-
$1,087.97
$1,631.75Mo-Clamp 5050 #5 Tool Board
MO-Clamp 5050 #5 Tool Board with Tools Including:
- #3120 Small Round Nose Sheet Metal Hook
- #3140 Large Round Nose Sheet Metal Hook
- #4043 Oval Loop
- #4044 1/2″ Screw Pin Shackle
- #4052 Triangle
- #4145 Double Grab Hook Assembly
- #4151 Grab Hook and Single Claw with 18″ Chain
- #4152 Two Single Claws with 18″ Chain
- #4154 Hole Plug and Single Claw with18″ Chain
- #6006 3/8″ X 6″ MO-Clamp Chain
- #6220 3/8″ Super Alloy Clevis Grab Hook
- #6250 3/8″ Alloy Clevis Slip Hook
- #6300 Nylon Sling
- #6350 Cable Sling
- #5051 Tool Board with Hooks
-
$1,090.10
$1,634.94Mo-Clamp 7300 Strut Tower Alignment Gauge
MO-Clamp 7300 Strut Tower Alignment Gauge – Measures strut tower height at both forward and aft locations. Determines centerline and locates lower control arm centerline position. Use in conjunction with the #7200 Deluxe Centerline Gauge. Measurements are in metric units. Includes 4″ (102mm) Reverse Cone Pointer, 8″ (203mm) Reverse Cone Pointer, 4″ (102mm) Tower Pointer, and 8″ (203mm) Tower Pointer.
Replacement Parts: #710106 4″ (102mm) Reverse Cone Pointer, #710107 8″ (203mm) Reverse Cone Pointer, #710109 4″ (102mm) Tower Pointer, #710108 8″ (203mm) Tower Pointer Made in the U.S.A.
-
$1,144.19
$1,716.07Mo-Clamp 7001 Universal Tram Gauge with Cardboard Box
MO-Clamp 7001 Universal Tram Gauge with Cardboard Box – Tram Instruments are a versatile and indispensable tool for determining collision damage to uni-body cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mechanical components. The Tram Instrument makes it easy to establish dimensions around components and to check contours by comparing measurements from one side of the vehicle to the other. Measures from 2-1/2″ (65mm) to 11′ (3.3m). Level bubble installed in sliding head for accuracy in measurement. Made in the U.S.A.
-
$1,160.83
$1,741.03Mo-Clamp 7000 Universal Tram Gauge with Storage Case
MO-Clamp 7000 Universal Tram Gauge with Storage Case – Tram Instruments are a versatile and indispensable tool for determining collision damage to uni-body cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mechanical components. The Tram Instrument makes it easy to establish dimensions around components and to check contours by comparing measurements from one side of the vehicle to the other. Measures from 2-1/2″ (65mm) to 11′ (3.3m). Level bubble installed in sliding head for accuracy in measurement. Includes hard plastic storage case. Made in the U.S.A.
-
$1,256.12
$1,883.95Mo-Clamp 5090 #9 Tool Board with Hooks
MO-Clamp 5090 #9 Tool Board – Keep your tools organized and in good condition with handy tool boards.
The package includes: #5091 Tool Board with Hooks #0045 Angle Bite Clamp #0054 Mini Spring Clamp #0205 Dyna-Mo C Clamp #0305 Dyna-Mo Jr Clamp #0405 Dyna-Mo W Clamp #2450 Boltless Strut Tower Puller #4058 MAC II Multi-Angle Clamp #5616 Door Post Puller/Twister #5091 Toolboard Dimensions: 2’x2′ Tools are Heat Treated Steel and Made in the U.S.A.
-
$1,351.92
$2,027.63Mo-Clamp 4018 Mercedes Anchoring Adapters
MO-Clamp 4018 Mercedes Anchoring Adapters – For holding vehicles with Mercedes-type jack tube holes. Jack pin adapters provided for early and late models (two different sizes).
Overall Length: 14″ (356 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #5249 Nut, Bolt & Washer, #401805 Small Pin, #401804 Large Pin Heat Treated Steel. Made in the U.S.A.
