-
DentFix MatchRIGHT MatchHEAD 3 Color Matching Head Lamp
UPC: 811662033400
The MatchRight DF-MR003 MatchHEAD 3 Color LED Head Lamp is a super bright rechargeable head mounted flood lamp. Mounting it on the user’s head, the lamp illuminates whatever area the user is facing but it also frees up their hands to concentrate on performing the task at hand. Motion Sensor Mode allows the user to simply wave their hand in front of the lamp to turn on and off the LED light. An impact and moisture resistant body protects the unit against falls and spills. An adjustable elastic headband with comfortable grips helps keep the lamp in place all day long. The included USB charger is able to charge the unit in 3 hours. On a full charge the MatchHEAD will last for 3 hours.
FEATURES:
Hands Free Operation: Super bright 160 Lumens LED is worn on the users head to light up the area where the user is looking with no need to for an extra helper to hold a lamp or struggling to find a mounting location.
3 Light Colors – 2700K | 4500K | 6500K
Motion Sensor Mode – No need to stumble to find the switch, simply waive your hand in front of the light to turn the lamp on and off.
60° Adjustable Bracket – Easily point the lamp downwards to illuminate the work area below.
SPECIFICATIONS:
Light Source: High CRI 3 Color COB LED
Luminous Power: 160 Lumen
CRI: 96+
CCT: 2700K | 4500K | 6500K
Operating Time: 3 Hours
Battery: Li-Po 3.7V, 1500 mAh, 5.55Wh
Charging Time: 3 Hours
Charging Input: DC 5V 1A
Degree of Protection: IP 65, IK 07
Operating Temp: 15° F to 105° F
Warranty: 1 YearAPPLICATIONS:
Color matching, polishing, detailing, and general shop use.$88.71$112.29DentFix MatchRIGHT MatchHEAD 3 Color Matching Head Lamp
$88.71$112.29 -
Body Buggy Chassis Roller – 5′
Body Buggy Chassis Roller – 5′ – Quick and safe method to transport disabled vehicles on and off a rack and around the shop or into a paint booth. MADE IN THE USA!
After a simple five minute installation, the unit becomes “part of the vehicle”, negating the need to employ any unstable or dangerous lift points. The included spacer kit allows for the use of original fasteners, alleviating the need for any additional fastener inventory. When installed, the vehicle is easily rolled onto a frame rack, into a paint booth or to storage, out of the way of production. The device can be installed on the front or rear of most any vehicle using the cradle or sub-frame mounting points and hardware. The Body Buggy has a max weight rating of 4,500 lbs and includes a 5 year warranty.
INCLUDED: Main Beam (5 Foot), Wheel Assemblies, Sliding Lock Collars, Mounting Brackets (2 Pairs of different heights), Hitch Pins & Clips, Fitment Pin Spacer, Storage Crate, and 10 pc Spacer Kit.
Free up Rack Space with the patented Body Buggy DF-BB105
$1,501.86$1,706.65Body Buggy Chassis Roller – 5′
$1,501.86$1,706.65 -
Dentfix DF-CGS71 Cold Adhesive Glue Slide Hammer Set
DentFix Cold Adhesive Glue Slide Hammer Set DF-CGS71 is a lightweight kit that is a great way for auto body professionals to quickly and safely move large areas of metal efficiently. The kit includes a 2.8 lbs Slide Hammer, 50 grams of Mammoth Tar Cold Glue that provides almost instantaneous, strong adhesion and 4 uniquely shaped tabs. Each tab is aluminum for strength and durability. Tab sizes include: 38mm & 52mm Round Tabs and 22mm x 57mm & 36mm x 80mm Rectangular Tabs.
The composition is durable (with proper use) and can be kept without special storage conditions
Performs without the need for specialized dispensing tools or glue guns
Durable adhesive is reusable up to 1-year and can be washed with soap and water to remove soil or contaminants
Slide Hammer and complete tab kit offers a complete turnkey cold glue pulling solution
The application area of Cold Glue adhesive is very wide, but this product does not solve all the problems that a body repair expert will face.The level of adhesion is different than hot glue. For example if there is complex damage like a sharp crease, Cold Glue will need the assistance of other pulling methods for an optimal repair.
$244.29$309.23Dentfix DF-CGS71 Cold Adhesive Glue Slide Hammer Set
$244.29$309.23 -
Dentfix DF-CGBT Mammoth Tar Black Cold Glue – 50 Grams
DentFix Mammoth Tar Black Cold Glue DF-CGBT is great for quickly and safely moving large areas of metal. Works great with Cold Adhesive Glue Slide Hammer Set DF-CGS71 and Cold Adhesive Glue Pads Kit DF-CGS72 (Both Sold Separately)
The composition is durable (with proper use) and can be kept without special storage conditions
Performs without the need for specialized dispensing tools or glue guns
Durable adhesive is reusable up to 1-year and can be washed with soap and water to remove soil or contaminants
The application area of Mammoth Tar adhesive is very wide, but this product does not solve all the problems that a body repair expert will face.The level of adhesion is different than hot glue. For example if there is complex damage like a sharp crease, Mammoth Tar will need the assistance of other pulling methods for an optimal repair.
$40.57$51.36 -
Body Buggy Chassis Roller – 4′
Body Buggy Chassis Roller – 4′ – Quick and safe method to transport disabled vehicles on and off a rack and around the shop or into a paint booth. MADE IN THE USA!
