion, Signature, Freedom, Grabber ProLiner, Maxima, and Chisum. It fits effortlessly into your setup, offering a perfect replacement for Chief p/n 702066.
- Precision Engineering: Our Replacement Chief Frame Machine Tall Anchoring Stand – assembly ensures precision and reliability, providing you with consistent performance in demanding repair applications.
- Interchangeable Replacement Parts: This stand’s parts are fully interchangeable with Chief p/n 702066, ensuring smooth integration into your existing system. Expect seamless performance and compatibility with this aftermarket solution.
- Non-OEM Aftermarket Excellence: As a non-OEM aftermarket replacement part, our stand stands strong as a reliable and cost-effective alternative to the original. Count on it for consistent performance and durability.
- Convenient Free Shipping: Enjoy a hassle-free experience with our free shipping option, ensuring the swift and secure delivery of the Replacement Chief Frame Machine Tall Anchoring Stand – Single.
Reach New Heights in Vehicle Repairs!
Upgrade your Chief Frame Machine with our Replacement Tall Anchoring Stand and experience elevated performance and accessibility. This stand is the key to efficient repairs on high-lift vehicles and a valuable addition to your frame repair toolkit.
Embrace precision, reliability, and convenience – get your Replacement Chief Frame Machine Tall Anchoring Stand – Single today!
- Compare To Chief p/n 702066 (single only)
- Single (1) Clamp only Assembly
- Works on Chief S-21 & S-21M
- Works on Chief EZ-Liner II, Classic & EZ 25
- Works on Chief Goliath, Impulse, Impulse E-VHT
- Works on Chief Stream Liner, Excelerator
- Works on Chief Tital, Fuzion
- Works on Signature , Freedom
- Works on Grabber ProLiner,
- Works on Maxima and Chisum
- Replacement Parts Interchangeable with Chief p/n 702066
- FREE SHIPPING
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
-
$895.75
$959.96Replacement Chief S21M and Titan Frame Machine Lift Ram
Replacement Chief S21M and Titan Frame Machine Lift Ram, This ram is made in the USA and requires no modifications, Compare to chief part # 601193
- Replaces Chief p/n 601193
- Works with Chief S-21M & Titan Frame Machine
- Made For Dual acting low pressure frame machine
- 10-18″ Stroke 3″ Bore
- 10,000 pound lift capacity
- Made In USA
- 1 Year Warranty
- 100% money back guarantee
- FREE SHIPPING
This is a Non-OEM, Aftermarket, Replacement part that replaces the original that is made in USA
Please call if you have any Questions. -
$917.24Brewco Legend 360 Frame Machine Pendant Switch
Product Description
Brewco Legend 360 Frame Machine Pendant Switch
Introducing the Brewco Legend 360 Frame Machine Pendant Switch, a highly efficient and user-friendly controller designed to operate all hydraulic functions necessary for proper functioning of the Brewco Legend frame machine. This hand-held 3 switch pendant controller offers exceptional durability and convenience, making it an indispensable tool in the collision repair environment.
Key Features:
- Efficient Control: The Pendant Switch enables seamless operation of the lifting, pulling, and clamping systems of the Brewco Legend frame machine, streamlining collision repair processes for enhanced productivity.
- Durable Construction: Crafted from sturdy plastic housing, the Pendant Switch guarantees long-lasting performance, ensuring reliability even in demanding work conditions. The molded hook allows for easy storage when not in use.
- Ample Reach: The switch comes with a 30-foot SOOW flexible cable, providing ample reach to navigate around the frame machine with ease.
- Versatile Connectivity: Equipped with a 30-foot cord featuring a 5-pin connector, the Pendant Switch ensures secure and stable connectivity for smooth and uninterrupted operation. It can also be adapted to work with pumps without 5-pin connectors by removing the 5-pin connector.
- Compatibility: The Pendant Switch is specifically designed to work seamlessly with Brewco Legend frame machines equipped with hydraulic clamping systems, ensuring a perfect fit and reliable performance.
Technical Specifications:
- Product Name: Brewco Legend 360 Frame Machine Pendant Switch
- Control: Hand-held 3 switch pendant controller
- Cable Length: 30 feet with durable and flexible SOOW construction
- Connector: 5-pin connector for secure connectivity
Satisfaction Guaranteed:
We stand behind the quality and performance of our Brewco Legend 360 Frame Machine Pendant Switch. Our 100% satisfaction guarantee ensures your confidence in our product.
Experience efficiency at your fingertips – order your Brewco Legend 360 Frame Machine Pendant Switch today!
For any inquiries or assistance, please do not hesitate to contact us.
Confidently yours,
-
$957.10
$1,100.67American Freedom Frame Machine Lift Ram 10 ton – 16″ Stroke
Replacement signature American Freedom Machine Lift Ram 10 Ton Ram, this is a 16″ Stroke cylinder with 10,000 psi working pressure, and is a plug and play replacement, and no modifications are required. This ram will work with American freedom frame machines with single and dual rams (uses same ram) and includes threaded ram coupler and hydraulic coupler.
- Works with American Freedom frame machine w/dual & Single lift rams
- Works with American Freedom frame machine
- Works with American Freedom GT frame machine
- Works with Freedom Maxx frame machine
- 10 Ton ram lift capability (per cylinder)
- 10,000 psi working pressure
- Includes hydraulic coupler (is not used on some models)
- Flat Base with Threaded holes (2)
- Plug & Play no modifications needed
- 100% satisfaction guaranty
- FREE SHIPPING
-
$957.10
$1,100.67Blackhawk power pro series Frame Machine Lift Ram 10 Ton – 16″ Stroke
Replacement Power Pro SL & SL HD frame machine lift ram 10 ton ram, this is a 16″ stroke cylinder with 10,000 psi working pressure, and is a plug and play replacement, and no modifications are required. This ram will work with Power Pro machines with single and dual rams (uses same ram) and includes threaded ram coupler and hydraulic coupler.
- Works with Power Pro frame machines w/dual & Single lift rams
- Works With Power Pro SL
- Works With Power Pro SL HD
- Works With power Pro 2000 SL
- Works With power Pro 3000 SL
- Works With power Pro 3000 SL HD
- 10 Ton ram lift capability (per cylinder)
- 10,000 psi working pressure
- Includes hydraulic coupler (is not used on some models)
- Flat Base with Threaded holes (2)
- Plug & Play no modifications needed
- 100% satisfaction guaranty
- FREE SHIPPING
