-
$17.53
$22.19Dentfix DF-CT887RS 5.0mm 7/32″ Plastic Pop Rivet 50 Pcs.
DentFix DF-CT887RS 5.0mm 7/32″ Plastic Pop Rivet 50 Pieces
-
$101.23
$134.97Dentfix DF-CT888 Swivel Slim-Line Plastic Riveter Kit
Dentfix DF-CT888 Swivel Slim-Line Plastic Riveter – compact plastic rivet pliers is perfect for tight and hard to reach places. Use on vehicles where plastic rivet clearance is minimal or obstructed.
Plier requires about 2 inches of clearance to fully pull rivets.
No pumping needed. Saves time and dis-assembly effort!
Specifically designed for plastic rivets.
Kit includes riveter, 10 short plastic rivets, 10 long plastic rivets, and blow molded case.
Plastic rivets are also available separately.
Prop 65Dimensions 2 x 11.5 x 7.75 in
-
$19.67
$24.90Dentfix DF-DB69 Dead Blow Hammer
DentFix DB69 – A unique Dead Blow Hammer that is three paint less dent repair (PDR) tools in one.
The dual head gives the user two striking ends to knock down high spot on dent repairs. Depending on the situation the metal end can be used for bare steel panels. Use the rubber end for a softer touch when performing paintless dent repair on painted surfaces or aluminum panels.Blow back is eliminated thanks to the dual flex neck that cushions each strike.
Flip the tool over and the chiseled end is perfectly suited for prying off door panels or removing glue residue and glue attached PDR pulling tabs.
Overall length: 7″
-
$43.07
$55.58Dentfix DF-DB79K Dead Blow Hammer Kit with 6 Tips
Dentfix DF-DB79K Dead Blow Hammer Kit with 6 Tips – a unique Dead Blow Hammer that can adapts to the technicians paint less dent repair (PDR) tool needs with interchangeable tips. The dual head gives the user two striking ends to knock down high spots on dent repairs. Depending on the situation the steel metal tip can be used for bare steel panels.
Kit includes 6 different interchangeable screw on tips:
Aluminum Round
Steel Round
Rubber Round
Plastic Flat
Brass Round
Brass FlatWhen working with aluminum panels use the aluminum tip to prevent contamination. The rubber or plastic tips can be used for a softer touch when performing paint less dent repair on painted aluminum or steel panels (do not cross contaminate). Both brass tips are non-sparking. Also includes blow-molded storage case.
Blowback is eliminated thanks to the dual flex neck that cushions each strike. Flip the tool over and the chiseled end is perfectly suited for prying off door trim panels or removing glue residue and glue attached PDR pulling tabs. The tool is seven inches in overall length.
-
$107.59
$136.19Dentfix DF-DM530SH Glue Puller T-Bar Slide Hammer
DentFix DF-DM530SH Slide Hammer for the Ding Massager
-
$373.43
$497.91Dentfix DF-DM555UDX Ultra Ding Massager
Dentfix DF-DM555UDX Ultra Ding Massager – Glue pullers are an excellent method for removing dings and small dents from OEM paint. When access to the back panel is not possible, a glue puller is the only means of PDR repair.
The Ultra Ding Massager DF-DM555UDX kit includes:
Squeeze Puller – allows for a massaging action that helps release the tension in the metal, allowing for a quicker more successful pull. The squeezed position holding capabilities allow for a constant pull.
T-Puller
Knock down tool with 2 heads (pointed and rounded)
Slide Hammer – for a more powerful pull on thicker metals, including steel and aluminum.
120V Glue Gun
Plastic Scraper Stick
12 Glue Sticks – specially formulated hot glue provides for strong adhesion yet easy removal using the release agent
24 Different Pulling Nibs – The new and redesigned pulling tabs provide the technician with more choices and nib surfaces for better fitment which improves grip when repairing the many varieties of dings and minor dents from small to large.
Blow Molded Case -
$30.46
$38.56Dentfix DF-DPS1 Door Prop Stick
DentFix DF-DPS1 Door Prop stick – Keeps door open when working on the door’s edge for paintless dent repair rods, when you need more room replacing locks, proper sanding and finishing of panels to not run over into the adjacent panel, and reaching spot welds. Can be used on either side of the car by twisting and locking in place. Length adjustable from 11 to 15 inches.
