-
Mo-Clamp 1340 Bolt Puller
MO-Clamp 1340 Bolt Puller – Made for those difficult to get at suspension and frame bolts that need the area they screw into realigned or straightened. Use this for up to a 2.5 ton pull and be certain you are dead center over the bolt area. Uses the oem bolt to pull against the threads with. Just loosen the bolt enough to get the tool cradle under the head and re-tighten a few turns to assure no thread loss and pull away.
Overall length: 6″ (152mm) Capacity 2.5 tons (2.268kg) Made in USA
$79.48$108.14Mo-Clamp 1340 Bolt Puller
$79.48$108.14 -
Mo-Clamp 1350 Versa Hook
MO-Clamp 1350 Versa Hook – The Versa Hook is a versatile tool used as an outer track tie-down to secure vehicles during pulls. It is used as a pulling device for rocker panels, door posts, windshield posts, etc. Original straight-cut tooth design. Versa Hook end is 2-1/2″ wide.
Gripping Surface: 2-1/2″ wide (63 mm), 1″ deep (25 mm) Overall Length: 8″ (203 mm) Width: 2-1/2″ (63 mm) at end Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$216.35$324.49Mo-Clamp 1350 Versa Hook
$216.35$324.49 -
Mo-Clamp 1360 Junior Versa Hook
MO-Clamp 1360 Junior Versa Hook – The Junior Versa Hook is designed smaller to allow body men to get into tighter areas. The Junior Versa Hook end is only 1-3/4″ wide for pulling on rocker panels, door posts, etc. The back lip is used for a tie-down to secure the vehicle during pulls. The narrow width permits use on frame racks with smaller slots. Designed for use with 3/8″ chain.
Gripping Surface: 1-3/4″ wide (45 mm), 1″ deep (25 mm) Overall Length: 9″ (229 mm) Width: 1-3/4″ (45 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$175.83$257.62Mo-Clamp 1360 Junior Versa Hook
$175.83$257.62 -
Mo-Clamp 1450 Numerous Angle Puller
MO-Clamp 1450 Numerous Angle Puller – The NAP allows pulls from any angle. Just put the bolt through a 1/2″ hole and pull. Use with #2100 or #2400 Multi-Adapter Plates, or with back-up plates. Designed for use with 3/8″ chain.
Overall Length: 6″ (152 mm) Capacity: 4 tons (3,629 kg) Replacement Parts: #5245 Nut, Bolt, & Washer Heat Treated Steel. Made in the U.S.A.
$74.81$101.78Mo-Clamp 1450 Numerous Angle Puller
$74.81$101.78 -
Mo-Clamp 1500 Pull Ring
MO-Clamp 1500 Pull Ring – The Pull Ring for the #2100 2MA Adapter Plate for unlimited body and frame pulls, such as frame horns, brackets, cowls, etc. Has recessed pockets to hold bolts stationary for easy, one-handed tightening.
Overall Length: 4-1/2″ (114 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #5350 Nut & Bolt Heat Treated Steel. Made in the U.S.A.
$96.32$131.05Mo-Clamp 1500 Pull Ring
$96.32$131.05 -
Mo-Clamp 1600 Multi-Anchor Hook
MO-Clamp 1600 Multi-Anchor Hook – A valuable, small hook device for use on both conventional frames and unitized bodies. The different ends are used for a variety of pulls and anchoring. The bottom foot can be used with both Mo-Clamp #2100 and #2400 Multi-Use Adapter Plates for strut alignment corrections.
Overall Length: 7-1/2″ (191 mm) Capacity: 4 tons (3,629 kg) Heat Treated Steel. Made in the U.S.A.
$119.25$162.25Mo-Clamp 1600 Multi-Anchor Hook
$119.25$162.25 -
Mo-Clamp 1650 Double Eye Chain Hook
MO-Clamp 1650 Double Eye Chain Hook – A handy chain hook-up pulling plate for making double pulls. The special design allows for both wide or narrow pulls. Double pulls, using multiple self-tightening clamps, can be made from the same pulling tower or pulling post. Features Mo-Clamp easy chain hook-up system. Designed for use with 3/8″ chain.
Overall Length: 6-1/2″ (165 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$146.77$199.69Mo-Clamp 1650 Double Eye Chain Hook
$146.77$199.69 -
Mo-Clamp 1700 Chain Locking Fork
MO-Clamp 1700 Chain Locking Fork – Handy stopper for chain. Used to maintain chain tension while adjusting for pulls. Locks chain tight. Heat-treated alloy steel. Designed for use with 3/8″ chain.
Overall Length: 6″ (165 mm) Capacity: 6 tons (5,443 kg) Heat Treated Steel. Made in the U.S.A.
$103.69$131.67Mo-Clamp 1700 Chain Locking Fork
$103.69$131.67 -
Mo-Clamp 1800 Track Hook
MO-Clamp 1800 Track Hook – Quick tie-down for track systems or back anchoring on frame racks. Lip can be used for pulling damaged areas; varied multiple uses for chain lengthening or shortening. Slot can be used for chain hook-up. Designed for use with 3/8″ chain.
Gripping Surface: 3″ wide (76 mm) Overall Length: 6″ (165 mm) Capacity: 6 tons (5,443 kg) Heat Treated Steel. Made in the U.S.A.
$110.08$149.77Mo-Clamp 1800 Track Hook
$110.08$149.77 -
Mo-Clamp 1850 Inline Slider
MO-Clamp 1850 Inline Slider – New generation of Mo-Clamps. Self-tightening. Made of heat-treated Tru-Tuff steel alloy. Grabs on to flanges and provides a sure grip while pulling “in-line”. Finger grips are cast into the tool to provide easy handling while positioning the clamp.
Gripping Surface: 3″ (76 mm) Overall Length: 7″ (178 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #185005 Jaw “A”, #185006 Jaw “B” Heat Treated Steel. Made in the U.S.A.
$155.59$227.97Mo-Clamp 1850 Inline Slider
$155.59$227.97 -
Mo-Clamp 1900 Quick Hook
MO-Clamp 1900 Quick Hook – Four hole-size selection for quick hook-ups in existing frame holes for pulling of damaged frames. Uses Mo-Clamp’s easy chain hook-up system. Hole sizes: 1-7/8″ (48 mm), 1-5/8″ (41 mm), 1″ (25 mm), 7/8″ (22 mm).
Overall Length: 6-1/2″ (165 mm) Capacity: 4 tons (3,629 kg) Heat Treated Steel. Made in the U.S.A.
$115.58$157.25Mo-Clamp 1900 Quick Hook
$115.58$157.25 -
Mo-Clamp 2100 2Ma Multi-Adapter Plate
MO-Clamp 2100 2MA Multi-Adapter Plate – Designed for most foreign and domestic vehicles with Mac-Pherson suspension, the 2MA fits approximately 95% of the various strut bolt patterns. The 2MA Plate also offers unlimited body and frame pulls with a variety of compatible accessories. Can be used on damage to door posts, frame horns, brackets, cowls, or rear axles. Use a #1450 Numerous Angle Puller (NAP) or #1500 Pull Ring for fast hook-ups and a variation of pulls. Includes three 4-way legs. Large-base legs give good support for pulling, with four hole sizes to accommodate most vehicles.
Overall Length: 9″ (229 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #5230 Bolt & Washer, #9450 Leg, Bolt & Washer Heat Treated Steel. Made in the U.S.A.
$459.03$688.46Mo-Clamp 2100 2Ma Multi-Adapter Plate
$459.03$688.46
