-
-
Mo-Clamp 0804 Pull Plate for Tac-N-Pull 4″
MO-Clamp 0804 Pull Plate for Tac-N-Pull 4″
$12.77$16.22Mo-Clamp 0804 Pull Plate for Tac-N-Pull 4″
$12.77$16.22 -
Mo-Clamp 0305 Dyna-Mo Jr Clamp
MO-Clamp 0305 Dyna-Mo Jr Clamp – New generation of Mo-Clamps. Self-tightening. Thin-edged nose for getting into hard-to-reach places. Drop-forged round wedge to keep twist out of chain, aggressive cross-hatch tooth design, spring loaded for easy opening.
$128.73$188.62Mo-Clamp 0305 Dyna-Mo Jr Clamp
$128.73$188.62 -
Mo-Clamp 6381 Mo-Flex Sling 60″
MO-Clamp 6381 MO-Flex Sling 60″ – Mo-Flex slings are extremely flexible to conform more easily to the curve of surfaces being pulled. The protective pad slips around the sling to provide protection to the sling when wrapped around sharp objects.
Overall Length: 60″ Width: 2″ (51mm) Vertical Capacity: 5,300 lbs (2,403kg) Choke Capacity: 4,200 lbs (1,905kg) Basket Capacity: 10,600 lbs (4,807 kg) Made in the U.S.A.
$105.07$142.95Mo-Clamp 6381 Mo-Flex Sling 60″
$105.07$142.95 -
Mo-Clamp 6303 60″ Nylon Sling
MO-Clamp 6303 60″ Nylon Sling – Protects finish from mars.
Overall Length: 60″ (1,525mm) Width: 3″ (76mm) Vertical Capacity: 2.5 tons (2,267kg) Choke Capacity: 2 tons (1,814kg) Basket Capacity: 5 tons (4,536 kg) Replacement Parts: #62101 Clevis Pin, #62102 Rue Clip Made in the U.S.A.
$104.97$142.81Mo-Clamp 6303 60″ Nylon Sling
$104.97$142.81 -
Mo-Clamp 2450 Boltless Strut Tower Puller
MO-Clamp 2450 Boltless Strut Tower Puller – Easy, fast, reliable method for pulling strut towers. Developed for strut towers without bolts, to correct chassis dimensions to factory specifications. Strut tower removal is necessary.
Overall Length: 5″ (127 mm) Capacity: 3 tons (2,722 kg) Replacement Parts: #4051 Eye Nut, #100441 Numerous Angle Puller, #500053 Bolt Heat Treated Steel. Made in the U.S.A.
$268.42$402.58Mo-Clamp 2450 Boltless Strut Tower Puller
$268.42$402.58 -
Mo-Clamp 9450 4 Way Leg with Washer and Bolt for MO-2400
MO-Clamp 9450 4 Way Leg with Washer & Bolt
$121.70$178.32Mo-Clamp 9450 4 Way Leg with Washer and Bolt for MO-2400
$121.70$178.32 -
Mo-Clamp 850019 Thumb Screw for 7000/7001/7050 Trams
MO-Clamp 850019 Thumb Screw for 7000/7001/7050 (Parts Breakdown shown above: Thumb screw is #3-requires Qty of 8).
$1.37$1.45 -
Mo-Clamp 7055 Delrin Cone and Pointer
MO-Clamp 7055 Delrin Cone and Pointer – Made of tough Delrin Plastic. Designed to fit all Mo-Clamp trams including baby tram and #7000. Allows centering of holes for easier one-man tramming on underside of vehicles and engine compartments. Will make sure you are centered on those holes for precise measurements.
Size: 2″ cubed Made in USA
$143.10$209.67Mo-Clamp 7055 Delrin Cone and Pointer
$143.10$209.67 -
Mo-Clamp 850059 8″ Pointer for 7000/7001/7050
MO-Clamp 850059 8″ Pointer for 7000/7001/7050
$88.08$119.84Mo-Clamp 850059 8″ Pointer for 7000/7001/7050
$88.08$119.84 -
Mo-Clamp 2400 3MA Multi-Adapter Plate
MO-Clamp 2400 3MA Multi-Adapter Plate – Designed for a wide variety of strut towers. Permits fast hook-ups and pulling in any direction. Allows center strut tower measurements with tram gauge instruments. Gives additional versatility for pulling over and around obstructions such as fenders. Also use in conjunction with #1450 Numerous Angle Puller (NAP) to give it even more versatility. Includes three 4-way legs. Large-base legs give good support for pulling, with four hole sizes to accommodate most vehicles.
Overall Length: 9″ (229 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #5230 Bolt & Washer, #9450 Leg, Bolt, & Washer Heat Treated Steel. Made in the U.S.A.
$543.44$815.06Mo-Clamp 2400 3MA Multi-Adapter Plate
$543.44$815.06 -
Mo-Clamp 0750 Lip Grip with Side Pull Bracket
MO-Clamp 0750 Lip Grip with Side Pull Bracket – Multi-purpose clamp with gator teeth for sure, non-slip pulls on any lip. Use the Lip Grip as a sandwich clamp on quarter panels or floor sections. The chain loop permits pulling at any angle. Side pull bracket adds a 90-degree angle for two- directional pulling.
Gripping Surface: 2″ wide (50 mm), 5″ deep (127 mm) Overall Length: 6-1/2″ (165 mm) Capacity: 4 tons (3,629 kg) Replacement Parts: #5225 Nut & Bolt Heat Treated Steel. Made in the U.S.A.
$228.30$342.40Mo-Clamp 0750 Lip Grip with Side Pull Bracket
$228.30$342.40
