-
$1,194.87Shop Now
$1,365.57Zinko ZML-501J 1/2ton Telescopic Transmission Jack
- 1/2-ton capacity is designed for the removal, transportation, and installation of transmissions in passenger cars, vans, and light trucks.
- The telescopic two-stage hydraulic cylinder provides a low pick-up height combined with an extended lifting range for maximum versatility.
- Height range from 38.78 inches to 75.20 inches accommodates vehicles raised on both in-ground and above-ground lifts.
- Foot-operated two-stage hydraulic system enables hands-free operation, rapid lifting, and precise load control.
- Universal adjustable saddle allows accurate positioning and alignment of transmissions during removal and installation procedures.
- Fully adjustable corner brackets provide secure support for a variety of transmission sizes and configurations.
- Integrated safety restraint belt helps secure the load and improve operator safety during lifting and transport.
- Dual release pedal system allows fast lowering without a load and controlled lowering when supporting a transmission.
- Safety bypass protection system helps prevent cylinder damage caused by overload conditions.
- Specially finished ram, pump, and piston components reduce the risk of oil leakage and enhance long-term reliability.
- Four-wheel base design provides excellent stability when handling heavy drivetrain components.
- Locking swivel urethane casters ensure smooth mobility, precise positioning, and secure placement during operation.
- Adjustable saddle cradle and side tilt functions facilitate accurate transmission alignment during installation.
- Ideal for automotive repair shops, fleet maintenance facilities, transmission specialists, and professional service centers.
- Manufactured in Taiwan for trusted quality, durability, and dependable long-term performance.
-
$1,263.29Shop Now
$1,443.75Zinko ZRH-206 20ton 6″ Stroke Hollow Ram
Zinko ZRH-206 20 Ton 6″ Stroke Hollow Ram- Design for use in a variety of applications where lifting, pushing, bending or holding may be required.
High-strength alloy steel construction. Chrome-plated piston rods resist wear and corrosion. Special bearing design helps prevent galling for long life and trouble-free performance. Polyurethane seals and wipers to reduce contamination, extending cylinder life. Hardened saddles keep top bearing and plunger from jamming. Saddle grooves help prevent slipping. Heavy-duty spring enables consistent fast plunger retraction. All models come with fast-flow quick-connection coupler and dust cap. May be used in any position. Hollow plunger design allows for both pull and push forces.
Country of Origin: TaiwanMin Ht. 12.05″
-
$1,271.37Shop Now
$1,452.99Zinko ZR-504A 50ton 4.25″ Stroke Aluminum Single Acting Cylinder
Zinko Aluminum Cylinder is easily carried around and connected to work with any 10,000 psi air over hydraulic pump. These lightweight and rugged cylinders are suitable for almost every heavy lifting situation, in the shop or on the job site.
Special Features:
All models come with 3/8″ NPT fast-flow quick-connection couplers and dust caps.
Made of the strongest aluminum alloys and heat-treated to provide a maximum combination of strength and fracture resistance.
Grooved saddles for stability.
Steel base-plated for increased durability.
Optional valve to control cylinder speed can also be used as shut off valve for temporary load holding.
Optional aluminum base provides extra support and stability for the 50 ton cylinders.More Information
Capacity (Tons) :50
Stroke (in) :4.25
Oil Capacity (in³) :43
Minimum Height (in) :9.29
Maximum Heights (in) :13.22
Outside Diameter (in) :5.11
Cylinder Bore Diameter (in) :3.74
Plunger Diameter (in) :3.15
Base to Adv. Port (in) :1.18
Saddle Diameter (in) :1.96
Weight (lbs) :29.000000 -
$1,361.54Shop Now
$1,556.04Zinko ZR-306A 30ton 6″ Stroke Aluminum Cylinder
Zinko ZR-306A 30 Ton 6″ Stroke Aluminum Cylinder
Light weight and rugged. Built for power & mobility. Designed for use in all positions. Equipped standard with grooved saddles. Steel base-plated for increased durability. All body, base and plunger are hard coat anodized. The highest strengths of aluminum alloys are used and heat treated to provide the maximize combination of strength and fracture resistance.
