-
$64,863.98
$67,346.5422′ with 4 Towers 9014234
-
$62,674.96
$65,158.3422′ with 5 Tower 9012812- 3 Main and 2 Roller
-
$5,138.49
$5,438.49Dent Fix DF-900B Aluspot Aluminum Dent Repair Station – Mini
Dent Fix DF-900B Aluspot Aluminum Dent Repair Station – Mini
The DF-900B is designed to operate as a main or satellite unit and utilizes some of the same Dent Fix innovations and premier equipment as the larger Aluspot systems but at a fraction of the price.
Invest in the future and start repairing minor to moderately damaged aluminum panels!
This kit includes:
An aluminum specific stud welder with the ground integrated on the gun
Spitznagel self-locking stud pull fingers
Two kinds of alu-studs
Leverage puller
T-puller
Metal bar for crease pulling
2 kinds of brushes with metal bristles
Stud cut pliers
A mobile storage cart with electrical power strip
Consumable storage case
Twist-on eyelets
Safety glasses
Dust cover
Although the kit includes all the basics a shop will need to start repairing aluminum, shops can purchase additional pieces separately to expand their aluminum repair capabilities. -
$45,000.00
$65,000.00EURO-LINER FRAME MACHINE-INDUSTRY LEADING 10,000 LB LIFTING CAPACITY
Specifications:
• Minimum Height: 15 inches
• Maximum Height: 48 inches
• Overall maximum height with towers attached: 108 inches (9 ft.)
• Tower Height: 60 inches plus (height extensions included)
• Tower Length: 52 inches (4.3 ft.)
• Tower Height with Extension: 90 inches
• Rack Length: (w/o tower & ramps): 18 ft.
• Rack Length (w/tower & ramps): 24.4 ft.
• Rack Width (w/o ramps): 46 inches
• Rack Width (w/ramps): 82 inches
• Ramp Width: 17.75 inches
• Weight of Rack: 3000lbs.
• Maximum Lift Capacity: 10,500 lbs.
• Power required: 110v single phase 25-30 amp dedicated service
• Minimum Compressed Air: 110 psi
• Maximum Compressed Air: 145 psi
• Hydraulics for Lift: TITANIUM Electric Hydraulic System
• Hydraulics for Towers: SPX Power Team 10 ton foot pump
• Hydraulics for Towers: TITANIUM 10 ton 10 inch stroke ram
• Tower Pulling Force: 10 Ton
• 360 Degree Pulling Capacity: Yes
• Above Ground or In Ground Installation: Yes
• Designed for In Ground Pit InstallationPackage includes:
• TITANIUM Euro-Liner 18 ft. Bench Rack
• TITANIUM electric hydraulic system, control cabinet including hand pendant (for raise & lower)
• (2) SPX Power Team 10 Ton foot pumps (for towers)
• (2) Ten ton towers loaded with TITANIUM 10 ton 10 inch rams
• (2) Grade 100 high alloy pull chains w/forged slip hooks
• (10) Floor anchor bolts
• (5) Down pull assemblies
• (2) Removable zinc coated drive on ramps
• (4) Heavy duty forged pinch weld clamp assemblies
• (4) Truck anchor clamps
• (2) Pillar jacks w/mounting adapters -
$16,047.00FR-55 Scissor Lift and Frame Rack
When it comes to collision repair and frame straightening, having the right equipment is essential. The FR-55 Scissor Lift and Frame Rack is designed to provide mechanics, body shops, and auto repair professionals with an efficient and reliable solution for handling vehicle repairs. With its powerful lifting capability and rugged frame straightening features, this tool is a must-have for any professional workshop.
-
$4,000.00Lift King bed lift – Main Component Only Lift King
Product Description
Lift King Light Duty Plus Bed Lifting and bed dolly system
The Lift King Light Duty bed lift and storage MAIN UNIT ONLY, bed removal system comes with everything needed for one technician of any size to remove or install OEM pickup boxes of all sizes, including up to 8’ dually boxes. Lift King Main Component quickly converts from the stored position to the working position without needing any tools. Bed box can be removed in as little as five minutes including the original set up time. After removal, the box can easily be moved around the shop and stored as needed. This will also remove beds w/o removing rear bumper. Safely store this in a 3′ X 3′ area
- Main Unit only (This is for shop who already has a complete system)
- 1 Technician required to remove bed
- Improves productivity (multiple technicans not required)
- Works with little or limited cab to bed clearance
- Lift bed to desired height when repairs are required
- Increases productivity when performing fuel pump replacements
- Mitigates and limits risk of damages
- Lowers risk of employee fatigue, strain and injury
- safest and most efficient way to remove or install a pickup box
- Compact design allows storage in a 3′ X 3′ area
- Ships LTL (large truck)
-
$4,400.00Lift King Light Duty Package Bed Lift
Product Description
The Lift King Light Duty bed removal package comes with everything needed for one technician of any size to remove or install OEM pickup boxes of all sizes, including up to 8’ dually boxes. the Lift King Main Component quickly converts from the stored position to the working position without needing any tools. Bed box can be removed in as little as five minutes including the original set up time. After removal, the box can easily be moved around the shop and stored as needed. This will also remove beds w/o removing rear bumper. Safely store this in a 3′ X 3′ area
-
$4,900.00Mid Rise Scissor Lift 8000lbs Electric Release Auto Lift 110V/1PH
When it comes to efficiency and safety in your auto repair shop or home garage, having the right lifting equipment is crucial. The Mid Rise Scissor Lift 8000lbs Electric Release Auto Lift 110V/1PH is a versatile and powerful tool designed to make vehicle maintenance easier, safer, and more convenient.
-
$1,975.00Portable Pull Tower by Dent Fix
Game-changing pulling angles in a lightweight and highly mobile.
ApplicationUtilized for the straightening of automotive body panels. Self-stabilizing via an air-vacuum anchoring system, allows user to work at a more comfortable height without strain on the body.
Not suitable for straightening or repairing of structural vehicle parts.
IncludesSolid Suction Base
Seal Gasket and Four Pads
Tower with Multiple Height Settings
Winch
Winch Support line
6-Finger Bear Claw
Two Wheels
High Performance Noise Silencer
SpecificationsPulling Force: 770 lbs. (Top & Bottom)
Max Pull Height: 52”
Line Capacity: 2,200 lbs
Line Length: 78”
Unit Weight: 68 lbs
Max PSI: 72 > 116 PSI
Air Inlet: 1/4
Base Dimensions: 14.5” x 24”
Base Feature: 4 Anti-Slip Pads
Seal for Plate: 68”
Weight: 67 lbs.
Shipping Dimensions: 46.5″ L x 15.7″ W x 3.5″ H -
$95.00
$128.25Replacement Chain Roller Wheel – For Chief S21 Frame Machine
Replacement Chain Roller Wheel – For Chief S21 Frame Machine, Wheel is 5″ and accommodates the heavy duty 1/2″ Chain. This wheel will work with chief S21, S21m, Signature frame machines, and you can compare this to chief part # 601201.
Roller is for chief Tower Collars and fits and works with the following frame machines
- Chief S21 & S21M, Goliath,
- Signature & Signature Hybrid Frame Machine
- Compares to and replaces chief Part# 601201
- Wheel is 5″ and Grooved for a 1/2″ Tower chain
- Center hole is 1-1/4″
- ( pin Sold separately)
- ( Retaining Clip Sold separately)
This is a Non OEM part that replaces the original
