-
DentFix DF-EZN1G EZ Nitrogen Plastic Welder – Generator
The DF-EZN1G EZ Nitro Plastic Welder Generator eliminates the need for refilling nitrogen tanks and has a smaller footprint taking up less space in the shop thanks to its onboard nitrogen generator. The proprietary Flow Adjust Switch Technology (FAST) system makes the DF-EZN1G the easiest nitrogen welder to learn and use. It simplifies nitrogen welding and eliminates flow adjustments by the user. This significantly reduces the time to set up the welder and gets the work done FAST.
Equipped with two welders, the DF-EZN1G EZ Nitro Generator incorporates both a nitrogen welding torch and an airless welding torch. The nitrogen torch is air cooled. It is essential to establish and maintain air flow before turning the welder on, and air flow must be maintained until the nitrogen torch cools down. (Usually 10 minutes to cool down after powering down)
The unit comes with plastic rod in various types and sizes to enable the user to weld different types of plastic and different types of damages. Also included is a roll of aluminum tape to hold parts together when welding. The hand seaming tool help shapes, flatten, and insure that repaired flanges and tabs are the correct thickness.
The cart is equipped with a heat gun holster, and a power strip for powering other tools.
The welder uses 110volts and a maximum of 10amps, total consumption is a maximum of 600watts.$4,386.64$4,984.81DentFix DF-EZN1G EZ Nitrogen Plastic Welder – Generator
$4,386.64$4,984.81 -
CMO – Electro Power Auto Body Repair & Alignment System – Combo Kit
Product Description
The CMO Electro Power Combo Kit is a portable, battery-operated 5-ton pulling and alignment system designed for the collision and autobody repair industry. This innovative tool is ideal for a wide range of repairs—including aluminum, steel, and adhesive work—and offers multiple repair methods to streamline your workflow. Its revolutionary design not only enhances repair quality but also increases efficiency, potentially becoming the most indispensable tool in your shop.
$4,384.00$5,041.60CMO – Electro Power Auto Body Repair & Alignment System – Combo Kit
$4,384.00$5,041.60 -
Chief EZ Liner II Frame Machine Hydraulic Pump – 5 Ton
This is the original pump used for the chief EZ Liner II Frame machines, works with the 5 Ton towers that are on your Chief EZ liner II Frame machine. This pump will fit directly into your frame machine pedestal and includes the original steel shaved reservoir tank. This is the same OEM pump that chief used in the original EZ liner II and is manufactured in the USA, this is the same pump as the original Chief pump # 690515. The Up & Down switch is the same as the original and is plug and play and is included with purchase.
- Pump is the original OEM pump used by chief part # 690515
- Works on Chief Ez Liner II frame machine
- Work on Chief Classic frame machine
- Pump is equipped with the original steel shaved reservoir tank
- Pump is manufactured by Power Team / SPX
- 5 Ton pulling power
- Includes Up & Down switch (plug and play)
- Oil does not ship with this pump (use AW46 Hydraulic oil from your local vendor)
- See all photos for more information
- Free Shipping
NOTE # 1. This pump will fit into your pedestal with no modifications needed
NOTE # 2. If you have questions call be purchasing
NOTE # 3. This pump will NOT work on LARGE S-21 Frame machines
NOTE # 4. NOTE: Do not use tractor hydraulic oil
Please contact us if you have any question prior to purchase
Other notes
This is the original chief EZ liner II frame machine pump part # 690515
Specifications
- 1/2 HP for single acting Cylinders
- 110/115V – 50/60 HZ
- 10A – 1 Phase
- Max 3450 rpm – with Solenoid
- 2 Gallon Welded & shaved side reservoir or (462in3)
- Shipping weight 72 lbs
- Max 10,000 psi
- AW-46 Hydraulic Oil
UPC: 3503634122126
$4,372.50$5,028.38Chief EZ Liner II Frame Machine Hydraulic Pump – 5 Ton
$4,372.50$5,028.38 -
Replacement Chief Style Frame Anchoring Stands – Generation 3
Replacement Chief Style Frame Anchoring Stands – Generation 3: Elevate Your Frame Machine Performance
Upgrade your frame machine to the next level of precision and compatibility with our state-of-the-art Replacement Chief Style Frame Anchoring Stands – Generation 3. Crafted to meet the highest standards, these stands are comparable to Chief 3rd Generation clamps (p/n 702083), delivering seamless integration and unparalleled performance.
Key Features:
- Versatile Compatibility: Our Replacement Chief Style Frame Anchoring Stands – Generation 3 are engineered to work effortlessly with a wide range of frame machines, including Chief S-21 & S-21M, EZ-Liner II, Classic & EZ 25, Goliath, Impulse, Impulse E-VHT, Stream Liner, Excelerator, Chisum, Freedom, Signature, and Proline Frame systems. Enjoy the flexibility of upgrading from the old style system without any modifications.