Country of Origin: Taiwan
Min Ht. 10.79″ MAXIMUM OPERATION: 10,000 PSI -
$1,365.41Shop Now
$1,560.47Zinko Zml-500 1/2ton Transmission Jack
- 1/2-ton capacity is designed for the removal, transportation, and installation of transmissions in passenger cars, vans, and light trucks.
- The two-stage hydraulic cylinder provides a low pick-up height while delivering an extended lifting range for versatile service applications.
- Height range from 39.88 inches to 68.89 inches accommodates vehicles raised on in-ground and above-ground lifts.
- Foot-operated two-stage hydraulic system enables hands-free operation, precise load control, and rapid lifting performance.
- Universal adjustable saddle allows accurate positioning and alignment of transmissions during removal and installation.
- Fully adjustable corner brackets help securely support a wide variety of transmission sizes and configurations.
- Integrated safety restraint belt secures the load and enhances safety during lifting and transport.
- Dual release pedal system provides fast lowering when unloaded and controlled lowering when carrying a load.
- Safety bypass mechanism helps prevent cylinder damage caused by overloading.
- Specially finished ram, pump, and piston components reduce the risk of oil leakage and improve long-term reliability.
- Four-wheel chassis design delivers excellent stability while supporting heavy drivetrain components.
- Locking swivel urethane casters provide smooth mobility, precise positioning, and secure placement during operation.
- Adjustable saddle cradle and side tilt functions allow accurate transmission alignment during installation procedures.
- Ideal for automotive repair shops, fleet maintenance facilities, and professional transmission service centers.
- Heavy-duty construction ensures dependable performance, durability, and long service life in demanding workshop environments.
-
$1,400.70Shop Now
$1,600.80Zinko ZSJ-50H 5ton Heavy Duty Service Jack
The Zinko ZSJ-50H 5 Ton Heavy Duty Service Jack is built for lifting heavier vehicles with stability and control. It is ideal for demanding service environments.
Product Highlights
- 5 ton lifting capacity
- Heavy-duty service jack design
- Suitable for larger vehicles
- Strong and stable lifting
- Durable construction
- Easy to use
- Reliable performance
-
$1,503.88Shop Now
$1,718.71Zinko ZRH-306 30ton 6.13″ Stroke Hollow Ram
Overview
These General Purpose Hollow type Cylinders of our store are designed for use in a variety of applications where lifting, pushing, bending or holding may be required.Ideal for use in shop, agricultural, automotive/truck service, and construction maintenance.
Special Features:
High-strength alloy steel construction.
Chrome-plated piston rods resist wear and corrosion.
Special bearing design helps prevent galling for long life and trouble-free performance.
Polyurethane seals and wipers to reduce contamination, extending cylinder life.
Hardened saddles keep top bearing and plunger from jamming.
Saddle grooves help prevent slipping.
Heavy-duty spring enables consistent fast plunger retraction.
All models come with fast-flow quick-connection coupler and dust cap.
May be used in any position.
Hollow plunger design allows for both pull and push forces.
More Information
Capacity (Tons) :30
Stroke (in) :6.10
Oil Capacity (in³) :44.06
Cylinder Effective Area (in²) :7.22
Minimum Height (in) :13.00
Maximum Heights (in) :19.10
Outside Diameter (in) :4.50
Weight (lbs) ;45.000000 -
$1,505.23Shop Now
$1,720.26Zinko ZJJ-1513 15ton 5″ Stroke Journal Mechanical Jack
- 15-ton lifting capacity provides dependable lifting power for industrial machinery, equipment positioning, and maintenance applications.
- 4.92-inch stroke length delivers precise lifting and load adjustment for a wide range of heavy-duty tasks.
- Beveled ring gear and precision-forged pinion design provide superior tooth engagement for smooth, efficient power transmission.
- Shifted tooth form construction ensures strong gear interlocking and enhanced operational reliability under load.
- Unique bearing construction promotes smooth horizontal movement and extends service life in demanding applications.
- Chrome-molybdenum steel lifting screw offers exceptional strength and durability to withstand excessive loads.
- A special ratchet handle mechanism allows smooth and controlled lifting with reduced operator effort.
- Nickel-chrome wheel and plunger assembly enhances durability and provides reliable long-term performance.
- Self-locking buttress thread design prevents load creep and maintains secure load positioning under pressure.