-
$1,418.79
$2,127.92Mo-Clamp 5010 #1 Tool Board
MO-Clamp 5010 #1 Tool Board with Tools Including:
- #0100 B Clamp
- #0200 C Clamp
- #0300 JR Clamp
- #0400 W Clamp
- 2- #1200 Twin Pull
- #1300 Sill Hook
- #1800 Track Hook
- #5011 Tool Board with Hooks
#5011 Toolboard Dimensions: 2’x2′ Tools are Heat Treated Steel and Made in the U.S.A
-
$1,515.76
$2,273.36Mo-Clamp 4028 BMW Hold Down
MO-Clamp 4028 BMW Hold Down – For holding BMW vehicles with oblong or round jack tube holes.
Overall Length: 14″ (356 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #5249 Nut, Bolt & Washer, #402801 Rocker Pin Heat Treated Steel. Made in the U.S.A.
-
$1,672.60
$2,508.58Mo-Clamp 4015 Frame Rack Jaws with Angle Bracket
MO-Clamp 4015 Frame Rack Jaws with Angle Bracket – Will hold down cars with horizontal pinch welds including Honda 1990 and up. Angles can be drilled to fit frame racks, benches, etc. Includes two #4044 1/2 ” Shackles.
Gripping Surface: 13″ wide (330mm) Overall Length: 6″ (406mm) Capacity: 6 tons (5,443kg) Replacement Parts: #5200 Nut, Bolt and washer, 840076 spring #4016 Frame rail angle bracket (1 only) Heat Treated Steel. Made in the U.S.A.
-
$1,955.52
$2,932.91Mo-Clamp 7200 Deluxe Centerline Gauge
MO-Clamp 7200 Deluxe Centerline Gauge (w/o Board)
- Measures automatic centerline for all vehicles
- For use with foreign and domestic
- Exceptional reliability and accuracy
- Recessed tapes for efficient reading and durability
- Made of rugged, light-weight cast aluminum
- Measures in metric units.
- Instruction manual included
- Compatible with all data books.
- Includes (4) #710161 8″ (203mm) Vertical Scales
- Includes (2) #710163 16″ (406mm) Vertical Scales
- Includes (2) #710164 24″ (610mm) Vertical Scale
Note: Some Vehicles may require optional Vertical Scales (That are not included with this kit)
- Optional #710162 12″ (305mm) Vertical Scale – Sold Separately
- Optional #710165 30″ (762mm) Vertical Scale- Sold Separately
Replacement Parts: #710161 8″ (203mm) Vertical Scale, #710163 16″ (406mm) Vertical Scale, #710164 24″ (610mm) Vertical Scale, #710129 Board Only, #710131 Hook Set Only Heat Treated Steel. Made in the U.S.A.
-
$3,995.00
$5,041.60CMO – Electro Power Auto Body Repair & Alignment System – Combo Kit
CMO Electro Power Combo Kit – Key Features
- Powerful 5-ton push & pull system for efficient collision repairs
- Portable, battery-operated unit – no hoses, pumps, or cables required
- Supports multiple functions: push, pull, squeeze, spread, and align metal
- 130 mm stroke piston for precise and controlled operation
- Works on aluminum, steel, and glue-based repairs
- Compatible with vacuum pull posts, weld tabs, wiggle wire, chains, and more
- Ideal for repairing doors, pillars, frames, floors, and body panels
- Comes in a durable blow-molded case with battery & charger
- Designed for faster, cleaner, and more efficient repairs
- Manufactured by CMO
Kit Includes
- Standard Electro Power Kit (GAT-EP-1000)
- Accessory Kit (GAT-EP-1001)
- Spread Attachment (GAT-EP-1002)
-
$4,181.03
$5,750.09Mo-Clamp 5078 #10 Tool Board
MO-Clamp 5078 #10 Tool Board with Tools Including:
#0200 C Clamp
#0205 Dyna-Mo C Clamp
#0300 JR Clamp
#0305 Dyna-Mo Jr Clamp
#0405 Dyna-Mo W Clamp
#0550 T.O. Clamp
#0660 Long Nose Clamp
#0670 Baby Box Clamp
#0680 Big Mouth Clamp
#1250 Panel Puller
#1300 Sill Hook
#1800 Track Hook (2 Each)
#2400 Adapter Plate
#3110 Small Flat Nose Sheet Metal Hook
#3130 Large Flat Nose Sheet Metal Hook
#4130 Hole Plug (2 Each)
#4145 Double Grab Hook (2 Each)
#5616 Door Post Puller/Twister
#5800 G Clamp
#6311 “T” Hook Tie-Downs (2 Each)
#6302 Slide-Through Sling
#6350 Cable Sling
#6400 Deep Hook Set
#5079 Tool Board with Hooks
105lbs
