-
$1,568.29Dentfix DF-3DX Digi-Tram Digital
- SKU:
- DF-3DX
- UPC:
- 811662031062
- Availability:
- Usually Ships in 3 to 5 Business Days
-
$1,871.44
$2,126.63Dentfix DF-505/220 Maxi Dent Removal System 220v
DentFix DF-505 Maxi Dent Removal System 220 Volt
MAXI DF-505/220V is a 220 volt single phase
WELD – PULL – TWIST
Provides power needed to shrink, pull rocker panels, hail damage, creases, dents
Increases workers productivity while producing a cleaner, better repair.
Versatile tool will Weld Pins
Weld a slide hammer directly to the panel
Weld a light pulling rod
Weld wiggle wire for even crease pulling
Weld a rod for leverage pulling
Shrink metal
5 Year Warranty
Made in USA
Complete kit includes220 volt unit
two light pulling rods
two slide hammer rods with strike weight
stud pin electrode, shrinking electrode, wiggle wire weld tip
nine and four finger Bear Claw
optional DF-509 rolling cart is available separately. -
$1,891.39
$2,149.31Dentfix DF-SPR/BRAD Blind Rivet Adapter
Dent Fix Equipments SPR Riveters can install blind rivets with the addition of the Blind Rivet Adapter (DF-SPR/BRAD).
The Blind Rivet Adapter is compatible with the SPR Riveter (DF-SPR67) and Push Pull Riveter (DF-SPR69).
A flexible neck allows for the tool to be positioned into hard to reach areas.
The adapter allows the setting of blind rivets with diameters from 4.0 to 7.8 mm for aluminum and 4.0 to 6.4 mm for steel. It has a tensile force is 20 kN.
Both Riveters Sold Separately
-
$1,971.25
$2,240.05DentFix 505/110 Maxi Dent Removal System, 110 Volt
DentFix DF-505 Maxi Dent Removal System 110 Volt
MAXI DF-505/110V
WELD – PULL – TWIST
Provides power needed to shrink, pull rocker panels, hail damage, creases, dents
Increases workers productivity while producing a cleaner, better repair.
Versatile tool will Weld Pins
Weld a slide hammer directly to the panel
Weld a light pulling rod
Weld wiggle wire for even crease pulling
Weld a rod for leverage pulling
Shrink metal
5 Year Warranty
Made in USA
Complete kit includes110 volt unit
two light pulling rods
two slide hammer rods with strike weight
stud pin electrode, shrinking electrode, wiggle wire weld tip
nine and four finger Bear Claw
optional DF-509 rolling cart is available separately.
Complete kit includes: The Maxi 110 volt unit, two light pulling rods, two slide hammer rods with strike weight, stud pin electrode, shrinking electrode, wiggle wire weld tip, a nine and four finger Bear Claw, 500 stud weld pins, 1 pound of wiggle wire, 21 feet of power cable, and nine feet of welding cable.Taking the idea of a stud welder one step further, this versatile tool will: 1. Weld pins 2. Weld a slide hammer directly to the panel 3. Weld a light pulling rod 4. Weld wiggle wire for even crease pulling 5. Weld a rod for leverage pulling 6. Shrink metal
-
$1,975.00Portable Pull Tower by Dent Fix
Game-changing pulling angles in a lightweight and highly mobile.
ApplicationUtilized for the straightening of automotive body panels. Self-stabilizing via an air-vacuum anchoring system, allows user to work at a more comfortable height without strain on the body.
Not suitable for straightening or repairing of structural vehicle parts.
IncludesSolid Suction Base
Seal Gasket and Four Pads
Tower with Multiple Height Settings
Winch
Winch Support line
6-Finger Bear Claw
Two Wheels
High Performance Noise Silencer
SpecificationsPulling Force: 770 lbs. (Top & Bottom)
Max Pull Height: 52”
Line Capacity: 2,200 lbs
Line Length: 78”
Unit Weight: 68 lbs
Max PSI: 72 > 116 PSI
Air Inlet: 1/4
Base Dimensions: 14.5” x 24”
Base Feature: 4 Anti-Slip Pads
Seal for Plate: 68”
Weight: 67 lbs.
