-
$48.00
$55.40Chief Frame Machine Pendant Switch – Internal Green Switch
Replacement Chief Frame Machine Pendant Internal Green Switch for a chief phoenix frame machine pendant switch. The Internal Green Switch exact item used in your chief frame machine pendant switch part # CK130105 and is a plug and play component, no modifications necessary.
- Internal Green Switch for chief style pendant control switch
- Factory OEM part used by Chief
- Works on the chief pendant switch part # CK130105
- Item is plug and play
- No modifications required
- Free ground shipping
-
-
$51.00
$58.65Bolt -Tower Ram Flange – Chief
Bolt -Tower Ram Flange w/ Washer
- Tower Ram Flange Bolt
- Works with most Chief and Signature frame machines
- Item as seen in Photo
compare to Chief parts,and Reference # 680616,602619,770147,602619
The nut included will work with OTC, Power Team, Enerpac and similar style ramsReplacement part and Retro kit not made by chief, We are not a Chief distributor.
If you want to pay OEM prices call your local chief Distributor. -
$52.73
$71.18Replacement Tower Lock Pin – For Chief EZ-liner II Frame Machine
Replacement Tower Lock Pin – For Chief EZ-liner II Frame Machine
- Replaces and compares to Chief p/n# 680501
- Works on Chief EZ Liner II, Classic & EZ 25
- Price Is for Qty. of 1
- 3/4″ Round Pin
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
-
$53.00
$71.55Replacement Chief Frame Machine Fastener Bar Plate
Replacement Chief Frame Machine Fastener Bar Plate, 4 Bolt Hole Pattern Drilled in to each – Threaded hole size: 3/4″-10, 3″W x 11-1/2″L, compare to and replaces chief part # 606855
- Replaces and Compares to Chief p/n 606855
- Works on Chief S-21 & S-21M
- Works on Chief EZ Liner II , Classic, EZ-25,
- Works on Chief Titan, Impulse
- Works on Chief Stream liner
- Works on Chisum Signature & Freedom
- Works With Grabber Proline
- Works on Maxima
- Price is for one EACH
- 4 Bolt Hole Pattern Drilled in to each – Threaded hole size: 3/4″-10
- 3″W x 11-1/2″L
This is a Non-OEM, Aftermarket, Replacement Part That Replaces original
-
$53.42
$68.93Dentfix DF-504 Four Finger Bear Claw
The Dent Fix four-finger claw is ideal for hand pulling creases across a door. The unique finger design allows the deepest part of the panel to be pulled first, creating an even pull. As the damage is relieved, the rest of the fingers start to pull. Over pulling is a thing of the past.
-
$54.00
$72.90Replacement Chief Tower Roller Bearing – EZ Liner II & S21
Replacement Chief Tower Roller Bearing – EZ Liner II & S21
- Replacement Tower Bearing for Chief Ez Liner II Frame Machine
- Requires 4 bearings per Tower
- Replaces Part Chief Part # 601770
- Note This Bearing works on S-21 Frame machine with Serial # 709 Or Higher )
- Bearing is 1-1/8
- works on Chief Ez Liner II- Classic- Titan- & S21 Frame machines
- Includes 5/16 x 1 Dowel Pin
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
-
$56.00
$64.40Chief Frame Machine Pendant Switch – Lock Release Switch
Replacement lock release switch for a chief phoenix frame machine pendant switch. The rotary selector exact item used in your chief frame machine pendant switch part # CK130105 and is a plug and play component, no modifications necessary, this is your lock release selector switch.
- Lock release Switch for chief style pendant control switch
- Switch is the lock release switch of frame machine
- Factory OEM part used by chief
- Works on the chief pendant switch part # CK130105
- Item is plug and play
- No modifications required
- Free ground shipping
-
$56.10
$75.74Chief Frame Machine Hydraulic Seal Kit – S21, EZ liner II, Classic
This Seal kit for Chief Frame Machine Towers and Auxiliary Hydraulic rams kit will work with the S21 and EZ-Liner II Towers, auxiliary rams, and S21 Lift ram. This seal kit Contains: (1) U-Cup seal, (1) Steel slip retainer, (1) Steel snap ring, (1) Piston rod wiper and (2) copper compression seals. The 5 & 10 Ton chief frame machines use the same seal kit on tower, and auxiliary rams. This Kit contains the OEM Rubber U-Cup Seal designed for these machines hydraulics.
- Chief EZ Liner II and S21, standard 5 & 10 ton towers
- Star-A-Liner/Cheetah 10 ton tower rams
- 100% satisfaction guarantee
1.) We are the only supplier who provides a steel retainer u-cup with this kit. 50-60% of all Chief rams will need this part.
2.) Note: This Seal kit will not work on the EZ-liner & Classic lift 5 Ton ram seals See part # 685611
3.) Note: Chief has 2 models of the S21, and this kit will not work with S21-M Frame machines
4.) Properly Identify your machine prior to purchase !
5.) If you have question or need assistance please contact us before purchasing
-
$59.00
$79.65Chief Frame Machine Crossmember Lock Plate -S21
Chief Frame Machine Crossmember Lock Plate -S21 and S21M, This is a perfect match to the original and works with out and modifications
- Compares to and Replaces Chief Part # 606539
- Works on Chief S-21 & S-21M
- Works on Chief Titan, Impulse
- Works on Chisum Signature & Freedom
- Works With Grabber Proline
- Works on Maxima
- Price is For qty: 1
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
-
$59.20
$79.92Replacement Tower Lock Pin – For Chief S21 Frame Machine
Replacement Tower Lock Pin – For Chief S21 & S21M Frame Machines, Compare to and Replaces Chief p/n 618708
- Works on Chief S-21, S-21M, Titan, & Standard Frame machines
- Works on Signature Frame machines
- Works on Chisum Signature & Signature GT frame machines
- Price Is for Qty. of 1
- 1″ Round pin
- For Front Towers only.
- Measure your Old Pin and Compare.
- NOTE: DOES NOT work on EZ Liner II or EZ 25 frame machine
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original