-
$24.15
$30.57Dentfix DF-DSP310 Door Skin Pliers
Dentfix DF-DSP310 Door Skin Pliers – Single
LARGE RUBBER PAD – Prevents the risk of damaging the front door skin.
T-BAR – Spreads the clamping force and the cushioned outer pad prevents paint marring.
ADJUSTABLE & LOCKABLE – Customize the clamp to perfectly to the required opening and position needed.
CONSTRUCTION: SteelThe Door Skin Pliers are a high quality, adjustable locking clamp specifically designed to hold a door skin in place while allowing full access to the rear door frame flange. Equipped with a large rubber pad on the front to prevent the risk of damaging the front of the door skin. The T bar on the rear side of the clamp allows the user to clamp down the door skin and hold it while bending the skin flange around the door frame.
**It is recommended to use in pairs. -
$160.77
$214.36Dentfix DF-EZ10 Parking Sensor and Lens Hole Maker
The Parking Sensor and Lens Hole Maker (Part No. DF-EZ10) from Dent Fix Equipment is the precise and clean way to create holes in order to install driver assist sensors on replacement bumpers.
Easy to use with a wide variety of sizes make this tool a must have for any shop.
-
$2,979.32
$3,385.59DentFix DF-EZN1 EZ Nitrogen Plastic Welder – Bottle
DentFix DF-EZN1 EZ Nitrogen Plastic Welder – The DF-EZN1 EZ NITRO PLASTIC WELDER is unique in its use of proprietary Flow Adjust Switch Technology (FAST). The FAST system makes the DF-EZN1 the easiest nitrogen welder to learn and use. It simplifies nitrogen welding and eliminates flow adjustments by the user. This significantly reduces the time to set up the welder and gets the work done FAST.
Equipped with two welders, the DF-EZN1 EZ NITRO incorporates both a nitrogen welding torch and an airless welding torch. The nitrogen torch is air cooled. It is essential to establish and maintain air flow before turning the welder on, and air flow must be maintained until the nitrogen torch cools down. (Usually 10 minutes to cool down after powering down)
The unit comes with plastic rod in various types and sizes to enable the user to weld different types of plastic and different types of damages. Also included is a roll of aluminum tape to hold parts together when welding. The hand seaming tool help shapes, flatten, and insure that repaired flanges and tabs are the correct thickness.
The cart is equipped with a tank regulator, tank brackets, tank chain, a heat gun holster, and a power strip for powering other tools.
-
$4,386.64
$4,984.81DentFix DF-EZN1G EZ Nitrogen Plastic Welder – Generator
The DF-EZN1G EZ Nitro Plastic Welder Generator eliminates the need for refilling nitrogen tanks and has a smaller footprint taking up less space in the shop thanks to its onboard nitrogen generator. The proprietary Flow Adjust Switch Technology (FAST) system makes the DF-EZN1G the easiest nitrogen welder to learn and use. It simplifies nitrogen welding and eliminates flow adjustments by the user. This significantly reduces the time to set up the welder and gets the work done FAST.
Equipped with two welders, the DF-EZN1G EZ Nitro Generator incorporates both a nitrogen welding torch and an airless welding torch. The nitrogen torch is air cooled. It is essential to establish and maintain air flow before turning the welder on, and air flow must be maintained until the nitrogen torch cools down. (Usually 10 minutes to cool down after powering down)
The unit comes with plastic rod in various types and sizes to enable the user to weld different types of plastic and different types of damages. Also included is a roll of aluminum tape to hold parts together when welding. The hand seaming tool help shapes, flatten, and insure that repaired flanges and tabs are the correct thickness.
The cart is equipped with a heat gun holster, and a power strip for powering other tools.