Shipping Dimensions: 46.5″ L x 15.7″ W x 3.5″ H -
$2,180.36
$2,295.00The MAXI EX – 220V
Product Details
MAXI-MIZE your steel panel repairs with the special MAXI EX configuration!APPLICATION:
Efficiently repairs light to moderate collision damage on automotive steel panels for a cleaner, better repair.FEATURE & BENEFITS:
LEGENDARY – #1 Steel Dent Repair Station preferred by technicians around the world.
EXTENDED HANDLE – Organizes the cables out of the way for safe, nimble movement of the unit.
PADDED SEAT – Extra storage and brings the technician to eye level with the repair area.
ACCESSORY TRAYS – Holds the consumables and tools poised & ready for rapid deployment.
DESCRIPTION:
One of the Most Common Steel Panel Repair Areas is the Dog-Leg or Door Repair. The MAXI EX configuration brings the technician eye level with the damage. The ergonomic position saves the tech from bending over or kneeling and prevents unnecessary daily stress on their body.Just WELD • PULL • TWIST! The Dent Fix Equipment MAXI DF-505EX220 is a 220 volt single phase steel dent pulling station that provides the technician with the power they need to shrink, pull rocker panels, hail damage, creases, dents in hard to access areas and all types of metal damage.
The efficiency of this tool increases the workers productivity while producing a cleaner, better repair. Taking the idea of a stud welder one step further, this versatile tool will:
1. Weld pins & keys
2. Weld a slide hammer directly to the panel
3. Weld a light pulling rod
4. Weld wiggle wire for even crease pulling
5. Weld a rod for leverage pulling
6. Shrink metalINCLUDES: EX Edition includes the MAXI 220V (DF-505/220V: Leverage Puller, Rods, Claws, Electrodes, and Consumables), 2 Accessories Shelves (DF-505AT), Padded Seat (DF-505MS), and an Extended Handle (DF-505PHXT, replaces standard handle that comes with the unit)!
The Dent Fix website and databases are all intended to be used as a GUIDE ONLY – it is important to remember that the auto body professional performing the repair is in a position to thoroughly inspect, diagnose and identify the methodology and their unique cost of the vehicle damage repair.
-
$2,206.23
$2,395.00The MAXI EX – 110V
Product Description
MAXI-MIZE your steel panel repairs with the special MAXI EX configuration!APPLICATION:
Efficiently repairs light to moderate collision damage on automotive steel panels for a cleaner, better repair.FEATURE & BENEFITS:
LEGENDARY – #1 Steel Dent Repair Station preferred by technicians around the world.
EXTENDED HANDLE – Organizes the cables out of the way for safe, nimble movement of the unit.
PADDED SEAT – Extra storage and brings the technician to eye level with the repair area.
ACCESSORY TRAYS – Holds the consumables and tools poised & ready for rapid deployment.
DESCRIPTION:
One of the Most Common Steel Panel Repair Areas is the Dog-Leg or Door Repair. The MAXI EX configuration brings the technician eye level with the damage. The ergonomic position saves the tech from bending over or kneeling and prevents unnecessary daily stress on their body.Just WELD • PULL • TWIST! The Dent Fix Equipment MAXI DF-505EX110 is a 110 volt single phase steel dent pulling station that provides the technician with the power they need to shrink, pull rocker panels, hail damage, creases, dents in hard to access areas and all types of metal damage.
The efficiency of this tool increases the workers productivity while producing a cleaner, better repair. Taking the idea of a stud welder one step further, this versatile tool will:
1. Weld pins & keys
2. Weld a slide hammer directly to the panel
3. Weld a light pulling rod
4. Weld wiggle wire for even crease pulling
5. Weld a rod for leverage pulling
6. Shrink metalINCLUDES: EX Edition includes the MAXI 110V (DF-505/110V: Leverage Puller, Rods, Claws, Electrodes, and Consumables), 2 Accessories Shelves (DF-505AT), Padded Seat (DF-505MS), and an Extended Handle (DF-505PHXT, replaces standard handle that comes with the unit)!
