-
$543.56
$724.75Dentfix DF-505BP Bridge Puller
The DF-505BP Bridge Puller is a great way for techs to perform controlled panel pulls. The Pull Control Wheel allows the tech to add incremental levels of force and lock the pull in that position.
This bridge puller is able to perform steel or aluminum pulls*
Steel:
When using the DF-505 Maxi System you can pull with wiggle wire or weld keys attached to the panel. For the weld keys you will also need the DF-505KEM Magnetic Key Electrode. Simply weld keys (DF-503KF & DF-503KT) in desired location, connect rod through eyelets in the keys, and attached to the Bridge Puller.Aluminum:
When using an aluminum welder weld M4x12 studs to the panel an attach screw on eyelets to the studs. Install pull rod and bridge puller.*Please note: Working with tools for both steel and aluminum repairs can contaminate the panels affect paint performance, it is best practice not to use on back to back pulls (steel then aluminum, or vice versa) and if you do, thoroughly clean before transferring to another repair. Even better use the tool on one dedicated metal aluminum or steel not both.
-
$594.61
$792.81Dentfix The Eliminator Deluxe Kit – Inline Undercoat Remover
DentFix DF-700DX The Eliminator Kit – Inline Undercoat Remover – With the Course brush, undercoating and seam sealer are stripped away easily and cleanly, right down to the bare metal. The Brushes do not clog up. Remove rust and scale with the Medium brush and the fine brush is perfect for getting paint out of tight spaces. The geared Decal Eraser will strip a 2 foot by 2 foot decal in less than 2 minutes with no paint burn. The eraser is ideal for removing the adhesive backing on moldings and badges.
-
$595.97Dent Fix AB712 12pc Pom Dolly Set
Dent Fix AB712 12pc Pom Dolly Set – High abrasion resistance & non-corrosive interaction with aluminum.
Made of polyoxymethylene (POM) the DF-AB712 is a set of 12 rigid dollies that are non-marking when impact against metal.
The high abrasion resistance and non-corrosive interaction with aluminum allow technicians to work on the newer automotive models with aluminum panels and hoods.
Also works great with steel panels as well. A blow molded case is included to keep the dollies neat and organized.
Kit includes:Double End Dolly (DF-AB712J)
Tough material with a 70mm diameter convex head and a 65mm wide curved wedge shaped head. I deal for working on lighter sheet metal panels as the material provides a cushioning effect to match the weight of the hammer without stretching.Round End: 2 3/4″ (70mm)
Wedge Edge: 2 1/2″ (65mm)
Length: 7″ (180mmRound Head Chisel Dolly (DF-AB712D)
Long handle and 95mm diameter half round head with chamfer on edge. Can reach into narrow openings to reform damaged panels.Head: 3 1/2″
Length: 11″ (280mm)Bolster Head Dolly (DF-AB712C)
Long Handle with a 95mm straight blade chisel head with chamfer on edge, can reach into narrow openings.Head: 3 1/2″ (95mm)
Length: 11″ (280mm)Crease Alignment Tool (DF-AB712B)
Profiles can be laterally arranged with the groove crease. Used mostly for hoods and truck gates.Profile Arranging Block (DF-AB712A)
Works great on heavily distorted areas as well as delicate repairs.Hand Fist + Curved (DF-AB712K)
Used for bumping out roundness, large surfaces and edges.Large Toe Dolly (DF-AB712G)
Works just as well on repair steel and aluminum hoods. Great for skin work.Regular Heel Dolly (DF-AB712F)
Works well on thin sheet metalGeneral Purpose Dolly (DF-AB712H)
Comfortable in the hand during the heaviest blows.Block Dolly (DF-AB712I)
2 uniquely shaped sides for general metal shaping.Curved Dolly (DF-AB712E)
Slapping spoonWedge Dolly (DF-AB712L)
Curved face for curved sections.90 day warranty. Sold as a set, pieces not sold individually.
