-
$26.88
$34.03Dentfix DF-1680T 8.0mm Titanium Coated Spot Weld Drill Bit – Germany
DentFix DF-1680T
8.0 mm Titanium Coated Spot Weld Drill Bit – Germany –
8.0mm or 5/16th is the most common size
For use with DF-15
Titanium coatings help prevent the bit from dulling due to overheating.
Twist same size as the shank – 8.0mm and a flat spot for use with DF-15 spot drill
specifically designed for the abuse of spot weld drilling
.Flat ground for strength, centering nib to prevent walking.
Bitsavailable in 3 sizes, 6.5, 8.0 and 10.0 mm.
bits are 45mm long and work with all brands of spot-weld drills
These Cobalt high-speed steel mix bits are 45mm long and work with all brands of spot-weld drills.
Titanium (gold color) is a heat resistant coating that extends drill life by about 50%.
Our most popular spot weld drill bit. -
$287.80
$383.73Dentfix DF-595IICH Complete Weld Cable for Shark II
DentFix DF-595IICH Complete Weld Cable for Shark II – **Note: if internally wired, specify “Old-Style”. Handle and switch included.
This cable will also work with MAXI II, but you will have more options with the MAXI II cable – see DF-505CH.
-
$176.85
$235.80Dent Fix DF-595IIR Relay For Circuit Board
Dent Fix DF-595IIR
Relay for circuit Board
Board Not included
Relay Bolt to board as shown in Photo
For model# 595II
Free Shipping -
$4,386.64
$4,984.81DentFix DF-EZN1G EZ Nitrogen Plastic Welder – Generator
The DF-EZN1G EZ Nitro Plastic Welder Generator eliminates the need for refilling nitrogen tanks and has a smaller footprint taking up less space in the shop thanks to its onboard nitrogen generator. The proprietary Flow Adjust Switch Technology (FAST) system makes the DF-EZN1G the easiest nitrogen welder to learn and use. It simplifies nitrogen welding and eliminates flow adjustments by the user. This significantly reduces the time to set up the welder and gets the work done FAST.
Equipped with two welders, the DF-EZN1G EZ Nitro Generator incorporates both a nitrogen welding torch and an airless welding torch. The nitrogen torch is air cooled. It is essential to establish and maintain air flow before turning the welder on, and air flow must be maintained until the nitrogen torch cools down. (Usually 10 minutes to cool down after powering down)
The unit comes with plastic rod in various types and sizes to enable the user to weld different types of plastic and different types of damages. Also included is a roll of aluminum tape to hold parts together when welding. The hand seaming tool help shapes, flatten, and insure that repaired flanges and tabs are the correct thickness.
The cart is equipped with a heat gun holster, and a power strip for powering other tools.
The welder uses 110volts and a maximum of 10amps, total consumption is a maximum of 600watts. -
$20.19
$25.56Dentfix DF-1465 6.5mm High Speed Steel Cobalt Spot Weld Drill Bit – Germany
DentFix DF-1465 6.5mm HSCO Spot Weld Drill Bit – Germany – approximately 1/4-inch High Speed Steel Cobalt (HSCO) spot weld bit. The twist is smaller than the shank which is 8.0mm and has a flat spot on it to be tightened into our DF-15 Series Spot Weld Drills. This German made bit may be used with off brand spot weld drills. Our drill bits are specifically designed for the abuse of spot weld drilling. Flat ground for strength, centering nib to prevent walking. Our German made spot weld bits are available in 3 sizes, 6.5, 8.0 and 10.0 mm. These Cobalt high-speed steel mix bits are 45mm long and work with all brands of spot-weld drills. Titanium (gold color) is a heat resistant coating that extends drill life by about 50%.
-
$20.94
$26.51Dentfix DF-503P Pin Electrode for DF-505 Maxi
DentFix DF-503P Pin Electrode for DF-505 Maxi
Welds stud pins to the car panel for pulling to remove dents.
-
$195.38
$260.50Dentfix DF-505CB2 220v Circuit Board for DF-505 Maxi
DentFix DF-505CB2 220 Volt Circuit Board for DF-505 Maxi – circuit board tells the unit to weld, shrink, turn on or off and what the voltage is.
PDF drawing available upon request. -
$19.23
$24.34Dentfix DF-1480 8.0mm High Speed Spot Drill Bit
DentFix DF-1480
8.0mm HSCO Spot Weld Drill Bit
5/16″ High Speed Steel Cobalt (HSCO) spot-weld bit.
Twist same size as shank
fFat spot on it to be tightened into our DF-15 Series Spot Weld Drills.
This German made bit may be used with off brand spot weld drills.
Bit also offered w/ Titanium heat resistant coating as part # DF-1680T.
Bits are available in 3 sizes, 6.5, 8.0 and 10.0 mm.
Bits are 45mm long and work with all brands of spot-weld drills -
$33.16
$41.97DentFix 1610TC 10mm TiCN Titanium Carbo Nitride
DentFix 1610TC 10mm TiCN Titanium Carbo Nitride- 10.0mm or .4 inches. The Titanium Carbo Nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than regular drill bits. The twist is 10mm and the shank is 8.0mm and has a flat spot on it to be tightened into our DF-15 Series Spot Weld Drills. Our drill bits a specifically designed for the abuse of spot weld drilling. Flat ground for strength, centering nib to prevent walking. These German made spot weld bits are available in 2 sizes: 8.0 and 10.0 mm.
-
$54.14
$69.86DentFix WP720 MIG Utility Weld Pliers
DentFix WP720 MIG Utility Weld Pliers – American made and designed for the demanding world of welding. The innovative design provides technicians several time saving features. The groove nose offers superior spatter removal from the welding tip. Other features include gripping teeth for drawing out welding wire, a precision-machined laser heat-treated cutting edge, and dual head for hammering. Easily install and remove bushings, nozzles and tips with the quality MIG Utility Welding Pliers from Dent Fix Equipment.
-
$73.85
$95.29Dent Fix DF-103 Trigger Switch for DF-1 Stud Welder
Dent Fix DF-103 Trigger Switch for DF-1 Stud Welder
-
$35.50
$44.94Dentfix DF-SPD66-10 Cup and Screw for the DF-15 (10 Pack)
This cup and screw attaches to the end of the C-Clamp of the DF-15 Spot Weld Drill Series to protect the C-Clamp.