- Universal Anchoring Stand Metric Package: The set includes four anchoring stand assemblies, providing you with the perfect solution for your frame machine. Each package is designed to ensure a precise fit and reliable performance.
- High-Quality Construction: With a powder coat finish, our Replacement Chief Style Frame Anchoring Stands – Generation 3 offer excellent durability and resistance to wear and tear, ensuring a lasting investment for your frame machine.
- Complete Bolts Kit: The package includes new bolts and metric fastener bars, further streamlining the installation process and enabling seamless compatibility with your frame machine.
- Non-OEM Aftermarket Excellence: As a non-OEM aftermarket replacement part, our stands deliver the same level of quality and performance as the original Chief 3rd Generation clamps (p/n 702083), ensuring your frame machine maintains peak performance.
- Convenient Free Shipping: We take care of your convenience by offering free shipping on this product, making sure it reaches your commercial address efficiently.
Upgrade Your Frame Machine Today!
Take advantage of our Replacement Chief Style Frame Anchoring Stands – Generation 3 to elevate your frame machine’s performance to new heights. Enhance your productivity and achieve precise results for a wide range of frame machines.
For any inquiries or assistance in selecting the correct anchoring package for your rack, please don’t hesitate to contact us. We are here to help.
- Set of 4 Anchoring stand assemblies
- Compare To and Replaces Chief p/n 702083
- Works on Chief S-21 & S-21M
- Works on Chief EZ-Liner II, Classic & EZ 25
- Works on Chief Goliath, Impulse, Impulse E-VHT
- Works on Chief Stream Liner, Excelerator
- Works on Chisum, Freedom, Signature, Proline Frame system
- Includes New Bolts Kit
- Includes (4) 5 1/4 inch Metric Bolts
- Includes (4) Metric Fastener Bars
- Powder Coat Finish
- Includes Free Shipping
- Shipping Weight 365 lbs
This item ships by LTL (TRUCK) – We do not deliver this item to residential addresses – Deliveries will be to commercial address only.
$4,360.00$5,886.00Replacement Chief Style Frame Anchoring Stands – Generation 3
$4,360.00$5,886.00 -
Mo-Clamp 5078 #10 Tool Board
MO-Clamp 5078 #10 Tool Board with Tools Including:
#0200 C Clamp
#0205 Dyna-Mo C Clamp
#0300 JR Clamp
#0305 Dyna-Mo Jr Clamp
#0405 Dyna-Mo W Clamp
#0550 T.O. Clamp
#0660 Long Nose Clamp
#0670 Baby Box Clamp
#0680 Big Mouth Clamp
#1250 Panel Puller
#1300 Sill Hook
#1800 Track Hook (2 Each)
#2400 Adapter Plate
#3110 Small Flat Nose Sheet Metal Hook
#3130 Large Flat Nose Sheet Metal Hook
#4130 Hole Plug (2 Each)
#4145 Double Grab Hook (2 Each)
#5616 Door Post Puller/Twister
#5800 G Clamp
#6311 “T” Hook Tie-Downs (2 Each)
#6302 Slide-Through Sling
#6350 Cable Sling
#6400 Deep Hook Set
#5079 Tool Board with Hooks
105lbs$4,181.03$5,750.09Mo-Clamp 5078 #10 Tool Board
$4,181.03$5,750.09 -
OTC 4044 Ram Runner Two-Stage Hydraulic Pump with 2 Position/2 Way Manual Valve and 6′. Remote Control
OTC 4044 Ram Runner Two-Stage Hydraulic Pump with 2 Position/2 Way Manual Valve and 6 ft. Remote Control -Supplied with one gallon and two quarts of oil. Special order item only, please call customer service.
$4,051.55$4,659.29 -
Lift King bed lift – Main Component Only Lift King
Product Description
Lift King Light Duty Plus Bed Lifting and bed dolly system
The Lift King Light Duty bed lift and storage MAIN UNIT ONLY, bed removal system comes with everything needed for one technician of any size to remove or install OEM pickup boxes of all sizes, including up to 8’ dually boxes. Lift King Main Component quickly converts from the stored position to the working position without needing any tools. Bed box can be removed in as little as five minutes including the original set up time. After removal, the box can easily be moved around the shop and stored as needed. This will also remove beds w/o removing rear bumper. Safely store this in a 3′ X 3′ area
- Main Unit only (This is for shop who already has a complete system)
- 1 Technician required to remove bed
- Improves productivity (multiple technicans not required)
- Works with little or limited cab to bed clearance
- Lift bed to desired height when repairs are required
- Increases productivity when performing fuel pump replacements
- Mitigates and limits risk of damages
- Lowers risk of employee fatigue, strain and injury
- safest and most efficient way to remove or install a pickup box
- Compact design allows storage in a 3′ X 3′ area
- Ships LTL (large truck)
$4,000.00 -
Zinko ZJJ-5025 50ton 10″ Stroke Journal Mechanical Jack
Zinko ZJJ-5025 50 Ton 10″ Stroke Journal Mechcanical Jack- Beveled ring gear interlocks with the precision forged pinion to provide shifted tooth actuation. Extremely strong, precise interlocking gears.
