-
$374.46
$561.62Mo-Clamp 0400 W Clamp
MO-Clamp 0400 W Clamp – Self-Tightening. The Super Clamp for the tough jobs. Ultra-wide gripping surface. Grabs 4-¼” of metal. Original wedge. Original straight cut tooth design.
-
$160.99
$235.88Mo-Clamp 0405 Dyna-Mo Clamp W Clamp
MO-Clamp 0405 Dyna-Mo Clamp W Clamp – New generation of Mo-Clamps. Self-Tightening. Wider tooth surface to grab more thin metal without tearing. Drop-forged round wedge to keep twist out of chain and aggressive cross-hatch tooth design.
-
$289.23
$433.79Mo-Clamp 0450 Flash Clamp 5ton
MO-Clamp 0450 Flash Clamp 5 Ton – New Mo-Grip™ surfaced jaws provide superior traction when coupled with pivoting head for uneven surfaces. Spring-loaded operation means no impacting to tighten. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws can be easily replaced.
Capacity: 5 tons (4,536 kg) Length: 8″ (203 mm) Width: 2″ (50.7 mm) Weight: 3 lbs (1.36 kg) Replacement Parts: #010453 Pivot Jaw, #010702 Small Round Wedge, #520039 Pivot Pins, #520033 Retaining Bolt, #840076 Spring Heat Treated Steel. Made in the U.S.A.
-
$245.32
$367.93Mo-Clamp 0451 Flash Clamp 3ton Capacity
MO-Clamp 0451 Flash Clamp 3 Ton Capacity. Spring-loaded operation makes each clamp easy to use. Mo-Grip surface and pivoting head allows for a secure grip on almost any surface. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws can be easily replaced.
Capacity: 3 tons (2,722 kg) Length: 8″ (203 mm) Width: 1½” (38 mm) Replacement Parts: #045103 Pivot Jaw, #010704 Wedge, #520038 Pivot Pins, #520031 Retaining Bolt, #840076 Spring Heat Treated Steel. Made in the U.S.A.
-
$335.80
$503.64Mo-Clamp 0452 Flash Clamp 7ton
MO-Clamp 0452 Flash Clamp 7 Ton – Spring-loaded operation makes each clamp easy to use. Mo-Grip surface and pivoting head allows for a secure grip on most surfaces. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws can be easily replaced.
Capacity: 7 tons (6,350 kg) Length: 8″ (203 mm) Width: 3½” (89 mm) Replacement Parts: #045203 Pivot Jaw, #010706 Wedge, #520029 Pivot Pins, #520033 Retaining Bolt, #840076 Spring Heat Treated Steel. Made in the U.S.A.
-
$204.43
$299.53Mo-Clamp 0550 Tight Opening Clamp
MO-Clamp 0550 Tight Opening Clamp – Mo-Clamp’s new design Tight Opening Clamp has all the same gripping dimension requirements as the old design. Redesigned and strengthened with our totally new screw drive mechanism. Still a full 3 ton capacity. Still able to reach core support and upper sheet metal areas where no other can. Perfect for small pick-up frame rails.
Gripping Surface: 1½” wide (38 mm), ½” deep (13 mm) Overall Length: 6½” (165 mm) Capacity: 3 tons (2,722 kg) Heat Treated Steel. Made in the U.S.A.
-
$292.50
$438.70Mo-Clamp 0551 Original Tight Opening Clamp
MO-Clamp 0551 Original Tight Opening Clamp – Mo-Clamp’s re-introduced the Tight Opening Clamp due to popular demands for the old design. Still a full 3 ton capacity. Still able to reach core support and upper sheet metal areas where no other can. Perfect for small pick-up frame rails.
Gripping Surface: 1½” wide (38 mm), ½” deep (13 mm) Overall Length: 6½” (165 mm) Capacity: 3 tons (2,722 kg) Heat Treated Steel. Made in the U.S.A.
-
$193.96
$284.19Mo-Clamp 0650 Box Clamp
MO-Clamp 0650 Box Clamp – A must for pulling on box rails with welded-on bumper flanges. Reaches around protruding metal to get a grip on hard-to-reach surfaces. Its heat-treated jaws grip a substantial area for pulls from several directions and angles. Gator tooth design.
Gripping Surface: 2″ wide (50 mm), 2″ deep (50 mm) Overall Length: 10″ (254 mm) Capacity: 4 tons (3,629 kg) Replacement Parts: #5330 Nut, Bolt & Washer Heat Treated Steel. Made in the U.S.A.
-
$146.09
$214.05Mo-Clamp 0655 Dyna-Mo Box Clamp
MO-Clamp 0655 Dyna-Mo Box Clamp – These heat-treated jaws reach around flanges and other obstructions to get a grip on hard-to-reach surfaces. Severe duty tooth design for aggressive pulling power.
Gripping Surface: 1¼” wide (32 mm), ½” deep (10 mm) Overall Length: 8″ (201 mm) Capacity: 3 tons (2,722 kg) Replacement Parts: #9702 Wedge, #5254 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
-
$182.57
$267.50Mo-Clamp 0660 Long Nose Clamp
MO-Clamp 0660 Long Nose Clamp – Similar to the popular #0300 Jr® Clamp, the Long Nose is self-tightening and includes the original wedge. Cross-hatch tooth design, spring loaded for easy opening, deeper reach for hard-to- get-to areas.
Gripping Surface: 1¾” wide (45 mm), 1″ deep (25 mm) Overall Length: 9½” (241 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #9701 Wedge, #5251 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
-
$222.73
$326.35Mo-Clamp 0670 Baby Box Clamp
MO-Clamp 0670 Baby Box Clamp – Self-tightening. Great for single-lip flanges and inside frame horns. Original wedge; cross- hatch tooth design; spring-loaded for easy opening. Throat clearance of 1½” high (38 mm), 1¼” deep (32 mm).
Gripping Surface: 1¾” wide (45 mm), 1″ deep (25 mm) Overall Length: 9½” (241 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #9701 Wedge, #5252 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
-
$255.60
$374.50Mo-Clamp 0680 Big Mouth Clamp
MO-Clamp 0680 Big Mouth Clamp – Self-tightening. A perfect solution for hard-to-get-to areas. Great where large opening is needed. Original wedge; cross-hatch tooth design; spring-loaded for easy opening. Throat clearance of 2¼” high (57 mm), 1¼” deep (32 mm).
Gripping Surface: 1¾” wide (45 mm), 1″ deep (25 mm) Overall Length: 9½” (241 mm) Capacity: 5 tons (4,536 kg) Replacement Parts: #9701 Wedge, #5253 Nut, Bolt, Spring & Washer Heat Treated Steel. Made in the U.S.A.