- Operates vertically or laterally for versatile use across various industrial lifting and positioning applications.
- Compatible with optional traversing bed for specialized lateral movement requirements.
- Minimum height of 10.04 inches allows operation in applications with limited starting clearance.
- Maximum lifting height of 14.96 inches provides effective load elevation and positioning capability.
- Heavy-duty mechanical construction eliminates reliance on hydraulic systems while ensuring consistent performance.
- Ideal for machinery installation, plant maintenance, construction projects, shipyard operations, and industrial equipment handling.
- Manufactured in Japan for superior engineering quality, durability, and dependable long-term operation.
-
$1,531.95Shop Now
$1,750.80Zinko ZASJ-50M 5ton Air Hydraulic Service Jack
- Professional 5-ton air hydraulic service jack designed for heavy-duty automotive, truck, and agricultural equipment lifting
- Ideal for use on:
- Cars & SUVs
- Light & Medium-Duty Trucks
- Agricultural Equipment
- Commercial Vehicles
- Fleet Service Applications
- Dual-operation design allows the jack to be operated manually or pneumatically for maximum versatility
- Push-button air control provides fast, effortless lifting when connected to shop air
- Pneumatic system operates with 90–140 PSI air pressure for efficient performance
- Heavy-duty steel frame construction ensures durability and long service life
- Extra-long, low-profile chassis easily reaches under low-clearance vehicles and equipment
- Large lifting saddle provides secure load support and enhanced stability during lifting operations
- Quick-lift foot pump rapidly raises the saddle to the load contact point
- Full-swivel rear caster wheels allow smooth maneuverability and precise positioning
- Removable push-button control unit enables operators to monitor loads from multiple angles during operation
- Large release knob provides smooth, controlled lowering of the load
- Built-in safety features help ensure safe and reliable lifting performance
- Designed for demanding workshop, fleet, and agricultural maintenance environments
-
$1,546.14Shop Now
$1,767.01Zinko ZRM-100 100ton 0.63″ Stroke Super Low Cylinder
The Zinko ZRM-100 100 Ton 0.63 Stroke Super Low Cylinder is designed for extreme lifting in very tight clearance conditions. Its ultra-low profile allows operation where standard cylinders cannot fit.
Product Highlights
- 100 ton capacity
- 0.63 stroke super low cylinder
- Ultra low profile design
- Ideal for tight clearance applications
- Suitable for heavy industrial use
- Strong and durable construction
- Reliable performance
-
$1,599.81Shop Now
$1,828.36Zinko ZRDH-307 30ton 7″ Cylinder
Zinko ZRDH-307 30 Ton 7″ Cylinder- Design for use in a variety of applications where lifing, pushing, bending or holding may be required.
Double acting design for greater speed and positive control. Interfaces with automated operations. 3/8″ fast flow couplers included on all models. Threaded collar along with hollow plunger design allows for both pull and push forces. Baked enamel finish for increased corrosion control. Removable hardened saddles protect plunger during lifting and pressing. Built in safety valve prevents accidental over-pressurization. Plunger wiper seals reduce contamination, extending cylinder life.
Country of Origin: Taiwan -
$1,600.20Shop Now
$1,828.80Zinko ZAml-502 1/2ton Air Hydraulic High Lift Transmission Jack
- Professional 1/2-ton air hydraulic transmission jack designed for transmission installation and removal
- Ideal for servicing:
- Passenger Cars
- SUVs
- Vans
- Light Trucks
- Dual-performance operation allows use with compressed air or manual hydraulic pumping
- Special 2-stage telescopic design provides a low pickup point with extended lifting height
- Perfect for vehicles raised on 2-post, 4-post, in-ground, or above-ground lifts
- Foot-operated release valve allows hands-free lowering while guiding the load safely
- Built-in safety bypass and overload protection system prevents operation beyond rated capacity
- Fully adjustable universal saddle accommodates a wide variety of transmission configurations
- Adjustable corner brackets and safety chain help secure the transmission during service
- Chrome-plated telescopic rams provide smooth lifting and corrosion resistance
- Heavy-duty wide-leg base design ensures excellent stability under load
- Equipped with swivel caster wheels for easy maneuverability and positioning
- Integrated push handle allows effortless movement around the workshop
- Designed for professional automotive repair and transmission service applications
