-
$51.94
$55.58Accessory Tray for the DF-505 Maxi Dent Puller
The DF-505AT is an Accessory Tray that is a great way to increase the amount of working surface area for your MAXI or EZ Nitro! It mounts securely to the crown of the unit and holds firmly in place to provide more storage area, right by your side. Position consumables and optional equipment (sold separately) on the top of the unit for easy access when working. Each tray adds 50 square inches of work space.
Purchase two Accessory Trays to maximize the amount of work space for your MAXI (Please note they are sold as individual pieces and not as a set).
it is an optional accessory that fits the The MAXI (DF-505/220V & DF-505/110V, sold separately) and EZ Nitro Generator (DF-EZN1G, sold separately Please note it only fits on one side of the unit because the hoses block proper fitment on the other side).
-
$42.00Air-Beat Pulsating Blow Gun by Dentfix
Beat the clock by speeding up clean-up!
The Air-Beat DF-BG603 is a detailer’s ultimate blow gun. The powerful pulsating air action beats the dirt and moisture from fabric and hidden crevasses – interior door, under the hood, and trunk jambs.
Pulsating Action – Blow debris and moisture out of hard-to-reach areas of a vehicle.
Trumpet Cone – Channels the air to cover a wider area than the air being supplied from the compressor.
Ergonomic Grip – Comfortably fits in the palm of the hand with a perfectly positioned top down trigger.
This pocket-sized blow gun will impress the most experienced auto body professional.Specifications
Operational PSI: 60-90PSI – DO NOT Exceed 90 PSI -
$78.73
$99.00Best Glue Tab & Dent Pulling Kit 15 Piece
Best professional Glue tab and PDR pulling kit 15 Piece with pull rods. Great glue tabs for paintless dent repairs and heavy duty repairs.
Includes: 14 glue tabs
Includes: 1 pull rod
For heavy duty glue repairs
High visibility orange color
Tough rigid structure
Offered Grade A Tools -
$1,100.40
$1,140.00Big Glue Professional Heavy-Duty Dent Pulling Kit
Key Features:
- Heavy-Duty 28′ Slide Hammer: 3.5 lb weight delivers unmatched leverage for small to major dents in collision repair.
- can be used with hot or cold glue
- Includes 11 premium Pulling Pads & Accessories
- Comes with box of 50 heavy duty hot glue sticks
- Includes 4 threaded pull rods and male thread pull rings for versatile glue tabs.
- Quick-Change locking system securely holds pads in place for rapid swaps
- Versatile panel compatibility Excels on fenders, doors, deck lids, rockers, and rear panels.
- Professional-Grade durability built for daily use in collision repair centers
- Heavy-Duty construction for long-lasting performance.
- Convenient carry case Keeps all components organized
- Our heavy duty glue adhesion on advanced metals like HS steel and aluminum for flawless glue pull repair.
Elevate your shop’s efficiency with the-BG-1000 Big Glue Dent Pulling System—the go-to heavy duty PDR kit for pros who demand precision and power. Order now and transform your dent repairs!
-
$1,407.69
$1,599.65Body Buggy Chassis Roller – 4′
Body Buggy Chassis Roller – 4′ – Quick and safe method to transport disabled vehicles on and off a rack and around the shop or into a paint booth. MADE IN THE USA!
After a simple five minute installation, the unit becomes “part of the vehicle”, negating the need to employ any unstable or dangerous lift points. The included spacer kit allows for the use of original fasteners, alleviating the need for any additional fastener inventory. When installed, the vehicle is easily rolled onto a frame rack, into a paint booth or to storage, out of the way of production. The device can be installed on the front or rear of most any vehicle using the cradle or sub-frame mounting points and hardware. The Body Buggy has a max weight rating of 4,500 lbs and includes a 5 year warranty.
INCLUDED: Main Beam (4 Foot), Wheel Assemblies, Sliding Lock Collars, Mounting Brackets (2 Pairs of different heights), Hitch Pins & Clips, Fitment Pin Spacer, Storage Crate, and 10 pc Spacer Kit.