Unique ratcheting handle shaft design with nickel-chrome constructed wheel and plunger enables user to obtain powerful worry free pinion rotation, allowing for an easy and smooth operation. Buttress threads will not creep down under load. Operable vertically or laterally (lateral movement requires optional traversing bed). Unique ring gear bearing allows extremely long life and smooth rotational advance. Rigid lifting screw is made from Chrome-molybdenum steel to withstand excessive loads.
Made in Japan.Minimum Height 17.50 inches.
$3,984.47$4,553.68Zinko ZJJ-5025 50ton 10″ Stroke Journal Mechanical Jack
$3,984.47$4,553.68 -
$3,783.99
$4,324.55Zinko ZN-100 100ton Standard Bottle Jack
$3,783.99$4,324.55 -
HeatMAX Deluxe Induction System by Dentfix
The DF-HM90DX HeatMAX Induction System has five interchangeable inductors to transform how body shops approach Paintless Dent, Repair, Glass /Panel Removal, and Disassembly.
Paintless Dent Repair – Hail damage repair work can be slow, tedious, and often come in huge waves that will overrun a shop, if they are not prepared. Induction is the quickest way to save the factory paint (and your precious time) when performing minor PDR repairs, in multiple areas, on a damaged vehicle.
Glass & Bed Liner – Gently removes bonded glass, windshields, panoramic roof, and rear quarter light without damaging the trim. In addition to glass, the glass inductor can remove Spray-On Bedliner, Metal Bond Adhesives, and Sheet Molding Compound
(SMC) panels.
Dissasembly – Gently Warm it Up or get the metal part Red Hot, Quickly!
Pad : Vinyl Graphics, Sound Pads,Vapor Barriers, Moldings, Emblems, & Decals.
Bolt : Nuts/Bolts, Body Caulking, & Seam Sealers.
Spiral : Bearings, Gears, Pulleys,Oxygen Sensors, & Nuts/Bolts.
Tough jobs get done with induction heating. Make your life easier with the HeatMAX Induction System!Application
A powerful, instantaneous induction heating system ideal for bodywork, mechanics and maintenance.
Feature & BenefitsAuto or Manuel Mode – No need to memorize different settings. Just turn it on and go.
No Flame Max Heat – Safely isolate the heat to accurately target the desired part.
Glue Destroyer – Easily eliminate adhesion without damage to surrounding parts.
IncludesHeatMAX Induction Unit
PDR Inductor
Glass Inductor
Pad Inductor
Bolt Inductor
5 Piece Spiral Inductor with Case
Foot Activated Pedal Trigger
3 Piece Trim Wedge Set
Mobility Cart
StorageIncludes Mobility Cart and a Rugged storage case for the Spiral Inductor Set.
$3,750.00$3,800.00HeatMAX Deluxe Induction System by Dentfix
$3,750.00$3,800.00 -
Replacement Chief EZ Liner II pump – 5 Ton Pull Power
Chief EZ Liner II pump – Replacement
This is the replacement EZ Liner II Frame machine 5 Ton hydraulic pump.We have this pump configured to replace the OEM pump and designed to provide for a seamless hook up and implementation.
- Compare to Chief Part # 690515
- Works On Chief Ez Liner II and Classic Frame machine
- Pump is Manufactured by Power Team / SPX
- 10,000 Psi Pump Pressure for 5 Ton Frame Machines
- If you have questions please contact us before placing your order.
- Includes Up & Down Switch
- Oil Does not Ship with these units (use AW46 Hydraulic oil from you local vendor)
- Free Shipping
Please note that this pump will not fit inside the the center Pedestal.
The original pump for this machine is no longer made and there is
no other pump produced at this time that will fit in that space that meets
the specifications necessary to operate the EZ liner II machine.NOTE: This pump will NOT work on LARGE S-21 Frame machines
Please contact us if you have any question.
This is a Non-OEM, Aftermarket, Replacement Part That Replaces Original.
NOTE: Original pump is no longer manufactured.
Specifications
- 1/2 HP for single acting Cylinders
- 110/115V – 50/60 HZ
- 10A – 1 Phase
- Max 3450 rpm – with Solenoid
- 2 Gallon Thermoplastic Reservoir or (462in3)
- 18.5 H X 11.375 L X 9.25 W
- Shipping weight 72 lbs
- Max 10,000 psi
- AW-46 Hydraulic Oil
NOTE: Do not use tractor hydraulic oil
$3,535.00$4,772.25Replacement Chief EZ Liner II pump – 5 Ton Pull Power
$3,535.00$4,772.25 -
Replacement Chief Pump Power Team Ten Ton Hydraulic Pump (USED)
- SKU:
- CJ-BHK-PUMP-SL-01
- UPC:
- 3503634122362
- Shipping:
- FREE
$3,500.00