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
The Dent Fix website and databases are all intended to be used as a GUIDE ONLY – it is important to remember that the auto body professional performing the repair is in a position to thoroughly inspect, diagnose and identify the methodology and their unique cost of the vehicle damage repair.
-
$2,979.32
$3,385.59DentFix DF-EZN1 EZ Nitrogen Plastic Welder – Bottle
DentFix DF-EZN1 EZ Nitrogen Plastic Welder – The DF-EZN1 EZ NITRO PLASTIC WELDER is unique in its use of proprietary Flow Adjust Switch Technology (FAST). The FAST system makes the DF-EZN1 the easiest nitrogen welder to learn and use. It simplifies nitrogen welding and eliminates flow adjustments by the user. This significantly reduces the time to set up the welder and gets the work done FAST.
Equipped with two welders, the DF-EZN1 EZ NITRO incorporates both a nitrogen welding torch and an airless welding torch. The nitrogen torch is air cooled. It is essential to establish and maintain air flow before turning the welder on, and air flow must be maintained until the nitrogen torch cools down. (Usually 10 minutes to cool down after powering down)
The unit comes with plastic rod in various types and sizes to enable the user to weld different types of plastic and different types of damages. Also included is a roll of aluminum tape to hold parts together when welding. The hand seaming tool help shapes, flatten, and insure that repaired flanges and tabs are the correct thickness.
The cart is equipped with a tank regulator, tank brackets, tank chain, a heat gun holster, and a power strip for powering other tools.
-
$3,750.00
$3,800.00HeatMAX Deluxe Induction System by Dentfix
The DF-HM90DX HeatMAX Induction System has five interchangeable inductors to transform how body shops approach Paintless Dent, Repair, Glass /Panel Removal, and Disassembly.
Paintless Dent Repair – Hail damage repair work can be slow, tedious, and often come in huge waves that will overrun a shop, if they are not prepared. Induction is the quickest way to save the factory paint (and your precious time) when performing minor PDR repairs, in multiple areas, on a damaged vehicle.
Glass & Bed Liner – Gently removes bonded glass, windshields, panoramic roof, and rear quarter light without damaging the trim. In addition to glass, the glass inductor can remove Spray-On Bedliner, Metal Bond Adhesives, and Sheet Molding Compound
(SMC) panels.
Dissasembly – Gently Warm it Up or get the metal part Red Hot, Quickly!
Pad : Vinyl Graphics, Sound Pads,Vapor Barriers, Moldings, Emblems, & Decals.
Bolt : Nuts/Bolts, Body Caulking, & Seam Sealers.
Spiral : Bearings, Gears, Pulleys,Oxygen Sensors, & Nuts/Bolts.
Tough jobs get done with induction heating. Make your life easier with the HeatMAX Induction System!Application
A powerful, instantaneous induction heating system ideal for bodywork, mechanics and maintenance.
Feature & BenefitsAuto or Manuel Mode – No need to memorize different settings. Just turn it on and go.
No Flame Max Heat – Safely isolate the heat to accurately target the desired part.
Glue Destroyer – Easily eliminate adhesion without damage to surrounding parts.
IncludesHeatMAX Induction Unit
PDR Inductor
Glass Inductor
Pad Inductor
Bolt Inductor
5 Piece Spiral Inductor with Case
Foot Activated Pedal Trigger
3 Piece Trim Wedge Set
Mobility Cart
StorageIncludes Mobility Cart and a Rugged storage case for the Spiral Inductor Set.
-
$4,386.64
$4,984.81DentFix DF-EZN1G EZ Nitrogen Plastic Welder – Generator
The DF-EZN1G EZ Nitro Plastic Welder Generator eliminates the need for refilling nitrogen tanks and has a smaller footprint taking up less space in the shop thanks to its onboard nitrogen generator. The proprietary Flow Adjust Switch Technology (FAST) system makes the DF-EZN1G the easiest nitrogen welder to learn and use. It simplifies nitrogen welding and eliminates flow adjustments by the user. This significantly reduces the time to set up the welder and gets the work done FAST.
