-
Tower Bearing, Outside Wheel Assembly
Tower Bearing, Outside Wheel Assembly
This bearing will work the Following Style Frame machines
- Chief Frame Machine
- Nos (new Old Stock)
- Free Shipping
Special NOTE:
NOTE: We are not a Distributor of Chief Equipment
NOS – was purchased from ex chief distributor and is limited to supply in stock.$138.75$159.56Tower Bearing, Outside Wheel Assembly
$138.75$159.56 -
Tower Ram Flange Washer 1″ Tooth Lock Type
Tower Ram Flange Washer 1″ Tooth Lock Type
- Compare to Chief part # 770147
- Work with tower flange bolt
$7.75$10.46Tower Ram Flange Washer 1″ Tooth Lock Type
$7.75$10.46 -
Tower Roller Bearing – Chief S-21
Tower Roller Bearing – 1-1/4
- Replacement for Chief S-21 Frame Machine ( For Serial # 0- 708) only
- Tower Roller Bearings ( Takes 4 bearings per tower) 1-1/4 Bearings
- compare to Chief Part # 602837
- Includes Dowel Pin
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Origin
$65.00$87.75Tower Roller Bearing – Chief S-21
$65.00$87.75 -
Vac-N-Pull Vacuum Pulling Post
Vacuum pull post comes with a easy hook up for the Electro power built into the rachet pulling device (Electro Power sold Separately)
$1,800.00$1,975.00Vac-N-Pull Vacuum Pulling Post
$1,800.00$1,975.00 -
Washer – Behind Snap Ring- For 5″ Collar Roller Pin
Washer – Behind Snap Ring – For 5″ Collar Roller Pin
Retaining Ring is for chief Tower roller pin
- Works with Chief Roller pin for S21 & S21M, Goliath,
- Roller pin works with Signature & Signature Hybrid Frame Machine
- Replaces Chief Part# 707487
- Pin Is Grooved on both ends and has a 1.240 Diameter
- ( Wheel Sold separately)
- ( Pin Sold separately)
$4.10$5.54 -
Wheel Stands – Set of 2 – Chief Style
Wheel Stand – Set of 2, These wheel stands work with most all vehicles and are perfect for use with Frame repairs and has many other uses. You can compare these to chief part # 674507 Stands
- Compare to Chief Part # 674507
- Set of 2 wheel stands
- Universal Set Fits and works with most frame machines
- Universal Set Fits and works with most car and trucks
- Free Shipping
This is a Non-OEM, Replacement Part That Replaces Original
$406.25$548.44Wheel Stands – Set of 2 – Chief Style
$406.25$548.44 -
Winch Hoist 1760 LBS 110V w Extra long pendant – Collision and Automotive
14′ long control pendant, extra long remote pendant
- 1760 lbs Load Capacity: This garage lifting machine can easily lift small engines, transmissions, large workshop tools, or construction supplies. Capacity: 880 lbs (Single Line), 1760 lbs (Double Lines).
- Powerful Motor: The high-quality copper motor provides 1450W of strong power, which can withstand large forces without causing deformation of the electric winch. In addition, the large cooling fan can quickly cool the machine to avoid overheating. Therefore, this powerful motor ensures efficient operation and saves you more time and energy.
- Convenient to Install: It can be directly hanged on the ceiling using metal or solid wooden strips. Moreover, it is equipped with an emergency stop switch and electromagnetic braking system to avoid abnormal sliding.
- Remote Control: Wired remote control is achieved through the switch of a controller on the cable installed on the machine. The length of the extended cable is approximately 14ft, allowing you to operate within a secure distance.
- Multiple Uses: It is widely used in garages, factories, warehouses and families, as well as professionals and amateurs; Suitable for repairing ships, cars, lawn mowers, golf carts, home decor, engines, boulders, trees, etc.