The welder uses 110volts and a maximum of 10amps, total consumption is a maximum of 600watts. -
$6,482.64
$7,366.63DentFix DF-EZN1G/DXE EZ Nitro Plastic Repair Station – Extended
The EZ Nitro Plastic Repair Station – Extended: Engineered to meet the needs of Premier Auto Body Shops everywhere. Utilizing an Award Winning Nitrogen Plastic Welder with a Dual Chamber Nitrogen Generator, the DF-EZN1G/DXE converts shop air into nitrogen and there is no need to refill nitrogen bottles! The easiest to use and most capable plastic welder station EVER, by Dent Fix!
The proprietary Flow Adjust Switch Technology (FAST) system makes the DF-EZN1G/DXE the easiest nitrogen welder to learn and use. It simplifies nitrogen welding and eliminates flow adjustments by the user. This significantly reduces the time to set up the welder and gets the work done FAST.
In addition to a nitrogen welder the kit also includes a thermoplastic hot stapler kit, complete with 7 variety of staples, three mini die grinders with 3 different bits, hand seamer, heat gun, ring hammer, multi-clip pliers, shaping tools, trim removal tools, and a variety of plastic welding rods (ABS, Polypropylene, Polycarbonate, Polyethylene, and Polyurethane).
As added bonus, a high pressure N2 Outlet gives you the ability to attach air-powered tools to the side of the unit and run on nitrogen! Nitrogen is beneficial because it has a lower moisture content, compared to shop air, which helps safeguard the internals from corrosion.
The DF-EZN1G/DXE EZ Nitro Plastic Repair Station by Dent Fix Equipment is everything you need your plastic repair station to be and more.
Kit Includes:EZ Nitro Plastic Welder with Nitrogen and Airless Plastic Welding capabilities
On-board Nitrogen Generator – Creates nitrogen from the atmosphere eliminating the need to refill bottles!
Hot Stapler – Deluxe Kit with 7 varieties of StapleClips (DF-800BR)
Assortment of Plastic Welding Rods (ABS, Polypropylene, Polycarbonate, Polyethylene, and Polyurethane)
Three (3) Mini Die grinders with 3 Unique Bits
Electronic-Controlled Heat Gun (DF-900HG)
Double End Nylon Dolley (DF-900DEND)
Round Head Nylon Chisel (DF-900RHND)
Aluminum Tape (DF-EZN1-AT150)
Multi-Clip Pliers (DF-625)
Plastic Clip Pliers (DF-624CP)
Clip Lifter (DF-618CL)
Hand Seamer (DF-EZN1HS)
Ring Hammer (DF-903)
Dust Cover
Utility Wedge Set (DF-609)
Plastic Lever Scraper (DF-WK20)
Heat Gun Holster
Lockable Cabinet with Keys
5 Year Manufacturer Warranty
High-Performance Tools for Body Shops & Auto Repair Professionals
At KGM Equipment, our mission is to support automotive professionals with tools and equipment that make a real difference in daily shop performance. We understand the demands of a fast-paced shop environment, where efficiency, accuracy, and durability are non-negotiable. That’s why every product in our catalog is carefully selected for its ability to help you work faster, smarter, and with greater precision.
Whether you're engaged in metal fabrication, detailed paintwork, or complex collision repair, we provide the right tools to keep your workflow running smoothly. Our selection includes everything from high-quality specialty accessories to heavy-duty cleaning equipment designed to handle tough jobs. Every item we offer is backed by performance, reliability, and practical value—because we know that in the shop, your tools need to work just as hard as you do. At KGM Equipment, we don’t just supply tools—we deliver dependable solutions that help you achieve better results every time.
Precision Work Made Simple with the Bumper Perfect Hole Punch
One of the most time-saving tools in our catalog is the bumper perfect hole punch. This compact tool is designed to deliver clean, accurate holes in plastic bumpers with minimal effort. Whether you're installing sensors, clips, or mounts, you’ll appreciate the speed and consistency this tool offers.
The bumper perfect hole punch takes the guesswork out of modifying bumpers. It’s ideal for both OEM work and aftermarket installations. Used by body shops nationwide, this tool improves workflow, reduces mistakes, and ensures a professional finish every time. If you're still cutting by hand, this is the upgrade your team will thank you for.
