Dent Fix DF-595II Hammer Head Dent Removal System –

Replace your stud welder with the 110 volt DF-595ii HammerHead. Same great quality, same essential accessories that provides the technician with the means to higher productivity and better results. It’s like having sticky fingers and being able to pull dent with your hand.

110 Volt
1 year warranty.
60Lbs
Formerly Know as Shark 2 Dent remover (Name changed by Manufacturer)
Included Items:
Weld pin Tip (1), Washer Tip (1), Shrink Tip (1), Wiggle Wire Tip (1), Short Pull Rod (1), Slide Hammer With Rod and Weight (1), Leverage Rod (1), Ground Magnet (1), # Finger Claw, & 1Pound of Wiggle Wire

Made in China. 1 year warranty. Use with a 30 amp breaker.

DentFix DF-900PF Self Locking Alu Pin Finger – an innovative pull finger that attaches to a welded pin for dent pulls on automotive aluminum panels. Simply slide the pull finger over the stud to engage. The slide finger will hold onto the stud until it is disengaged by pressing the release lever. Dent Fix pull fingers are quicker to attach and disengage than screw-on type pull fingers.

Attach a pull devices to the fingers for a reliable and sturdy pull. For crease pulls, multiple pull fingers can be used together when attached to welded studs in a row. A bar can then be fed through the pull finger eyelet and attached to a bridge puller.

Dent Fix’s Pull Finger, when used with Dent Fix Alu-Studs DF-900PS and DF-900PM, is also adjustable. Due to the extra length of the Alu-Stud pin, the pull finger can slide up or down the pin if an adjustment needs to be made mid-pull. This adjustment feature is not available when using screw-on fingers.

Sold individually.

Dentfix DF-AH714 Aluminum Hammers – 3 Piece
Solid Aluminum Hammer Head set with Genuine Hickory Handles.

The DF-505BP Bridge Puller is a great way for techs to perform controlled panel pulls. The Pull Control Wheel allows the tech to add incremental levels of force and lock the pull in that position.

This bridge puller is able to perform steel or aluminum pulls*

Steel:
When using the DF-505 Maxi System you can pull with wiggle wire or weld keys attached to the panel. For the weld keys you will also need the DF-505KEM Magnetic Key Electrode. Simply weld keys (DF-503KF & DF-503KT) in desired location, connect rod through eyelets in the keys, and attached to the Bridge Puller.

Aluminum:
When using an aluminum welder weld M4x12 studs to the panel an attach screw on eyelets to the studs. Install pull rod and bridge puller.

*Please note: Working with tools for both steel and aluminum repairs can contaminate the panels affect paint performance, it is best practice not to use on back to back pulls (steel then aluminum, or vice versa) and if you do, thoroughly clean before transferring to another repair. Even better use the tool on one dedicated metal aluminum or steel not both.