-
$18.75
$23.73Dentfix DF-1780T 8mm HSCO Spot Weld Drill Bit Titanium Coated
DentFix DF-1780T 8 mm HSCo Spot Weld Drill Bit Titanium Coated – Specifically designed for the rigors of spot weld drilling, these Germany made bits can be used with any 3/8-inch drill. Centering nib prevents bit from walking. Sold individually.
-
$254.35
$339.13Dentfix DF-509 Storage Stand for the DF-505
-
$140.36
$187.14Dentfix DF-Z010B Tornador Pulse Cleaner with Brush and Reservoir
DentFix DF-Z010B Tornador Pulse Cleaner with Brush & Reservoir – Powerful compressed air pulses create agitate dirt and debris free. Works much like a pressure washer. Vaporizes detergent to reach the smallest dust & particles. Cleans in the tightest spaces cleaning cracks and crevices. Utilize wet or dry with or without detergent. Connects to an air hose. Use in well ventilated areas as cleanser will be vaporized, Use of non-toxic cleanser recommended. Use appropriate cleanser for situation.
-
$301.98
$402.64Dentfix DF-3TC3A Short Telescoping Measuring Tram Gauge (Mechanical) 3 Meters
DentFix DF-3TC3 Short Telescoping Measuring Tram Gauge – Telescopic measuring trams are great for writing estimates or to quickly spot check a frame pull. No need to set up a complicated bench measuring system or mount the car on a rack. With Two 350mm (13.75 Inches) Long pointers.
Extend out only as much tram as is needed. No need to add up sections, the internal tape reads out through a display window. Extruded aluminum sections make this tram light weight yet rigid when fully extended. Measures 28″ to 9′. With Two 350mm (13.75 Inches) Long. -
$25.63
$32.44Dentfix DF-C381250 Kool-Cut Sander Discs 5″ 50 Grit, 10/Box
DentFix DF-C381250 5″, 50 GRIT Aluminum Zirconia Resin Fiber Discs for the Hilton Kool Cut Sander
-
$10.12
$12.81DentFix 609/DL Dismounting Lever, Wedge Scraper
DentFix 609/DL Dismounting Lever, Wedge Scraper
-
$28.67
$36.29Dentfix DF-508TK Half Pound Thick Wiggle Wire .093 Gauge
DentFix DF-508TK Half Pound Thick Wiggle Wire .093 – approximately 15 pieces
-
$25.63
$32.44Dentfix DF-C381236 Kool-Cut Sander Discs 5″ 36 Grit, 10/Box
DentFix DF-C381236 Aluminum Zirconia Resin Fiber Discs for the Hilton Kool Cut Sander
-
$25.63
$32.44Dentfix DF-C381224 Kool-Cut Sander Discs 5″ 24 Grit, 10/Box
DentFix DF-C381224 Aluminum Zirconia Resin Fiber Discs for the Hilton Kool Cut Sander
-
$28.12
$36.29DentFix 1680TC 8.0mm TiCN Titanium Carbo Nitride
DentFix 1680TC 8.0mm TiCN Titanium Carbo Nitride- 8 mm or .314 inches. The Titanium Carbo Nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than regular drill bits. The twist is 10mm and the shank is 8.0mm and has a flat spot on it to be tightened into our DF-15 Series Spot Weld Drills. Our drill bits a specifically designed for the abuse of spot weld drilling. Flat ground for strength, centering nib to prevent walking. These German made spot weld bits are available in 2 sizes: 8.0 and 10.0 mm.
-
$124.54
$157.65DentFix 1667 6.7mm Tungsten Carbide STC for Usibor
DentFix 1667 6.7mm Tungsten Carbide STC for Usibor- 6.7mm x 80mm drill bit by Dent Fix Equipment is made of tungsten carbide and is designed to penetrate ultra high strength metal panels of Boron and Usibor steel. These metals are usually used in structurally significant areas such as intrusion beams, rocker rails or A- and B-door-pillars. The triple fluted bit is designed to spread torque over a greater surface area and a specialized coating is applied to the bit for friction-free usage. This bit is specifically useful on Mercedes Benz rockers to create holes for riveting on the CL Class.
-
$32.22
$40.78Dentfix DF-BL10A Body Line Marker tool
DentFix DF-BL10A Body Line Marker Tool
Re-create fender curve lines perfectly every time with this tool.
Makes accurate measurements around wheel opening moldings quickly and easily.