After a simple five minute installation, the unit becomes “part of the vehicle”, negating the need to employ any unstable or dangerous lift points. The included spacer kit allows for the use of original fasteners, alleviating the need for any additional fastener inventory. When installed, the vehicle is easily rolled onto a frame rack, into a paint booth or to storage, out of the way of production. The device can be installed on the front or rear of most any vehicle using the cradle or sub-frame mounting points and hardware. The Body Buggy has a max weight rating of 4,500 lbs and includes a 5 year warranty.
INCLUDED: Main Beam (4 Foot), Wheel Assemblies, Sliding Lock Collars, Mounting Brackets (2 Pairs of different heights), Hitch Pins & Clips, Fitment Pin Spacer, Storage Crate, and 10 pc Spacer Kit.
Free up Rack Space with the patented Body Buggy DF-BB104
$1,407.69$1,599.65Body Buggy Chassis Roller – 4′
$1,407.69$1,599.65 -
Dentfix DF-GM/DXE GLUEMAX Glue Repair Station
Elevate your Glue Panel Repairs to the MAXIMUM !
The GLUEMAX Glue Repair Station DF-GM/DXE is the ultimate pulling station equipped with both cold and hot glue pulling options. From heavy duty glue GPR pulls to cosmetic PDR corrections this kit has your shop’s needs covered.
APPLICATION
Multiple cold and hot glue pulling options to repair damage in automotive steel and aluminum panels while preserving OEM coatings and interior integrity.FEATURE & BENEFITS
HOT & COLD GLUE – Repair panel damage utilizing the advantages of both methods.
HEAVY DUTY PULLS – Our Xtreme Glue Pulling system allows for powered assisted pulls.
SMALL & DETAIL CORRECTIONS – Ultra Ding Massager Kit for controlled pulls for small areas.
STORAGE & PROTECTION – Enclosed and lock-able cart protects the tools from the shop environment.
INCLUDED IN THE KIT
DF-CGS71 Cold Adhesive Glue Slide Hammer Kit
DF-CGS72 Cold Adhesive Glue Pads Kit w/Cold Glue “Mammoth Tar”
DF-CGLB Arctic Ice Light Blue Cold Glue
DF-GPX Xteame Glue Puller
DF-DM555UDX Ding Massager Deluxe
DF-DM55DE Ding Enhancer Shield
DF-DM510DBY Yellow Ding Board
DF-505BP Bridge Puller
DF-509 9-Finger Bear Claw
DF-504 4-Finger Bear Claw
DF-900TP T-Puller
DF-900LP Leverage Puller
DF-DB79TK Knockdown Tool
DF-935LED LED Ligh$4,395.60$4,995.00Dentfix DF-GM/DXE GLUEMAX Glue Repair Station
$4,395.60$4,995.00 -
Dentfix DF-CGS72 Cold Adhesive Glue Pads Kit
DentFix Cold Adhesive Glue Pad Set with Mammoth Tar DF-CGS72 is a lightweight kit that is a great way for auto body professionals to quickly and safely move large areas of metal efficiently when paired with a slide hammer (not included with this kit).
The kit includes 50 grams of Mammoth Tar Cold Glue that provides almost instantaneous, strong adhesion. Also included in the kit is 4 uniquely shaped tabs and a 4pc Universal PDR Sliding Hammer Adapter Set to adapt this system to a wide variety of slide hammers. Each tab is aluminum for strength and durability. Tab sizes include: 38mm & 52mm Round Tabs and 22mm x 57mm & 36mm x 80mm Rectangular Tabs.
The composition of cold glue is durable (with proper use) and can be kept without special storage conditions
Performs without the need for specialized dispensing tools or glue guns
Durable adhesive is reusable up to 1-year and can be washed with soap and water to remove soil or contaminants
The application area of Cold Glue adhesive is very wide, but this product does not solve all the problems that a body repair expert will face.The level of adhesion is different than hot glue. For example if there is complex damage like a sharp crease, Cold Glue will need the assistance of other pulling methods for an optimal repair.
$183.77$245.03Dentfix DF-CGS72 Cold Adhesive Glue Pads Kit
$183.77$245.03 -
Dent Fix PDR Nibs – Round Pimple – 36mm (10/Pack)
PDR Nibs for glue pulling.
Round shape with pimples for extra grip.
Face of the nib is 36mm.
$18.50$23.13Dent Fix PDR Nibs – Round Pimple – 36mm (10/Pack)
$18.50$23.13 -
Dent Fix PDR Nibs – Rectangle Ridge – 35x24mm (10/Pack)
PDR Nibs for glue pulling.
Rectangle shape with ridges for extra grip.
Face of the nib is 35mm x 24mm.
$18.50$23.13 -
Dent Fix PDR Nibs – Pimple Oval – 34x23mm (10/Pack)
PDR Nibs for glue pulling.
Oval shape with pimples for extra grip.
Face of the nib is 34mm x 23mm.
$18.50$23.13Dent Fix PDR Nibs – Pimple Oval – 34x23mm (10/Pack)
$18.50$23.13 -
$18.50
$23.13Dent Fix PDR Nibs – Spine Oval – 33x23mm (10/Pack)
$18.50$23.13