Mobility Matters: The Innovative Truck Bed Dolly
Working on truck beds or large panels? You need a mobile solution that makes handling easier and safer. That’s where the innovative truck bed dolly comes in. Built for strength and maneuverability, it supports heavy components while allowing full access for sanding, painting, or welding.
When it comes to working on truck beds, oversized panels, or heavy vehicle components, mobility can make all the difference. That’s why the innovative truck bed dolly has become an essential piece of equipment in many modern body shops. Designed with both strength and maneuverability in mind, this dolly allows technicians to safely support and move large parts with ease, without compromising stability or access.
Whether you're preparing a surface for paint, performing structural repairs, or welding, the truck bed dolly gives you 360-degree access to the component. This enables a more thorough, efficient, and comfortable workflow. No more bending awkwardly or repositioning heavy parts multiple times. The dolly holds everything securely while letting you focus on precision work.
This tool is especially valuable in collision repair centers, restoration shops, and custom build facilities, where large panels are frequently removed and refinished. By making transport and positioning easier, the truck bed dolly not only increases productivity but also significantly reduces the risk of accidents, strain injuries, and costly damage to freshly painted or prepped surfaces.
With rugged wheels, height adjustability, and a heavy-duty frame, it’s built to handle real shop environments and repeated daily use. When mobility matters and efficiency counts, the truck bed dolly is the tool that helps your team work faster, smarter, and safer.
Hustle Smarter with the Hustler Stick
Every shop needs tools that help technicians move quickly and with precision. The hustler stick is a simple but essential item for guiding panels, adjusting alignment, or maneuvering parts during assembly. Whether you’re doing bodywork or prepping a vehicle for paint, the hustler stick helps you keep control without putting your hands at risk. Its compact size and durable design make it a go-to in any bay where speed and accuracy are key.
Deep Cleaning Power with Steam Jenny Pressure Washers
Cleanliness is a critical part of any auto repair or detailing job. That’s why we stock Steam Jenny pressure washers—trusted for their powerful performance and reliability. Whether you're removing grease, prepping surfaces, or detailing a finished vehicle, these machines deliver serious cleaning capability.
It combines heat and high pressure to tackle the toughest grime without harsh chemicals. They’re ideal for shop use, fleet maintenance, and equipment cleaning, offering the performance professionals need day in and day out.
Equip Your Shop with Tools That Work
At KGM Equipment, we understand the importance of using the right tool for the job. Whether you're investing in a bumper perfect hole punch, rolling in a truck bed dolly, or deep-cleaning with a Steam Jenny pressure washer, you can count on quality, durability, and performance. Explore our collection today and take your shop workflow to the next level—with tools that make every task easier, safer, and more precise.
Frequently Asked Questions
What types of shops benefit from your specialty tools?Our tools are designed for collision repair centers, auto body shops, restoration facilities, and mobile technicians. Whether you're doing fabrication, paintwork, or detailing, our equipment is built to meet the real demands of professional automotive environments.
What is the bumper perfect hole punch used for?The bumper perfect hole punch creates precise, clean holes in plastic bumpers—ideal for installing sensors, clips, and mounts. It's a fast, reliable alternative to manual cutting and helps ensure professional, repeatable results every time.
Is the truck bed dolly adjustable or suitable for all truck models?Yes. Our truck bed dolly is designed for universal compatibility with most truck beds and large body panels. It offers height adjustability and a heavy-duty frame to safely support and move components during repairs, paintwork, or fabrication.
What does the Hustler Stick do?The Hustler Stick is a lightweight alignment tool used to guide panels, adjust positioning, and maneuver parts during assembly or repairs. It gives technicians better control while keeping hands safe, making it perfect for fast-paced work.
Are Steam Jenny pressure washers safe for auto detailing?Absolutely. Steam Jenny pressure washers combine heat and high pressure to remove dirt, grease, and debris without using harsh chemicals. They're widely used for auto detailing, fleet cleaning, and shop maintenance due to their effectiveness and reliability.
Can your support team help me choose the right tool for my shop?Yes. Our experienced team is available to help you choose tools that match your workflow, budget, and shop needs. Whether you're expanding or upgrading, we’ll guide you to equipment that delivers real value and performance.