-
Mo-Clamp 7055 Delrin Cone and Pointer
MO-Clamp 7055 Delrin Cone and Pointer – Made of tough Delrin Plastic. Designed to fit all Mo-Clamp trams including baby tram and #7000. Allows centering of holes for easier one-man tramming on underside of vehicles and engine compartments. Will make sure you are centered on those holes for precise measurements.
Size: 2″ cubed Made in USA
$143.10$209.67Mo-Clamp 7055 Delrin Cone and Pointer
$143.10$209.67 -
Mo-Clamp 0250 Mini C Clamp
MO-Clamp 0250 Mini C Clamp – Self-tightening. Small, light, versatile. Has a minimum of 1½” (38 mm) throat clearance to reach around flanges, cowls, pinch welds and lips. Butts against panels where only narrow bite is available. 1½” (38 mm) jaws give added grip. Original wedge. Original straight cut tooth design.
$143.53$210.30Mo-Clamp 0250 Mini C Clamp
$143.53$210.30 -
Mo-Clamp 4047 Frame Rack Draw Bar
MO-Clamp 4047 Frame Rack Draw Bar – Great for bolting to a frame, unibody rail or to other places to make a secure pull. Each bar has a combination of hole patterns to facilitate bolting to a vehicle. May be used in conjunction with various accessory items for specialized pulling needs.
Overall Length: 14-1/2″ (368 mm) Width: 2-1/2″ (64 mm) Capacity: 3 tons (2,722 kg) Replacement Parts: #4044 1/2 ” Shackle, #4043 Oval Loop Heat Treated Steel. Made in the U.S.A.
$143.91$210.86Mo-Clamp 4047 Frame Rack Draw Bar
$143.91$210.86 -
Mo-Clamp 1255 Large Panel Puller
MO-Clamp 1255 Large Panel Puller – A perfect companion to the smaller 1250, the large panel puller allows the technician to increase the length of contact when pulling a panel into shape. Made of Mo-Clamp Tru-tuff steel alloy, this tool will last a lifetime and is covered by the Mo-Clamp “Forever” warranty. Use it in any situation where you need to get behind a pull. Made in USA.
Capacity: 3 tons (2,722kg) Length: 9″ (22.86cm) Pulling Surface: 4.75″ (12.06cm)
$144.23$211.33Mo-Clamp 1255 Large Panel Puller
$144.23$211.33 -
Mo-Clamp 6302 30″ Nylon Sling with Pear and Triangle
MO-Clamp 6302 30″ Nylon Sling with Pear and Triangle – Protects finish from mars. Wraps around and protects pillars while spreading the force. Forged pull loops for exceptional toughness.
Overall Length: 30″ (790mm) Width: 4″ (102mm) Vertical Capacity: 2,400 lbs (1,088kg) Choke Capacity: 1,500 lbs (680kg) Basket Capacity: 2 tons (1,814kg) Heat Treated Steel. Made in the U.S.A.
$145.66$213.42Mo-Clamp 6302 30″ Nylon Sling with Pear and Triangle
$145.66$213.42 -
Mo-Clamp 0655 Dyna-Mo Box Clamp
MO-Clamp 0655 Dyna-Mo Box Clamp – These heat-treated jaws reach around flanges and other obstructions to get a grip on hard-to-reach surfaces. Severe duty tooth design for aggressive pulling power.
Gripping Surface: 1¼” wide (32 mm), ½” deep (10 mm) Overall Length: 8″ (201 mm) Capacity: 3 tons (2,722 kg) Replacement Parts: #9702 Wedge, #5254 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
$146.09$214.05Mo-Clamp 0655 Dyna-Mo Box Clamp
$146.09$214.05 -
Mo-Clamp 1650 Double Eye Chain Hook
MO-Clamp 1650 Double Eye Chain Hook – A handy chain hook-up pulling plate for making double pulls. The special design allows for both wide or narrow pulls. Double pulls, using multiple self-tightening clamps, can be made from the same pulling tower or pulling post. Features Mo-Clamp easy chain hook-up system. Designed for use with 3/8″ chain.
Overall Length: 6-1/2″ (165 mm) Capacity: 5 tons (4,536 kg) Heat Treated Steel. Made in the U.S.A.
$146.77$199.69Mo-Clamp 1650 Double Eye Chain Hook
$146.77$199.69 -
Mo-Clamp 3051 T-top Anchor Pot (1 Only)
MO-Clamp 3051 T-Top Anchor Pot – An anchoring system for versatile pulling. Insert 3/8″ frame straightening chain, anchor with lock cap, and pull from any direction or angle. Lock cap keeps out dirt and dust when not in use. Includes sleeve and lock cap. 3-1/2″ (89mm) cored hole required. 3060 Cast-in Model is available for new floors.
Capacity: 10 tons (9,072 kg) Replacement Parts: #300210 Welded Cap Heat Treated Steel. Made in the U.S.A.
$148.28$201.74Mo-Clamp 3051 T-top Anchor Pot (1 Only)
$148.28$201.74 -
Mo-Clamp 6600 Chain Snugger
MO-Clamp 6600 Chain Snugger – Tightens chain when used with a #1700 Chain Locking Fork on frame racks and other applications.
Overall Length: 12″ (305mm) Capacity: 6 tons (5,443kg) Heat Treated Steel. Made in the U.S.A.
$149.06$218.41Mo-Clamp 6600 Chain Snugger
$149.06$218.41 -
Mo-Clamp 0054 Mini Spring Clamp
MO-Clamp 0054 Mini Spring Clamp – Spring loaded for easy opening. Includes Oval Loop for use with Slip Hook for easy hook-up. For light sheet metal in those tight places. Cross-hatch tooth design for an aggressive bite. Clamp has raised “ears” to hold bolts stationary, for easy, one-handed tightening.
$149.06$218.41Mo-Clamp 0054 Mini Spring Clamp
$149.06$218.41 -
Mo-Clamp 4154 Hole Plug and Single Claw
MO-Clamp 4154 Hole Plug and Single Claw – Versatile combination for quick hook-ups and multiple pulls. 18-inches of 3/8″ chain included.
Overall Length: 26″ (672 mm) Working Load Limit: 6,600 lbs Working Load Limit: Refers to the maximum load (rated capability) in pounds that shall be applied in direct tension to a straight length of chain or attachment. NEVER EXCEED THE WORKING LOAD LIMIT of chains or attachments, even when the item is new and the load limit is uniformly applied. Replacement Parts: #5220 Clevis Pin & Rue Clip Heat Treated Steel. Made in the U.S.A.
$149.71$219.35Mo-Clamp 4154 Hole Plug and Single Claw
$149.71$219.35 -
Mo-Clamp 0805 Pull Plate Kit for Tac-N-Pull
MO-Clamp 0805 Pull Plate Kit for Tac-N-Pull – For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch.
- Ten (10) 1″ Pull Plates
- Five (5) 1-1/2″ Pull Plates
- Five (5) 3″ Pull Plates.
The Pull Plate Kit includes: Ten (10) #0801 1″ Pull Plates Five (5) #0802 1-1/2″ Pull Plates Five (5) of #0803 3″ Pull Plates. For use with the #0800 Tac-N-Pull Clamp. (Clamp not included in kit.) Heat Treated Steel. Made in the U.S.A.
$151.36$205.93Mo-Clamp 0805 Pull Plate Kit for Tac-N-Pull
$151.36$205.93