Free up Rack Space with the patented Body Buggy DF-BB104
-
$1,501.86
$1,706.65Body Buggy Chassis Roller – 5′
Body Buggy Chassis Roller – 5′ – Quick and safe method to transport disabled vehicles on and off a rack and around the shop or into a paint booth. MADE IN THE USA!
After a simple five minute installation, the unit becomes “part of the vehicle”, negating the need to employ any unstable or dangerous lift points. The included spacer kit allows for the use of original fasteners, alleviating the need for any additional fastener inventory. When installed, the vehicle is easily rolled onto a frame rack, into a paint booth or to storage, out of the way of production. The device can be installed on the front or rear of most any vehicle using the cradle or sub-frame mounting points and hardware. The Body Buggy has a max weight rating of 4,500 lbs and includes a 5 year warranty.
INCLUDED: Main Beam (5 Foot), Wheel Assemblies, Sliding Lock Collars, Mounting Brackets (2 Pairs of different heights), Hitch Pins & Clips, Fitment Pin Spacer, Storage Crate, and 10 pc Spacer Kit.
Free up Rack Space with the patented Body Buggy DF-BB105
-
-
$424.48
$565.97Dent Fix AB712 12pc Pom Dolly Set
Dent Fix AB712 12pc Pom Dolly Set – High abrasion resistance & non-corrosive interaction with aluminum.
Made of polyoxymethylene (POM) the DF-AB712 is a set of 12 rigid dollies that are non-marking when impact against metal.
The high abrasion resistance and non-corrosive interaction with aluminum allow technicians to work on the newer automotive models with aluminum panels and hoods.
Also works great with steel panels as well. A blow molded case is included to keep the dollies neat and organized.
Kit includes:Double End Dolly (DF-AB712J)
Tough material with a 70mm diameter convex head and a 65mm wide curved wedge shaped head. I deal for working on lighter sheet metal panels as the material provides a cushioning effect to match the weight of the hammer without stretching.Round End: 2 3/4″ (70mm)
Wedge Edge: 2 1/2″ (65mm)
Length: 7″ (180mmRound Head Chisel Dolly (DF-AB712D)
Long handle and 95mm diameter half round head with chamfer on edge. Can reach into narrow openings to reform damaged panels.Head: 3 1/2″
Length: 11″ (280mm)Bolster Head Dolly (DF-AB712C)
Long Handle with a 95mm straight blade chisel head with chamfer on edge, can reach into narrow openings.Head: 3 1/2″ (95mm)
Length: 11″ (280mm)Crease Alignment Tool (DF-AB712B)
Profiles can be laterally arranged with the groove crease. Used mostly for hoods and truck gates.Profile Arranging Block (DF-AB712A)
Works great on heavily distorted areas as well as delicate repairs.Hand Fist + Curved (DF-AB712K)
Used for bumping out roundness, large surfaces and edges.Large Toe Dolly (DF-AB712G)
Works just as well on repair steel and aluminum hoods. Great for skin work.Regular Heel Dolly (DF-AB712F)
Works well on thin sheet metalGeneral Purpose Dolly (DF-AB712H)
Comfortable in the hand during the heaviest blows.Block Dolly (DF-AB712I)
2 uniquely shaped sides for general metal shaping.Curved Dolly (DF-AB712E)
Slapping spoonWedge Dolly (DF-AB712L)
Curved face for curved sections.90 day warranty. Sold as a set, pieces not sold individually.
-
$73.85
$95.29Dent Fix DF-103 Trigger Switch for DF-1 Stud Welder
Dent Fix DF-103 Trigger Switch for DF-1 Stud Welder
-
$190.85
$254.47Dent Fix DF-595IICB Circuit Board
Dent Fix DF-595IICB
Circuit Board
Relay Not Included
Relay Bolts to Board Part# df-595IIR
For model# 595II -
$176.85
$235.80Dent Fix DF-595IIR Relay For Circuit Board
Dent Fix DF-595IIR
Relay for circuit Board
Board Not included
Relay Bolt to board as shown in Photo
For model# 595II
Free Shipping -
$75.71
$100.94Dent Fix DM510DBY PDR Striped Yellow Ding Board
Dent Fix DM510DBY PDR Striped Yellow Ding Board
