-
$204.43
$299.53Mo-Clamp 0550 Tight Opening Clamp
MO-Clamp 0550 Tight Opening Clamp – Mo-Clamp’s new design Tight Opening Clamp has all the same gripping dimension requirements as the old design. Redesigned and strengthened with our totally new screw drive mechanism. Still a full 3 ton capacity. Still able to reach core support and upper sheet metal areas where no other can. Perfect for small pick-up frame rails.
Gripping Surface: 1½” wide (38 mm), ½” deep (13 mm) Overall Length: 6½” (165 mm) Capacity: 3 tons (2,722 kg) Heat Treated Steel. Made in the U.S.A.
-
$292.50
$438.70Mo-Clamp 0551 Original Tight Opening Clamp
MO-Clamp 0551 Original Tight Opening Clamp – Mo-Clamp’s re-introduced the Tight Opening Clamp due to popular demands for the old design. Still a full 3 ton capacity. Still able to reach core support and upper sheet metal areas where no other can. Perfect for small pick-up frame rails.
Gripping Surface: 1½” wide (38 mm), ½” deep (13 mm) Overall Length: 6½” (165 mm) Capacity: 3 tons (2,722 kg) Heat Treated Steel. Made in the U.S.A.
-
$193.96
$284.19Mo-Clamp 0650 Box Clamp
MO-Clamp 0650 Box Clamp – A must for pulling on box rails with welded-on bumper flanges. Reaches around protruding metal to get a grip on hard-to-reach surfaces. Its heat-treated jaws grip a substantial area for pulls from several directions and angles. Gator tooth design.
Gripping Surface: 2″ wide (50 mm), 2″ deep (50 mm) Overall Length: 10″ (254 mm) Capacity: 4 tons (3,629 kg) Replacement Parts: #5330 Nut, Bolt & Washer Heat Treated Steel. Made in the U.S.A.
-
$146.09
$214.05Mo-Clamp 0655 Dyna-Mo Box Clamp
MO-Clamp 0655 Dyna-Mo Box Clamp – These heat-treated jaws reach around flanges and other obstructions to get a grip on hard-to-reach surfaces. Severe duty tooth design for aggressive pulling power.
Gripping Surface: 1¼” wide (32 mm), ½” deep (10 mm) Overall Length: 8″ (201 mm) Capacity: 3 tons (2,722 kg) Replacement Parts: #9702 Wedge, #5254 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
-
$182.57
$267.50Mo-Clamp 0660 Long Nose Clamp
MO-Clamp 0660 Long Nose Clamp – Similar to the popular #0300 Jr® Clamp, the Long Nose is self-tightening and includes the original wedge. Cross-hatch tooth design, spring loaded for easy opening, deeper reach for hard-to- get-to areas.
Gripping Surface: 1¾” wide (45 mm), 1″ deep (25 mm) Overall Length: 9½” (241 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #9701 Wedge, #5251 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
-
$222.73
$326.35Mo-Clamp 0670 Baby Box Clamp
MO-Clamp 0670 Baby Box Clamp – Self-tightening. Great for single-lip flanges and inside frame horns. Original wedge; cross- hatch tooth design; spring-loaded for easy opening. Throat clearance of 1½” high (38 mm), 1¼” deep (32 mm).
Gripping Surface: 1¾” wide (45 mm), 1″ deep (25 mm) Overall Length: 9½” (241 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #9701 Wedge, #5252 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
-
$255.60
$374.50Mo-Clamp 0680 Big Mouth Clamp
MO-Clamp 0680 Big Mouth Clamp – Self-tightening. A perfect solution for hard-to-get-to areas. Great where large opening is needed. Original wedge; cross-hatch tooth design; spring-loaded for easy opening. Throat clearance of 2¼” high (57 mm), 1¼” deep (32 mm).
Gripping Surface: 1¾” wide (45 mm), 1″ deep (25 mm) Overall Length: 9½” (241 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #9701 Wedge, #5253 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
-
$228.30
$342.40Mo-Clamp 0750 Lip Grip with Side Pull Bracket
MO-Clamp 0750 Lip Grip with Side Pull Bracket – Multi-purpose clamp with gator teeth for sure, non-slip pulls on any lip. Use the Lip Grip as a sandwich clamp on quarter panels or floor sections. The chain loop permits pulling at any angle. Side pull bracket adds a 90-degree angle for two- directional pulling.
Gripping Surface: 2″ wide (50 mm), 5″ deep (127 mm) Overall Length: 6-1/2″ (165 mm) Capacity: 4 tons (3,629 kg) Replacement Parts: #5225 Nut & Bolt Heat Treated Steel. Made in the U.S.A.
-
$175.88
$204.02Mo-Clamp 0800 Tac-N-Pull with Pull Plates
MO-Clamp 0800 Tac-N-Pull with Pull Plates – For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch. Includes two 3″ plates, two 1 1/4″ plates, and two 1″ plates.
Gripping Surface: Up to 3″ wide (76 mm) Overall Length: 5-1/2″ (140 mm) Capacity: 3 tons (2,722 kg)
Replacement Parts: #0801 1″ Pull Plate, #0802 1-1/2″ Pull Plate, #0803 3″ Pull Plate or #0805 Tac-N-Pull Plate Kit (includes ten 1″ plates, five 1-1/2″ plates, and five 3″ plates) Heat Treated Steel. Made in the U.S.A.
-
-
$8.84
$11.23Mo-Clamp 0802 Pull Plate for Tac-N-Pull 1-1/2″
MO-Clamp 0802 Pull Plate for Tac-N-Pull 1-1/2″
-