- Lifting Load Capacity
- 1760 lbs / 800 kg
- Lifting Height (Single Cable)
- 40 ft / 12 m
- Lifting Speed (Single Cable)
- 33 ft/min
- Motor Power
- 1450W
- Voltage
- 110V
- Cable Size
- Φ5mm*L12m (19 Strands)
- Product Dimensions
- 16.1 x 5.9 x 7.1 inch / 410 x 150 x 180 mm
- Product Weight
- 40.23 lbs / 18.25 kg
$336.00$339.00 -
Winch Hoist 1760 LBS 110V with Remote – Collision and Automotive
This winch / Hoist has a hefty 1760LBS Load Capacity, hoist lifts small Truck beds, engines, transmissions. Lift includes Snatch block, 40′ of steel cable, weight is 880 lbs to 1,760 lbs lifting and you can double that when using the included snatch block. This is a 110v power unit and comes with a standard USA plug and is a remote controlled with 4-3/4 pendant switch. This is an awesome product when using as a bed lift or engine and transmission removal and be used with cherry picker or engine removal crane.
Specifications
- Winch / Electric Hoist lifting capacity 1760LBS
- Made with Cast Iron & Aluminum
- Voltage: 110V/60Hz
- Load Capacity: 880 lbs. (Single), 1760 lbs. (Double)
- Cable Length: 40 ft (Single), 20 ft (Double)
- Cable reel speed is 17′ per minute
- Remote Control Cord Length: 4′-3/4″
- 2′ Foot Power Cord
- 3/16′ Strong braided cable
- Item Size: 16-3/4″ x 5.-3/4″ x 10-3/4″
- weight 42 lbs.
- Designed for indoor and outdoor use
$306.00$339.00 -
Zinko 195112-H 3/8″ Hose Half Coupler
Zinko 195112-H 3/8″ Hose Half Coupler – Hose Half Fast Flow Male Coupler with 3/8″ NPTF Female Threads.
Fits all Zinko 3/8″ Industrial Rams, Pumps. Also compatible with all other brand name products.3/8″ NPTF Fast Flow Hose Half Coupler
Weight (lbs) :2.000000
Country of Origin: Taiwan
$32.61$37.27Zinko 195112-H 3/8″ Hose Half Coupler
$32.61$37.27 -
Zinko 195212-6 3/8″ Hose 6′
Zinko 195212-6 3/8″ Hose 6′ – 6 Foot Length Hydraulic Hose with 3/8″ NPT Male Ends – 10,000 psi Working Pressure 20,000 psi Burst. Fits all Zinko 3/8″ Couplers.
Country of Origin: Taiwan
$80.24$91.69Zinko 195212-6 3/8″ Hose 6′
$80.24$91.69 -
Zinko ZA3 Gauge Adapter
Zinko ZA3 Gauge Adapter
Compare to Enerpac GA3
(F)NPT Fitting 3/8″ (M)NPT Fitting 3/8″ Gauge Port (F)NPT 1/4″
Length 5.25″
Works with all 3/8″ NPT connections. Limited flow restriction. High flow rate. Working Pressure 10,000 PSI rated. Square design allows easy connection and disconnection.Country of Origin: Taiwan
$79.84$91.25Zinko ZA3 Gauge Adapter
$79.84$91.25 -
Zinko ZAP-101 100 Cubic Inch Air Pump Single Speed
Air Hydraulic Single Speed Pump. When connected to your shop air lines, Zinko Hydraulic versatile air pumps can safely deliver up to 10,000 psi (700 bar) of hydraulic pressure to cylinders, small presses, and hydraulic tools for lifting, crimping, pipe cutting, pulling, and many other applications.
Special Features:
This model beats the leading competitors in oil flow delivery by as much as 2 to 1, doing more work in less time.
Two stage release mechanism for fast ram return while reducing hydraulic shock.
Operates easily by hand or foot.
Shipped with shipping screw for leak protection, switch to air vent before use to increase performance.
Standard size comes with heavy-duty anodized aluminum reservoir. Aluminum reservoir with see through window, or plastic reservoir will be available upon request. These reservoirs are interchangeable.
More Information
Oil Capacity (in³) :98
Pressure Rating (psi) :10000
Output Flow Rate – No Load (in³/min) :77
Output Flow Rate – Load (in³/min) :13
Air Pressure Range (psi) :40-140
Air Consumption (scfm) :10
Sound Rate (dba) :85
Port Size (NPT) :3/8″
Weight (lbs) :18.000000$449.00$475.13Zinko ZAP-101 100 Cubic Inch Air Pump Single Speed
$449.00$475.13