Equipped with two welders, the DF-EZN1G EZ Nitro Generator incorporates both a nitrogen welding torch and an airless welding torch. The nitrogen torch is air cooled. It is essential to establish and maintain air flow before turning the welder on, and air flow must be maintained until the nitrogen torch cools down. (Usually 10 minutes to cool down after powering down)
The unit comes with plastic rod in various types and sizes to enable the user to weld different types of plastic and different types of damages. Also included is a roll of aluminum tape to hold parts together when welding. The hand seaming tool help shapes, flatten, and insure that repaired flanges and tabs are the correct thickness.
The cart is equipped with a heat gun holster, and a power strip for powering other tools.
The welder uses 110volts and a maximum of 10amps, total consumption is a maximum of 600watts. -
$4,395.60
$4,995.00Dentfix DF-GM/DXE GLUEMAX Glue Repair Station
Elevate your Glue Panel Repairs to the MAXIMUM !
The GLUEMAX Glue Repair Station DF-GM/DXE is the ultimate pulling station equipped with both cold and hot glue pulling options. From heavy duty glue GPR pulls to cosmetic PDR corrections this kit has your shop’s needs covered.
APPLICATION
Multiple cold and hot glue pulling options to repair damage in automotive steel and aluminum panels while preserving OEM coatings and interior integrity.FEATURE & BENEFITS
HOT & COLD GLUE – Repair panel damage utilizing the advantages of both methods.
HEAVY DUTY PULLS – Our Xtreme Glue Pulling system allows for powered assisted pulls.
SMALL & DETAIL CORRECTIONS – Ultra Ding Massager Kit for controlled pulls for small areas.
STORAGE & PROTECTION – Enclosed and lock-able cart protects the tools from the shop environment.
INCLUDED IN THE KIT
DF-CGS71 Cold Adhesive Glue Slide Hammer Kit
DF-CGS72 Cold Adhesive Glue Pads Kit w/Cold Glue “Mammoth Tar”
DF-CGLB Arctic Ice Light Blue Cold Glue
DF-GPX Xteame Glue Puller
DF-DM555UDX Ding Massager Deluxe
DF-DM55DE Ding Enhancer Shield
DF-DM510DBY Yellow Ding Board
DF-505BP Bridge Puller
DF-509 9-Finger Bear Claw
DF-504 4-Finger Bear Claw
DF-900TP T-Puller
DF-900LP Leverage Puller
DF-DB79TK Knockdown Tool
DF-935LED LED Ligh -
$5,887.81
$6,690.65Dentfix DF-505/DXE The MAXI Extended Dent Removal Repair Station 220v
Dentfix DF-505/DXE The MAXI Extended Dent Removal Repair Station 220v
The DF-505/DXE Maxi Extended is the ultimate steel repair station! Every tool you need all in one station that can be rolled to different bays in the shop. A lockable cabinet with foam fitted inserts to keep the tools organized and accounted for.
Complete kit includes
220V The Maxi Single Phase Unit Welder
Lockable 5-Drawer Cart
5-Piece Hammer Set
6-Piece Dolly Set
Body File & Blade
Bridge Puller (DF-505BP)
Maxi Massager (DF-505DM)
9-Finger Bear Claw (DF-506)
4-Finger Bear Claw (DF-504)
Leverage Puller (DF-503L)
Magnetic Key Electrode (DF-503KEM)
Wiggle Wire Sample
Stud Pin Samples
Weld Key Samples
Right Angle Undercoat Remover (DF-701) with brush and eraser wheels
Flexible Fender Puller (DF-HD0140)
Finger Belt Sander (DF-FBS16)
Door Prop Stick (DF-DSP1)
Suction Gun (DF-SG70)
Ring Hammer (DF-903)
Plastic Scrapper (DF-WK20)
Wedge Scrapper Set (DF-609)
Multi-Clip Pliers (DF-625)
Bodyline Marker Tool (DF-BL10A)
Surge Protector (DF-601A)
Safety Glasses (DF-901SG)
Dust Cover (DF-505DXEDC)
